江苏春晨电缆有限公司：https://www.ybzhan.cn/st82365/JBQ型橡皮绝护套引接线(JB1171-76)用途:该型号产品交流额定电压1140v以及以下的B级绝缘电机,电器绕组连接并引出机壳或绕组与电机壳体上的接线柱连接电线JBQ电机引接线

Wire and cable inspection is the strict implementation of the national policy on the quality of products, policies and the superior quality of wire and cable technology products and related products to ensure the quality of the system. Practice has proved that the quality of wire and cable products is related to the safety of electricity, the relationship between the quality of life of the people to improve, the relationship between the reputation of the enterprise. But the yield and quality of wire and cable products is not only judged out, but in the design and production process produced by two tests to determine the quality of products. JBQ电机引接线Product quality is a comprehensive reflection of the enterprise, so to improve the quality of wire and cable products is the responsibility of all employees. To improve product quality, we must promote the comprehensive quality management, rely on the masses, to ensure product quality. Product quality inspection is not only an important part of total quality management, but also an indispensable part of the production process to ensure product quality, is an important means to ensure the quality of products. Therefore, it is necessary to continuously strengthen the quality inspection of wire and cable products.

什么叫产品质量检验？产品质量检验就是借助于某种手段或方法，测定产品质量的特性，然后把测定的结果同既定的质量标准做比较，从而对该产品做出合格或不合格的判断。

What is the product quality inspection? Product quality inspection is by some means or methods, determination of the quality of products, and the determination results with the established quality standards for comparison, so as to make the product qualified or unqualified to judge.

检验总是对既定成果而言，因而也是“事后”的，所以，单纯的质量检验也称为事后检验，其主要任务是“把关”原材料不合格不进车间，半成品不合格不转入下道工序，即根据产品质量要求，把不合格品剔除出来，不使之投入生产转入下一工序或产品出厂。这种事后检验，对于防止不合格品混入生产或出厂，保证产品质量是*必要的。就我们企业目前的实际情况来看，今后必须检查严格地“把关”，毫不放松。但是，光靠检验毕竟还是被动的，把保证产品质量的重点放在检验上是不能从根本上解决质量问题的。把关再严，也只是把废品挑选出来，而不能解决产生废品的原因等问题，应实行把关与积极预防相结合，以预防为主的原则，以及检验人员实行卡、防、帮、讲的工作方法。

The results of test is always established, hence "afterwards", so called pure quality inspection after the inspection, the main task is to "check" unqualified raw materials into the workshop, semi-finished products unqualified into the next process, according to the requirements of product quality, the unqualified rejection, investment don't make the production into the next process or product factory. This post hoc test, for the prevention of substandard products mixed with the production or factory, to ensure product quality is compley necessary. On the actual situation of our enterprise at present, must check strictly "gatekeeper" in the future, we. However, after all, the test is passive, to ensure product quality focus on the test is not a fundamental solution to the quality of the problem. Checks to be strict, just picked up the waste, and can not solve the problem of waste generated reasons, should be implemented to ensure the combination and active prevention, prevention principle, implementation method, and help prevent work card and inspection personnel.

卡：即把关；防：即预防产生废品，防患于未然；帮：及对操作人员进行技术指导，共同解决质量问题；讲：即宣传质量*的方针，就是针对单纯质量检验的弱点提出来的。

Card: check; anti: preventing the waste generated, nip in the bud; help: and technical guidance to operators, to solve the quality problems; say: advocating the principle of quality first, quality inspection is only on the weaknesses.