SCHUNK传感器MMSK-22-PNP-China大量库存
时间：2017-07-19 阅读：475
各位做富士康、绿点的大佬请注意，祥树目前有一批雄克库存，中国定制型号，富士康、绿点，国内贸易商仅祥树可做，欢迎来询！不要怀疑，祥树跟雄克有签框架协议。也欢迎各位大佬咨询雄克其他型号产品，价格惊喜，给力！！！
MMSK-22-PNP-China为MMSK-22-PNP加长版，长度由3m增加至5m，更贴合现场实际需求。
以下为该产品相关资料
Description
Magnetic switches are used for monitoring the status of automation components. They detect the approach of a magnet without contact and, above a certain switching threshold, enable their output.
Field of application
Used for monitoring gripping and rotary modules, as well as linear modules, and robot accessories. Magnetic switches from SCHUNK detect metals without contact or wear, and are resistant to vibration, dust, and humidity. Magnetic switches are installed in slots and thus do not produce any additional interfering contours.
Technical data MMSK-22-PNP-China
| Ident.-Nr. | 301034 |
| Measuring principle | magnetic |
| Switching function | Closer |
| Type of switching | PNP |
| Number of switching points | 1 |
| min. ambient temperature [°C] | -10 |
| max. ambient temperature [°C] | 70 |
| LED display in sensor | yes |
| Type of voltage | DC |
| Nominal voltage [V] | 24 |
| Min. voltage [V] | 10 |
| max. voltage [V] | 30 |
| Voltage drop [V] | 2 |
| Max. switching current [A] | 0.005 |
| Cable connector/cable end | open wire strands |
| Cable length [cm] | 200 |
| Cable diameter [mm] | 2.1 |
| Min. bending radius (dynamically) [mm] | 21 |
| Min. bending radius (statically) [mm] | 10.5 |
| Product weight [kg] | 0.04 |
| Tightness IP (sensor) | 67 |
| CE | 0 |
现货图片如下，一盒25根。