High-Temperature Chamber Furnaces with Electric or Gas Heating

HT 04/16 HT 04/17 HT 04/18 HT 64/.. LTS HT 400/..High-Temperature Chamber Furnaces with Electric or Gas Heating

参考价: 面议

具体成交价以合同协议为准
2023-04-17 12:13:45
193
产品属性
关闭
安捷来国际股份(香港)有限公司

安捷来国际股份(香港)有限公司

免费会员
收藏

组合推荐相似产品

产品简介

High-Temperature Chamber Furnaces with Electric or Gas Heating

详细介绍

High-Temperature Chamber Furnaces with Electric or Gas Heating
HT 16/17 HT 160/17 with cooling fan, automatic vapor air flap control, and start-up circuit

Parallel motion swivel door for lasting protection of the collar insulation against destruction

Reinforced floor as protection for bottom insulation HT 32/16

Cooling fan

Pneumatically driven lift-door for opening at high temperatures as additional equipment

HTB 645/17 with fuel heating

Gass heating system

HT 04 - HT 450

The HT 04/16 ff. fibre insulated high-temperature furnaces are the ideal choice for sintering special glass, e.g. quartz glass or for melting trials in the laboratory. Excellent temperature uniformity, solid construction provide for the necessary competitive edge with resprect to quality (tabletop models see laboratory catalog).

  • Tmax 1600 °C, 1750 °C, or 1800 °C
  • Furnace sizes from 4 to 450 liters
  • High-quality molybdenum disilicide (MoSi2) heating elements
  • Parallel swivel door, chain-guided, enabling safe opening and closing without damage to the fibre insulation in the collar area, protection of user from radiation from the furnace
  • Door labyrinth sealing provides for optimum energy efficiency and temperature distribution
  • Door area amored with stainless steel to avoid burn damages
  • Reinforced floor as protection for bottom insulation as standard from models HT 32/16 upwards
  • Over-temperature limit controller for product and furnace protection
  • Furnace chamber lined with first-class, durable fibre material
  • Special ceiling construction with high durability
  • Thermocouple, PtRh-Pt, Type B or Type S
  • Vapor vent in the furnace roof
  • Description of the control system see page 42

Additional equipment

  • Cooling fan For cycle time acceleration furnace sized specific fans are installed. The fan speed is preselected per segment. The controller is automatically switched on and off. Hence, different speeds can be applied e.g. for binder removal or cooling. With HiProSystems-Controllers, lenear cooling is possible.
  • Furnace in HDB design featuring fresh air pre-heating, exhaust gas ventilation and an extensive safety package for debinding and sintering in one process, i. e. without transfering the material from the debinding furnace to the sintering furnace.
  • Automatic control of vapor vent flaps
  • Stainless steel exhaust gas hoods
  • Catalytic or thermal afterburners
  • Kiln furniture tailored to customer specifications
  • Lift door
  • Protective gas connector and seal of furnace casing to allow purging of furnace with protective gasses
  • Manual or automatic gas supply system
Gas-heated Chamber Furnace HTB

Besides our wide range of electrically heated high temperature chamber furnaces we can also offer gas heated models designed to suit your requirements. Please contact us.

Model Tmax Inner dimensions in mm Volume Outer dimensions in mm Supply Electrical Weight
°C w d h in l W D H power/kW connections* in kg
HT 04/16 1600 150 150 150 4 610 470 1400 5,2 3-phase¹ 150
HT 08/16 1600 150 300 150 8 610 610 1400 8,0 3-phase¹ 200
HT 16/16 1600 200 300 260 16 710 650 1500 12,0 3-phase¹ 270
HT 32/16 1600 200 600 260 32 710 930 1500 18,0 3-phase 350
HT 40/16 1600 300 350 350 40 810 710 1610 12,0 3-phase 380
HT 64/16 1600 400 400 400 64 1020 840 1700 18,0 3-phase 550
HT 128/16 1600 400 800 400 128 1020 1250 1700 26,0 3-phase 750
HT 160/16 1600 500 550 550 160 1140 1020 1900 21,0 3-phase 800
HT 276/16 1600 500 1000 550 276 1140 1470 1900 36,0 3-phase 1100
HT 450/16 1600 500 1150 780 450 1140 1620 2060 64,0 3-phase 1500
HT 04/17 1750 150 150 150 4 610 470 1400 5,2 3-phase¹ 150
HT 08/17 1750 150 300 150 8 610 610 1400 8,0 3-phase¹ 200
HT 16/17 1750 200 300 260 16 710 650 1500 12,0 3-phase¹ 270
HT 32/17 1750 200 600 260 32 710 930 1500 18,0 3-phase 350
HT 40/17 1750 300 350 350 40 810 710 1610 12,0 3-phase 380
HT 64/17 1750 400 400 400 64 1020 840 1700 18,0 3-phase 550
HT 128/17 1750 400 800 400 128 1020 1250 1700 26,0 3-phase 750
HT 160/17 1750 500 550 550 160 1140 1020 1900 21,0 3-phase 800
HT 276/17 1750 500 1000 550 276 1140 1470 1900 36,0 3-phase 1100
HT 450/17 1750 500 1150 780 450 1140 1620 2060 64,0 3-phase 1500
HT 04/18 1800 150 150 150 4 610 470 1400 5,2 3-phase¹ 150
HT 08/18 1800 150 300 150 8 610 610 1400 9,0 3-phase¹ 200
HT 16/18 1800 200 300 260 16 710 650 1500 12,0 3-phase¹ 270
HT 32/18 1800 200 600 260 32 710 930 1500 18,0 3-phase 350
HT 40/18 1800 300 350 350 40 810 710 1610 12,0 3-phase 380
¹Heating only beetween two phases *Please see page 42 for more information about mains voltage

索取资料

打印版本

High Temperature Top-Hat and Elevator Furnaces
Elevator-type furnace HT 64/17 LBS with additional insulation of the casing for melting glass HT 400/17 LTS with interchargeable tables as additional equipment

Open furnace at 1600 °C with lowered table

HT 64/16 LB - HT 276/17 LTS

In order to fulfill the high demands regarding a good temperature uniformity, high temperature top-hat and elevator furnaces are used. In the LB version the hat is stationary and the table is . This layout is only recommended if furnace must be opened hot. As additional equipment for opening in hot condition the furnace frame is additionally insulated in order to avoid burns of the system. The LT version with top-hat and stationary table is recommended when sensitive settings are charged.

Standard version different from chamber furnaces HT 04/16 ff.

  • Design as top-hat or elevator furnace (lift-top or lift-bottom principle)
  • Standard furnace size ranging from 64 to 276 liters
  • Electrical top-hat or table spindle drive practically free of vibration
  • Furnace closes safely and tightly due to a labyrinth-sealing and additional sand sealing
  • Floor reinforcement for heavy loads with level stack charging provides for protection of the fiber insulation

Additional equipment different from chamber furnaces HT 04/16 ff.

  • Exchangeable table system with second table
  • Electrical table drive
  • Automatic control of all movements
  • Insulated furnace rack for hot opening, i. e. for melting glass, for instance
Model Tmax Inner dimensions in mm Volume Outer dimensions in mm Supply Electrical Weight
°C w d h in l W D H power/kW connections* in kg
HT 64/.. LTS 1600
or
1750 400 400 400 64 950 1700 2450 39 3-phase 1300
HT 166/.. LTS 550 550 550 166 1100 2100 2500 47 3-phase 1500
HT 276/.. LTS 1000 500 550 276 1600 2150 2500 74 3-phase 2000
HT 400/.. LTS 1200 600 550 400 1800 2250 2500 76 3-phase 2700
*Please see page 42 for more information about mains voltage

索取资料

打印版本

High-Temperature Furnaces HFL as floor Models with Brick Insulation for Melting Experiments
HFL 16/16 HFL 295/13 with lift door and transformer in stand, with customer-specific design

Protective screen in front of heating elements for protection against mechanical damage

HFL 16/16 - HFL 160/17

Model range HFL 16/16 HFL 160/17 is characterized by its lining with robust light refractory bricks. This version is recommended for processes producing aggressive gases or acids, such as under glass melting.

  • Tmax 1600 °C or 1700 °C
  • High-quality molybdenum disilicide (MoSi2) heating elements
  • Insulation with light refractory bricks and special backup insulation
  • Type B thermocouple
  • Furnace sizes of 16 to 160 liters
  • For the release of vapours, a 30 mm large exhaust hole is integrated into the roof of the furnace
  • Over-temperature limit controller for protection of material

Additional Equipment

  • Exhaust air flap controlled manually or automatically for better ventilation of furnace chamber
  • Fan for better ventilation of combustion chamber and for fast cooling of the furnace
  • Protective gas connector and seal of furnace casing to allow purging of furnace with protective gasses
  • Manual or automatic gas supply system
Model Tmax Inner dimensions in mm Volume Outer dimensions in mm Power Electrical Weight
°C w d h in L W D H kW connection* in kg
HFL 16/16 1600 200 300 260 16 770 830 1550 12 3-phase¹ 500
HFL 40/16 1600 300 350 350 40 880 880 1710 12 3-phase 660
HFL 64/16 1600 400 400 400 64 980 930 1830 18 3-phase 880
HFL 160/16 1600 500 550 550 160 1090 1080 2030 21 3-phase 1140
HFL 16/17 1700 200 300 260 16 770 830 1550 12 3-phase¹ 530
HFL 40/17 1700 300 350 350 40 880 880 1710 12 3-phase 690
HFL 64/17 1700 400 400 400 64 980 930 1830 18 3-phase 920
HFL 160/17 1700 500 550 550 160 1090 1080 2030 21 3-phase 1190
¹Heating only between two phases *Please see page 42 for more information about mains voltage
诚招区域总代理
安捷来国际股份公司作为仪器设备领域的专业公司,创业多年,集科、工、贸为一体,在香港设立安捷来国际股份(香港)有限公司,在中国大陆设立北京安捷来勒科技有限公司(注册资本1000万)、珠海安捷来科学仪器有限公司等子公司,并陆续在国内各大城市建立营销及售后服务网络。为了更好地服务于珠江三角洲地区及国内客户,珠海安捷来科学仪器有限公司在提供上等的进口仪器的同时采用国际**的生产技术生产各种高品质的环境试验仪器。
主营产品:日本TAITEC多功能分液漏斗振荡器SR-2DW/2DS,试管浓缩仪TC-8F,微孔板·多孔板振荡器E-36等振荡类&生物类仪器;日本YAMATO高压**器、高温炉及干燥箱等常规科学仪器;美国PROTON气体发生器等;还即将加入更多上等产品。
目前,公司为进一步扩展国内市场,特向国内各地正在成长中的公司及个人诚招部分产品的区域总代理。诚挚欢迎您,。
联系电话:/12/13
info
详情请进入
.cn

希望你我的合作将共同搭建一个幸福的桥梁!进口品牌 十年保证 只做优异 坚守品质!诚信**、互利共赢!

注:1、申请需提供公司三证、经营品牌及经营状况、负责人个人简历等资料。
2、我公司将于2013年10月23日-26日,在北京展览馆举行的第十五届北京分析测学术报告会及展览会(2013BCEIA) 上展示部分展品,有兴趣者,欢迎前往参观,3号馆3014、3031展位。
“高压**器、振荡器、试管浓缩仪”
年底客户真情回馈


为了回馈客户对我们的支持和厚爱,我们将于2014年春节之前进行“年底客户真情回馈"活动。具体如下:


时间
:2013年10月1日-2014年1月31日

形式


1.购买
TAITEC微孔板振荡器E-36,可获赠倍斯特10400毫安移动电源或小熊负离子空气净化器一台。


2.购买
YAMATO高压**器TAITEC多功能振荡器SR-2DW/2DSTAITEC试管浓缩仪TC-8F/G任意一台,可获赠台电8英寸四核超薄平板电脑或亚都负氧离子空气净化器一台。


3.一次购买达十万元以上,便可免费获赠苹果iPad mini或飞利浦专业多功能空气净化器一台。


4.凡在2013年10月1日至2014年1月31日期间,下单的直接用户即买即送。经销商不能参加,申请特别折扣的用户不能参加。若有赠品缺货或停产情况,则选送同等价位的其他产品。

上一篇:VPSA制氧技术:玻璃行业火焰抛光用氧选择 下一篇:扬声器振膜用玻璃纤维布 黑色玻璃丝布厂家指南
热线电话 在线询价
提示

仪表网采购电话