皮秒激光器,pl2210-激光器件-上海尖丰光电技术有限公司手机版

详细介绍

pl2210系列二极管泵浦皮秒Nd：YAG激光器

产品简介:

短脉宽、高能量，高达2 kHz的重复率和优良的脉冲稳定性进行pl2210系列二极管泵浦皮秒激光器的许多应用的，如材料加工、激光光谱学、光学参量发生器泵和其他任务。

产品特点：

高脉冲能量
二极管泵浦固体设计
空气冷却,不需要外部供水
交钥匙工程
维护成本低
可选条纹相机触发脉冲与< 10的均方根抖动
遥控板
通过USB接口与PC机提供的控制
LabVIEW? drivers
可选的温度稳定性，第二，第三，第四谐波发生器

产品应用：

时间分辨荧光，泵浦-探测光谱
OPG/OPA/OPO泵浦
其他光谱和非线性光学中的应用
激光遥感

Specifications ¹⁾

Model		PL2210	PL2210A	PL2210B	PL2210B-TR	PL2210C
Output energy
at 1064 nm	0.4 mJ		0.9 mJ	2.5 mJ	2.5 mJ at 1 kHz 5 W at 88 MHz	2.5 mJ / 5 mJ
at 532 nm²⁾	0.2 mJ		0.45 mJ	1.3 mJ	-	1.3 mJ / 2.5 mJ
at 355 nm³⁾	0.11 mJ		0.3 mJ	0.8 mJ	-	0.8 mJ / 1.3 mJ
at 266 nm⁴⁾	0.05 mJ		0.15 mJ	0.5 mJ	-	0.5 mJ / 0.8 mJ
Pulse energy stability (Std. Dev)⁵⁾
at 1064 nm	0.5 %
at 532 nm	0.8 %					#colspan#
at 355 nm	1 %
at 266 nm	2.5 %
Pulse duration (FWHM) ⁶⁾	25±2 ps		25±2 ps	80±8 ps	100±10 ps	25±2 ps / 80±8 ps
Pulse duration stability ⁷⁾	±1 ps		±1 ps	±3 ps	±3 ps	±1 ps / ±3 ps
Pulse repetition rate ⁸⁾	1 or 2 kHz		1 kHz		1 kHz / 1 MHz	1 kHz
Triggering mode	internal/external
Typical SYNC OUT pulse delay^{9) 10)}	-500...50 ns
SYNC OUT pulse jitter (Std. Dev)	<0.1 ns rms
Spatial mode¹¹⁾	TEM₀₀
Beam divergence¹²⁾	<1.6 mrad
Beam diameter ¹³⁾	~3 mm
Beam pointing stability ¹⁴⁾	<30 μrad
Pre-pulse contrast	>200:1
Polarization	linear, >100:1
Physical characteristics
Laser head size (W x L x H), mm ¹⁵⁾	455 x 1035 x 242				455x1235x242 mm
Power supply size (W x L x H), mm	365 x392 x 290			475 x 460 x 290		365x285x360 mm
Operating requirements
Water service	not required, air cooled
Relative humidity	10-80 % (non condensing)
Ambient temperature	22 ± 2 °C
power requirements	100-240 VAC, single phase, 50/60 Hz
Power consumption ¹⁶⁾	<0.5 kW		<1 kW	<1 kW	<2 kW	<1.5 kW

1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.
2) For PL2210x-SH and PL22210x-SH/FH options. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
3) For PL2210x-TH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
4) For PL2210x-SH/FH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
5) Averaged from 300 pulses at 1 kHz pulse repetition rate.
6) Optional 80±8 ps duration.
7) Measured over 1 hour period when ambient temperature variation is less than ±2 °C.
8) Should be specified when ordering. Inquire for custom pulse repetition rates.
9) In respect to optical pulse. <10 ps rms jitter is provided with PRETRIG option.
10) SYNC OUT lead or delay can be adjusted with 0.25 ns steps in specified range.
11) Gaussian fit >90%.
12) Full angle measured at the 1/e2 point at 1064 nm .
13) Beam diameter is measured at 1064 nm at the 1/e2 point.
14) Rms value measured from 300 shots.
15) 455×1235×250 mm (W×L×H) laser head size might be required for some optional configurations.
16) At 1 kHz pulse repetition rate.

Options

Option PRETRIG provides low jitter pulse for streak camera triggering with lead/delay in -150...150 μs range and <10 ps rms jitter.
Option P80 provides 80±8 ps output pulse duration. Main specifications:

Model	PL2210	PL2210A
Pulse energy¹⁾	0.7 mJ	1.2 mJ
Pulse duration (FWHM)	<80 ps

*At 1064 nm

Option PC allows reduction of the pulse repetition rate of the PL2210 series laser by integer numbers. Single shot mode is also possible. In addition, the –PC option reduces the low-intensity quasi-CW background that is present at laser output at 1064 nm wavelength. Please note that the output of fundamental wavelength and harmonics will be reduced by approx. 20% with installation of the –PC option.