德国Kleinwaechte手腕带静电场测试仪

PGT 50

人的pgt50提供*接地监督与手腕带。该装置安装在工作空间。接地发生在导电表表面的接地点处。电源是电源适配器。该tresholds可以调整很容易被客户自己的需求。校准可以由客户在规定的时间间隔内以简单和预算的方式完成。

带有10毫米按钮的腕带的连接能力的abs塑料外壳。*接地监督发生，这意味着该单位识别腕带是否已磨损。

德国Kleinwaechte手腕带静电场测试仪

显示器由两个LED组成，可以显示以下状态：

没有腕带连接/设备就绪

腕带连接tresholds /接地
腕带连接/电阻太小

腕带连接/电阻太高或不正确佩戴腕带

集成蜂鸣器提供额外的音频警告平行于红色LED。

简单的设置
该装置安装的配备电源插座在工作空间和连接接地电缆到桌面的一点接地。
在堵塞电源适配器后，设备处于就绪状态。绿色LED闪烁与0,5hz没有测量了。
的pgt50承认当腕带连接并启动监督。

规格：尺寸：96mm x 60毫米×23mm（长x宽x高）
重量：约150g
电源：电源适配器7,5v = / 150ma
显示：2个LED（红色，绿色），蜂鸣器
测量原理：
RC元件测频

PGT 50

The PGT50 provides a permanent grounding supervision of persons with wrist straps. The device is mounted at the working space. The grounding takes place at the grounding point of the conductive table surface. The power supply is a mains adapter. The tresholds can be adjusted by the customer easily to his needs. The calibration can be done by the customer in a easy and budget way in the mandatory intervals.

ABS plastic housing with connection ability for a wrist strap with 10mm pushbutton. A permanent grounding supervision takes place, meaning the unit recognizes if a wrist strap is worn. 

The display consists of two LEDs, that can display the following states:

no wrist  strap connected / device ready

wrist strap connected / grounding between tresholds 
wrist strap connected / resistance too small 

wrist strap connected / resistace too high or wrist strap not worn correctly

Integrated buzzer provides extra audio warning parallel to the red LED.

Easy setup
The device is mounted with the equipped power strips at the wrking space and connected with a grounding cable to the grounding point of the table surface.
After the plugging the mains adapter the device is in ready state. The green LED flashes with 0,5Hz and no measurings are made.
The PGT50 recognizes when a wrist strap is connected and starts the supervision. 

Specifications: Dimensions: 96mm x 60mm x 23mm  (L x W x H) 
Weight: approx. 150g  
Power supply: Mains adapter 7,5V= / 150mA 
Display: 2 LEDs (red, green), buzzer  
Measuring priciple:
 Frequency measuring over RC element