德国OPTOLOGIC测速仪

Model ASCOspeed 5500 Measuring range 1-3000 m/min Reference distance 300 ±15mm 300 ±30mm 1) Linearity ± 0.05% 2) 4) Repeatability ± 0.03% 3) 4) Resolution 0.1mm / 0.001 m/min Update-time (least averaging-time) 0.5ms Light source Power-LED (safety class 1) Signal conditioning compact housing with integral electronics Protection class IP65 (suitable for cold-rolling-mill application by using the stainless steel protective housing with air-purging and viton-seams) Vibration (DIN EN 60068-2-6) 2g / 20 … 500Hz, sinoidal Shock (DIN EN 60068-2-29) 15g / 6ms, half sinoidal Operating temperature 0°C to 50°C (without external cooling) Storage temperature -20°C to 70°C Output Standard: 2 encoder outputs (A, B, /A, /B), 3 alarm, 3 status Optional: 2 further encoder outputs (A, B, /A, /B), synchronisation output; analogue output (4 - 20mA) All outputs opto-insulated Digital Data-Interfaces Standard: 1x RS232 (Service or parameterization interface) Optional: 1x RS232, 1x RS232 o. RS422 (switchable) Optional: EtherCAT-ready (compatible with Beckhoff EL6021/KL6041) All serial interfaces are optically isolated Input Standard: Direction- and trigger inputs Optional: 3 further control- or pulse inputs All inputs optically coupled with current delimiter resistors LED 1. Signal (LED green/red) 2. Busy (yellow) 3. Error (red) Power supply 24VDC ± 15% / P < 50W Weight 5.6kg 1) Extended measuring distance with restricted measurement uncertainty of 0.1% 2) Deviation of the sensor characteristic for speed respectively length from a straight line, bigger than 15 m/s extended area with 0,1 % 3) Statistical probability 2 sigma, distribution measured at 5 m/s 4) Testing condition: metal surface, 10 m reference length, basic measuring distance 300 mm, temperature = 20 °C (constant), tilting less than 0,1 degree

德国OPTOLOGIC测速仪

标准:方向和触发输入

可选:3进一步控制或脉冲输入

所有输入与电流定界电阻耦合

1。信号(LED绿色/红色)2。忙(黄色)3。错误(红色)

电源24 vdc / P < 50 w±15%

体重5.6公斤

1)延长测量距离，测量不确定度为0.1%

2)传感器特性与直线距离的偏差，大于15m / s扩展面积为0，为1%

3)统计概率2西格玛，分布以5米/秒测量

4)测试条件:金属表面,10 m参考长度、基本测量距离300 mm,温度= 20°C(常数),

倾斜小于0,1度