瑞典Friborg跟踪测试仪

在正常使用时，绝缘材料可能暴露在潮湿环境中。
和污垢，可以创建带电部件之间的导电路径。
本试验设备模拟通过施加电压在两
放在被测试的材料的电极。导电的溶液
允许落在电极之间的材料，以便
电流在材料表面。
技术规格
•全自动测试
电控精密泵
•封闭测试和风扇取出气体柜
•铂电极的测试标准要求
•电极电压100-600伏
•大型1800 VA变压器足够的短路电流也
在较低的电压，通过测试标准要求
•安全运行的绝缘变压器和联锁开关
•间隔时间：30秒
•滴数计数器
•故障指示超过0.5个2秒
•短路电流可调至1 A
•指标测试情况：测试/准备/失败

瑞典Friborg跟踪测试仪

During normal use, insulation material may be exposed to moisture
and dirt that can create a conductive path between live parts.
This test equipment simulates this by applying a voltage on two
electrodes placed on the material to be tested. A conductive solution
is allowed to drop on the material between the electrodes so that a
current can flow on the surface of the material.
Technical specifications
• Fully automatic testing
• Electronic controlled precision pump
• Closed cabinet for testing and fan to take out gases
• Platinum electrodes as required by the test standard
• Electrode voltage 100-600 VAC
• Large 1800 VA transformer for sufficient short circuit current also
at lower voltages, as required by the test standard
• Insulating transformer and interlock switch for safe operation
• Interval between drops: 30 seconds
• Counter for number of drops
• Fault indication over 0,5 A in 2 seconds
• Short circuit current adjustable to 1 A
• Indicators for test status: Testing / Ready / Fail 

4200型跟踪测试仪
在正常使用时，绝缘材料可能暴露在湿气和污垢中，从而在带电部件之间形成导电通路。跟踪测试设备通过在被测试材料上的两个电极上施加电压来模拟这一点。导电溶液被允许滴落在电极之间的材料上，这样电流就可以在材料表面流动。
用于测试标准：
IEC 60112
IEC 60335-1附录N
IEC 60065
IEC 61010-1
IEC 61558-1
IEC 60884-1
UL 746