华测水平垂直燃烧试验仪HCRS
    
一、华测水平垂直燃烧试验基本简介:
 
华测水平垂直燃烧试验主要参照UL 94-2006、IEC 60695-11-4 、IEC 60695-11-3、GB/T5169-2008系列等标准采用规定尺寸的本生灯 (Bunsen burner) 和特定燃气源 ( 甲烷或丙烷 ) ,按一定的火焰高度和一定的施焰角度对呈水平或垂直状态的试品定时施燃若干次,以试品点燃、灼热燃烧的持续时间和燃烧长度等来评定其可燃性及着火危险性。
    

二、华测水平垂直燃烧试验仪的使用范围：

水平垂直燃烧试验仪主要针对 V-0 、 V-1 、 V-2 、 HB 、 5V 级材料的可燃性进行定级评定。适用于照明设备、低压电器、家用电器、机床电器、电机、电动工具、电子仪器、电工仪表、电气连接件和辅件等电工电子产品及其组件部件的研究、生产和质检部门,也适用于绝缘材料、工程塑料或其它固体可燃材料行业。
    
三、华测水平垂直燃烧试验仪详细的技术参数:
1、 燃烧器:内径φ9.5mm ± 0.3mm单气体及内径φ9.5mm±0.3mm混合气体本生灯各一个
2、 试验倾角:0°、20°、45°手动切换
3、 火焰高度:20mm ± 2mm 到180mm±10mm可调
4、 施焰时间: 0-999.9s±0.1s可调 
5、 余焰时间: 0-999.9s±0.1s,自动记录,手动暂停
6、 余灼时间: 0-999.9±0.1s,自动记录,手动暂停
7、 燃烧气体: 98% 甲烷气或98% 丙烷气( 一般情况可采用液化石油气代替 )
8、 流量压力:带双流量表及压力表(燃气及空气)
9、 温度测试范围:0~1000℃
10、火焰温度要求:从100℃±5℃升到700℃±3℃的时间在44±2秒及54秒±2秒之内
11、测温热电偶:φ0.5mm进口铠装(K型)热电偶二条
12、试验背景:黑背景
13、试验过程:试验程序手动控制,独立抽风
14、参照标准:UL 94-2006、IEC 60695-11-3、IEC 60695-11-4、GB/T5169.15、16、17、22-2008
15、工作室体积:0.75立方机箱(可定制其他尺寸)
16、设备外尺寸:1100mm宽×700mm深×1300mm高

Horizontal and vertical burning tester
A basic introduction, horizontal and vertical burning test:
Horizontal and vertical burning test mainly refer to UL 94-2006, IEC 60695-11-4, IEC 60695-11-3, GB/T5169-2008 series of standards set by the size of the Bunsen burner (Bunsen burner) and the specific source of gas (methane or propane), according to the test of flame height and flame angle to the horizontal or vertical state of the application of ignition timing several times, in order to test the duration of ignition, combustion and burning hot length to assess the flammability and fire hazard.
Two, the use of horizontal and vertical burning tester:
Horizontal and vertical burning tester is mainly for V-0, V-1, V-2, flammability, HB, 5V grade material for grading assessment. Suitable for lighting equipment, low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools, electronic instruments, electrical instruments, electrical connectors and accessories such as electrical and electronic products and components of the research, production and quality inspection departments, can also be applied to insulation materials, engineering plastic or other solid combustible materials industry.
Three, the detailed technical parameters:
1, the burner: inside diameter is 9.5mm + 0.3mm single gas and inner diameter of 9.5mm + 0.3mm gas mixture by a Bunsen burner
2, test angle: 0 degrees, 20 degrees, 45 degrees to manually switch
3, the flame height: 20mm + 2mm + 10mm to 180mm adjustable
4, the flame time: 0-999.9s + 0.1s adjustable
5, Yuyan time: 0-999.9s + / - 0.1s, automatic recording, pause manually
6, burning time: 0-999.9 + / - 0.1s, automatic recording, pause manually
7, the combustion gas: 98% or 98% propane gas (methane gas can be liquefied petroleum gas is generally used instead)
8, flow pressure: flow meter and pressure gauge (gas and air)
9, temperature measurement range: 0~1000 degrees
Requirements: 10, the flame temperature from 100 - 5 Deg. C up to 700 - 3 Deg. C time in 44 + 2 seconds and 54 seconds for 2 seconds.
11, the thermocouple: 0.5mm imported armoured thermocouple two (type K)
12, test background: Black
13, test: test procedures manual control, independent exhaust
14, the reference standard: UL 94-2006, IEC 60695-11-3, IEC 60695-11-4, GB/T5169.15, 16, 17, 22-2008
15, the studio volume: 0.75 cubic box (can be customized for other size)
16, the equipment size: 1100mm wide x 700mm x 1300mm high