品牌
经销商厂商性质
苏州市所在地
主要功能特点
1.满足IEC62716中关于氨气检测的试验要求，整个试验箱为我司，。
2.整个箱体采用无缝焊接密封，杜绝氨气泄露。
3.高耐腐蚀专用试样架以及内壁材料，保证了试验的正确性和稳定性，以及试验箱的使用寿命。
4.特殊设计的氨气回收装置。
5. 采用大屏幕真彩控制器，简洁明了的氨气试验专用界面，简单的编程设定，充分的数据储存手段：SD卡、S485、232等标准接口。
基本技术参数
| 容积和尺寸 Capacity and dimension | |||||||
标称内容积 Nominal interior capacity（milemeter) | 7.92 | ||||||
标称内箱尺寸 Interior dimension (mm） | W1500XH2200XD2400 | ||||||
门孔尺寸 Door hole size(mm) | 单开Single type W1200XH2200 | ||||||
| 性能 Performance | |||||||
温度范围 Temperature range | 20℃～+85℃ | ||||||
温度波动度 Temperature fluctuation | ±0.5℃ | ||||||
| 温度波动度（空载条件下，设备在稳定状态下，工作空间中心点温度随时间的变化量，实测温度与温度之的一半，以+-表示，即温度波动度 Temperature fluctuation (when the equipment is in stable and unladen condition, the variation value of middle point temperature of working space with the time, half of the actual max. temperature and min. temperature, it is called the temperature fluctuation) | |||||||
温度偏差 Temperature deviation | ±2℃ | ||||||
| 空载条件下，设备中心点在规定时间内测量的平均值与设备显示温度平均值之差，即温度偏差Temperature deviation (when unladed, the difference of the average value tested by the middle point of equipment within set time and the average value of temperature displayed by the equipment. It is called temperature deviation | |||||||
| 温度均匀度 Temperature uniformity | ≦2℃ | ||||||
| 空载条件下，设备达到稳定后，每次测试中实测温度与温度之差的算术平均值，即温度均匀度 When the equipment is stable and unladed, the arithmetic average of the difference between max. temperature and min. temperature of each test. It is called temperature uniformity | |||||||
| 湿度范围Humidity range | 25～99%RH(+20℃～+85℃)如图1所示 refer to Chart 1 | ||||||
相对湿度偏差 Relative humidity deviation | +2,-3%RH(>75%RH) | ||||||
| 空载条件下，设备中心点在规定时间内测量的平均值与设备显示温度平均值之差，即温度偏差when unladed, the difference of the average value tested by the middle point of equipment within set time and the average value of temperature displayed by the equipment. It is called relative humidity deviation | |||||||
氨浓度 Ammonia concentration | 0～10000ppm可调（adjustable) | ||||||
测试标准 Test standard | GB/T5170.2-2008 | ||||||
试验曲线 Specify test curve | 满足标准IEC62716氨检测试验要求(如图2所示） can meet Ammonia test standard IEC62716 (refer to Chart 2) | ||||||
