3EH-500Z digital switch round smooth vibrating animal single rod probe, which can effectively prevent the clip materials and adhesive materials: Determination of materialproperties and not subject to the conditions of installation, no adjustment after installation, you can put to use and stable; using piezoelectric elements Built with therods and thick wall stainless steel probe, only 8mm long absorber tube （similar ratio ofthe shortest）, high stability and vibration, anti-heavy loads, long life; based on the nature of the measured object, the proportion of different, selectable sensitivitydetermination （High, medium, low）; use of 15A high-capacity contact relay switch, you can directly control the motor; vibrating level switch is mainly used in powder, solid,viscous body, and other media。

Technical parameters

Power: 220V/105VAC50/60HZ

Power consumption: 2VA

Contact capacity: 250V 10A AC, 30V 5A DC

Vibration frequency: 280HZ

Delay time: measured （the vibration to stop） 0.5 seconds, recovery time （to stop thevibration） 1-2 seconds

Operating temperature: -30 ° -150 ° probe substrates Department Ministry of -30-70degrees

Pressure （MAX）: 20KGF/CM2 （1960KPA）

Sensor front-end loading: 100KGF （MAX）

Material: probe 0Cr18Ni9 （SUS304） Chassis ADC （surface spray）

Switch function: normally closed normally open common

Threaded connections A, B flange

Probe Length: Standard 189mm / lengthened 250-50000mm

Rod length L: （optional）

Thread Interface: NPT3 / 2, R3 / 2 （PT3 / 2）, etc.

Weight: 2.5KG

Accuracy: ± 1%