型号描述

8010 型 INLINE 流量开关，用于监控纯净的、与水类似的液体，所监控的液体中不能含有可被磁化的颗粒。开关由一个接头 (S010) 和一个电子设备模块 (SE10) 构成，通过一个卡口接头可以将两者快速、简单地相连。设备通过转接电子设备模块中所包含的簧片开关显示是否存在流量。可针对递增和递减的流动速度，通过一个位于电子设备模块上的调整螺栓在特定的范围内对“最小/”开关点进行调整。可提供两种 SE10 电子设备模块：- 无流量打开 (NO)：流量会将触点闭合。- 无流量关闭 (NC)：流量会将触点打开。该 S010 接头带有不同的接口，具有两种结构方式可用：- 带有一个小叶轮 «区域 1» 适合接头 DN15 至 40。- 带有一个大叶轮 «区域 2» 适合接头 DN32 至 50。

1）以低成本集成到管道系统中，不需额外的配管
2）磁性测量原理
3）通过调节螺栓简便地设置开关点

Type Description

The INLINE flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow. The sensor/switch is made up of a fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn. This device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points Min./Max. for rising and falling velocities can be set with a screw within a defined range. The SE10 electronic module is available in two version: -Normally open (NO): The flow switches on the contact. - Normally closed (NC): The flow switches off the contact. These S010 fittings are available in two versions: - with a short blade «Range1» fitted for the fittings DN15 to 40. - with a long blade „Range2“ fitted for the fittings DN32 to 50.

1）Economic integration in pipe systems without any additional piping
2）Magnetic measuring principle
3）Mechanical adjustment of setpoint