BLD-KW17刀具抗弯曲测试仪

一、刀具抗弯曲测试仪主要功能：

1、通过抗弯测试作为刀具抗弯的判断依据；

2、设计标准：ISO8442

二、主要技术参数：

1、 砝码重量：10N±0.2N（2个砝码）

2、 平衡导块：89mm*30mm*15mm （.03mm）

3、 塑胶平行尺：380mm*8mm

4、 刻度板：180mm*350mm(外环角度50°）

5、 亚克力护罩：530mm*290mm*93mm

6、 外形尺寸：长*宽*高：607mm*386mm*470mm

三、操作步骤

1、 将处理好的样品,固定在夹具上，使刀面与平行导块平行；

2、 移动角度尺，调节标尺中线与角度尺中线平行；

3、 将砝码挂在刀尖夹具下，扳动把手至砝码悬空，保持10S后，卸下砝码，查看其弯曲角度，如超过3°则不合格

BLD-KW17 tool bending tester

First, the main tool for bending resistance tester:

1, through the bending test as a tool to determine the basis of bending;

2, design standards: ISO8442

Two, the main technical parameters:

1, weight weight: 10N + 0.2N (2 weights)

2, balance guide block: 89mm*30mm*15mm (error 0.03mm)

3, plastic parallel ruler: 380mm*8mm

4, scale board: 180mm*350mm (outer ring angle 50 degrees)

5, acrylic shield: 530mm*290mm*93mm

6, external dimensions: length * width * height: 607mm*386mm*470mm

Three, operation steps

1, the processing of the sample, fixed on the fixture, so that the knife surface parallel with the parallel guide block;

2, the movement of the angle ruler, regulating the middle line of the ruler and the parallel line;

3, the weight hanging in the tip of the fixture, pull the handle to the weight of the suspension, to maintain the 10S, remove the weight, see its bending angle, such as more than 3 degrees are not qualified