IWATSU SY-8218/SY-8219 B-H Analyzer - DC-bias +POWER LOSS test system-长沙力高捷创仪器有限公司手机版

详细介绍

Automatic test on power inductor properties with DC biasing
		SMD Power inductorToroidal coil inductor DC bias current: 30A, max AC Ripple current: ±6A, max Test frequency(Sinusoidal): 10kHz to 3MHz Test frequency(Pulse): 10kHz to 1MHz (Duty10%-90%) Pulse(Triangular signal waveform in current at specimen, called QUASI-CHOPPER), or Sinusoidal test with DC biasing

DC Bias Tester SY-960 Specifications

Items		Specifications
Measurement Frequency	SINE	10kHz to 3MHz (with SY-8218), 10kHz to 1MHz (with SY-8219)
	PULSE	10kHz to 1MHz (Duty 10 to 90%)
Measurement Temp.		0ºC to +250ºC
Max. Input Current		±6A
Max. Input Voltage		±200V
Performance Guarantee Temp.		+18ºC to +28ºC
Operation Humidity		Less than 85%RH (+35ºC, No Condensation)
Warm up Time		Accuracy of current is the guaranteed value after the 30 minutes warm-up time.
Dimensions (mm)		330(W) x 320(D) x 200(H) Excluding projection
Weight		Approx. 6.7kg
Accessory		DCT Cable (SY-963) x 1, PCB1528-030 x 1, PCB5650-079 x 1 Thumbscrew for the terminal block: x 2, Blower brush x 1, Accessory Case x 1 Instruction Manual CD x 1, User's Guide (A4 size) x 1

ItemsSpecificationsPower SupplyAC100V to 240VPower ConsumptionMax. 640VA (with SY-962)Current ldcDC 0.00 to 30.0ACurrent Resolution0.01ACompliance VoltageMax. 10V (between H-L)Performance Guarantee Temp.+18ºC to +28ºCOperation HumidityLess than 85%RH(+35ºC, No Condensation)Dimensions (mm)420(W) x 480(D) x 221(H) Excld. projectionWeightApprox. 15.3kgAccessoryPower Code x 1, Code x 1

ItemsSpecificationsPower SupplyDC24V(Supplied from SY-961)InductanceApprox. 1.68[mH]±15% (between H-L)Max. Input Current30.0APerformance Guarantee Temp.+18ºC to +28ºCDimensions (mm)420(W) x 80(D) x 110(H)Excld. projectionWeightApprox. 14.0kgAccessoryJoint Fittings x 4ACB Cable L x 1ACB Cable S x 1DC Cable L Red/Black x 1eachDC Cable S Red/Black x 1each

Test example on chip inductor (Chopper excitation)

	Hint: In actual operation, both AC magnetic field and DC magnetic field may be applied at the same time usually. Magnetic property test with changing DC biasing level is considered important.

		ferrite L=1.0μH


		Fe-Based amorphous L=311μH


		iron powder L=8.4μH

DC-bias test system is uniquely used as an option for SY-8218 or SY-8219 and not be used with other equipment. Adjustment and inspection as a system with BH analyzer is requited.
BH analyzers(SY-8218/SY-8219) at the customer end will be returned to our factory for adjustment and inspection when DC-bias test system can be configured as a system.

产品简介

详细介绍

DC Bias Tester SY-960 Specifications

Test example on chip inductor (Chopper excitation)