品牌
代理商厂商性质
北京市所在地
德国耶拿氘灯
¥18000耶拿裂解管
¥19000荷兰AC注射器
¥2800硫氮仪注射器
¥1000博纯干燥管
¥30000干燥管 MD-110-48P-4
¥5000PE空心阴极灯N3050158/N3050139/N3050172/N3050173/N305010
面议PE空心阴极灯N3050144/N3050145/N3050134/N3050146/N305015
面议PE空心阴极灯N3050118/N3050121/N3050107/N3050126/N305015
面议PE空心阴极灯N3050105/N3050111/N3050115/N3050114/N305011
面议GC/MS自动进样针N6101390/N6103240/N6101380
面议PE空心阴极灯N3050170
面议英国PCS柴油润滑性仪器备件
Replacement Accessories
HFR Screw setStandard screw set
Part code:
HFRSS
HFR Gasoline Screw setGasoline screw set
Part code:
HFRGSS
HFR Tool setTool set
Part code:
HFRTOOL
HFRTSWPack containing - Tool Set, Screw set & Weight hanger cord
Part code:
HFRTSW
HFR Weight Hanger cordWeight Hanger cord
Part code:
HFRWHC
英国PCS柴油润滑性仪器备件
HFR Upper and Lower Speimen holders
Upper and Lower Specimen Holders
HFR Weight setWeight Set
Part code: HFRWT
Main Temperature ProbeMain Temperature Probe
Part code: HFRMRTD
HFR Push rod insertPush Rod Insert
Part code: HFRPRI
HFR Heater BlockHeater Block
Part code: HFRHB
HFR Alarm RTDAlarm RTD
Part code: HFRARTD
HeatersHeaters
Part code: HFRHEAT15
HFRR Humidity and Temperature probe including cable & bracket
Part code: HFRHYG
Overview
Important Information
Verification
Overview
HFRR Humidity and Temperature probe
HFRR Connecting Cable and Humidity/Temperature Probe
An optional combined humidity and temperature probe can be connected to the rear of the HFRR control unit. For some test procedures the wear scar must be adjusted to compensate for the effect of fuel moisture content on the result. The probe will automatically measure the ambient temperature and humidity at the start and end of the test, instead of the user having to make the measurements manually.
Supplied components
HFRR Humidity and Temperature probe
Probe connecting cable
Probe bracket (not required if using an HFRR Humidity Controlled Cabinet )
If the instrument is being used with a humidity controlled cabinet the probe should be located in the provided fitting on the left side of the cabinet. If the instrument is not being used with a humidity controlled cabinet, a bracket is supplied with the probe to enable the probe to be connected to the side of the mechanical unit.
HFRR Probe & Bracket
HFRR Probe & Bracket
The bracket supplied is fitted to the right hand side of the instrument (when viewed from the test chamber end) using the front cover screw as shown above.
The HFRR humidity and temperature probe can be purchased separay without cable and bracket. The part code for this item is HFRHUM.