瑞士CTC进样器各型号耗材

PAL & PAL-xt Parts List

Part no.Description

PAL-xt Instruments - HTC, HTS and HTX Configurations

PAL HTC-xt-DLWPAL HTC-xt including DLW Option PAL without TraySet or Stack*

Prep and Load System for High Throughput Screening consisting of:

1 pc  PAL50 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc  Power supply, Input Voltage 100-240V,120W,50/60Hz & cable 1 pc  Valve drive

1 pc  VICI C72VX-1676D-CTC-K Cheminert UPLC Valve Injection Valve

(Pressure up to 15'000 psi/1000 bar, 6 port, 0.25mm bore & sample loop 20μl) 1 DLW Wash Station (100 ul Syringe)

1 pc  Safety guard  

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

(*requires PAL TraySet or PAL Stack)

PAL HTS-xt-DLW

瑞士CTC进样器各型号耗材

 PAL HTS-xt including DLW Option PAL without TraySet or Stack* Prep and Load System for High Throughput Screening, consisting of:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable 1 pc  Valve drive

1 pc  VICI C72VX-1676D-CTC-K Cheminert UPLC Valve Injection Valve

(Pressure up to 15'000 psi/1000 bar, 6 port, 0.25mm bore & sample loop 20μl) 1 DLW Wash Station (100 ul Syringe)

1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

(*requires PAL TraySet or PAL Stack)

PAL HTC-xt-DLW-RPAL HTC-xt including DLW Option - without TraySet or Stack*

Prep and Load System for High Throughput Screening consisting of:

1 pc  PAL50 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc  Power supply, Input Voltage 100-240V,120W,50/60Hz & cable

1 pc  PAL VlvDrvR-32  Valve Drive for Rheodyne valve PD 718 series

1 pc PD 718-313 Rheodyne Injection Valve

(Pressure up to 17'500 psi / 1200 bar, 6 port, 0.20mm bore & sample loop 2μl 1 DLW Wash Station (100 ul Syringe)

1 pc  Safety guard  

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

(*requires PAL TraySet or PAL Stack)

PAL HTS-xt-DLW-R

 PAL HTS-xt including DLW Option PAL without TraySet or Stack* Prep and Load System for High Throughput Screening, consisting of:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable

1 pc  PAL VlvDrvR-32  Valve Drive for Rheodyne valve PD 718 series

1 pc PD 718-313 Rheodyne Injection Valve

(Pressure up to 17'500 psi / 1200 bar, 6 port, 0.20mm bore & sample loop 2μl 1 DLW Wash Station (100 ul Syringe)

1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

(*requires PAL TraySet or PAL Stack)

PAL HTC9-xtPAL HTC-xt without TraySet or Stack, valve drive, injection valve, fast wash station and syringe kit

Prep and Load System for High Throughput Screening, consisting of:

1 pc  PAL50 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit 

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc  Power supply, Input Voltage 100-240V, 120W,50/60Hz & cable 1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

PAL HTS9-xtPAL HTS-xt without TraySet or Stack, valve drive, injection valve, fast wash station and syringe kit

Prep and Load System for High Throughput Screening, consisting of:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc  Power supply, Input Voltage 100-240V,120W,50/60Hz & cable 1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

PAL HTX9-xtPAL HTX-xt without TraySet or Stack, valve drive, injection valve, fast wash station and syringe kit

Prep and Load System for High Throughput Screening, consisting of:

1 pc  PAL120 X/Y unit with XT Electronics and Firmware 4.X.X

1pc  HTS Injection unit 

2pc  Standalone support 215mm

1 pc  Control terminal & cable

1 pc  Power supply, Input Voltage 100-240V, 120W,50/60Hz & cable 1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

PAL DLW-2 Option

 Dynamic Load and Wash Option for fast and clean LC Cycles

1pc DLW-2 Injection Adapter with sample holding loop and syringe 100μl 1pc Wash Station

1pc Wash Solvent Pump Station with 2 active micro pumps

2 pc 1 Liter Wash Solvent bottles

2 pc Solvent bottle transfer line including solvent filter 1 pc System CD ROM DLW including Cycles requires but does not include xt-Upgrade for PAL and Firmware 4.X or higher Choose this kit if your PAL HTC/HTS is already equipped with the XT-Upgrade●●

PAL DLW-2-HTC-xt

 Dynamic Load and Wash Option including HTC-xt Upgrade Kit

1pc DLW-2 Injection Adapter with sample holding loop and syringe 100μl 1pc Wash Station

1pc Wash Solvent Pump Station with 2 active micro pumps

2 pc 1 Liter Wash Solvent bottles

2 pc Solvent bottle transfer line including solvent filter

1 pc System CD ROM DLW including Cycles

1 pc Kit HTC-xt (Control Board-xt for PAL System - Firmware 4.X or higher)

Choose this kit if you want to upgrade an existing HTC PAL to the DLW Option ●

PAL DLW-2-HTS-xt

 Dynamic Load and Wash Option including HTS-xt Upgrade Kit

1pc DLW-2 Injection Adapter with sample holding loop and syringe 100μl 1pc Wash Station

1pc Wash Solvent Pump Station with 2 active micro pumps

2 pc 1 Liter Wash Solvent bottles

2 pc Solvent bottle transfer line including solvent filter

1 pc System CD ROM DLW including Cycles

1 pc Kit HTS-xt (Control Board-xt for PAL System - Firmware 4.X or higher)

Choose this kit if you want to upgrade an existing HTS PAL to the DLW Option●

PAL TubeDLWDLW Tubing Kit HTS/HTC●●

SYRC DLW100-RCTC Syringe gastight DLW 100μl, removable needle, not included●●

PLG DLW100Replacement Plunger for SYRC DLW100-R, pk of 10 pcs●●

PAL DLW-2LoopPAL DLW-2 Loop incl. PEEK hex-head nut and lock nut for needle adapter●●

PAL TubeWasteTube Waste for Wash Station, length 2m●●

PAL DLW-2 UpgrdKitPAL DLW-2 Upgrade Kit, includes :

DLW-2 Syringe Holder Plate

DLW-2 Actuator Control PCB

DLW Needle Holder●●

HTX, HTS PAL, HTC PAL and LC PAL    Syringe Kits

PAL SyrLC10ulKit LC Syringe 10μl for HTX/HTS/HTC/LC PAL consisting of:

1pc   syringe adapter and 1pc plunger holder

2 pc  syringe SYRC G10-22S-3●●●

PAL SyrLC25ulKit LC Syringe 25μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder 

2pc  syringe SYRC G25-22S-3●●●

PAL SyrLCX25ulKit LC X-Syringe 25μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder 

2pc  syringe SYRX G25-22S-3●●●

PAL SyrLCX50ulKit LC X-Syringe 50μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder 

2pc  syringe SYRX G50-22S-3●●●

PAL SyrLC100ulKit LC Syringe 100μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder  

2pc  syringe SYRC G100-22S-3●●●

PAL SyrLCX100ulKit LC X-Syringe 100μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder  

2pc  syringe SYRX G100-22S-3●●●

PAL SyrLCX100ul-22Kit LC X-Syringe 100μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder  

2pc  syringe SYRX G100-22-3●●●

PAL SyrLC250ulKit LC Syringe 250μl for HTX/HTS/HTC/LC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder  

2pc  syringe SYRC G250-22-3●●●

PAL SyrLC500ulKit LC Syringe 500μl for HTX/HTS/HTC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder  

2pc  syringe SYRC G500-22-3●●

PAL SyrLC1000ulKit LC Syringe 1000μl for HTX/HTS/HTC PAL consisting of:

1pc  syringe adapter and 1pc plunger holder 

2pc  syringe SYRC G1000-22-3●●

PAL SyrLC2500ulKit LC Syringe 2500μl for HTX/HTS/HTC PAL consisting of:

1pc syringe adapter and 1pc plunger holder 

2pc syringe SYRC G2500-22-3●●

PAL SyrLC5000ulKit LC Syringe 5000μl for HTX/HTS/HTC PAL consisting of:

1pc syringe adapter and 1pc plunger holder 

2pc syringe SYRC G5000-22-3●●

HTX, HTS PAL, HTC PAL and LC PAL    Standard Syringes

SYRC G10-22S-3Liquid Syringe gastight 10μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S, Pointstyle 3 ●●●

SYRC G25-22S-3Liquid Syringe gastight 25μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S, Pointstyle 3 ●●●

SYRX G25-22S-3Liquid Syringe X-type gastight 25μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S,Pointstyle 3 ●●●

SYRX G50-22S-3Liquid Syringe X-type gastight 50μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S,Pointstyle 3 ●●●

SYRX G100-22-3Liquid Syringe X-type gastight 100μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22, Pointstyle 3 ●●●

SYRX G100-22S-3Liquid Syringe X-type gastight 100μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S,Pointstyle 3  ●●●

SYRC G100-22-3Liquid Syringe gastight 100μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22, Pointstyle 3 ●●●

SYRC G100-22S-3Liquid Syringe gastight 100μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22S,Pointstyle 3  ●●●

SYRC G250-22-3Liquid Syringe gastight 250μl for HTX/HTS/HTC/LC PAL Fixed needle, gauge 22, Pointstyle 3 ●●●

SYRC G500-22-3Liquid Syringe gastight 500μl for HTX/HTS/HTC PAL Fixed needle, gauge 22, Pointstyle 3 ●●

SYRC G1000-22-3Liquid Syringe gastight 1000μl for HTX/HTS/HTC PAL Fixed needle, gauge 22, Pointstyle 3 ●●

SYRC G2500-22-3Liquid Syringe gastight 2500μl for HTX/HTS/HTC PAL Fixed needle, gauge 22, Pointstyle 3 ●●

SYRC G5000-22-3Liquid Syringe gastight 5000μl for HTX/HTS/HTC PAL Fixed needle, gauge 22, Pointstyle 3 ●●

PLG G1010 pcs.  Replacement syringe plunger for syringe SYRC G10-22S-3●●●

PLG G2510 pcs.  Replacement syringe plunger for 25μl syringe●●●

PLG X253 pcs.    Replacement syringe plunger for SYRX G25 syringe●●●

PLG X503 pcs.    Replacement syringe plunger for SYRX G50 syringe●●●

PLG X1003 pcs.    Replacement syringe plunger for SYRX G100 syringe●●●

PLG G10010 pcs.  Replacement syringe plunger for 100μl syringe●●●

PLG G25010 pcs.  Replacement syringe plunger for 250μl syringe●●●

PLG G50010 pcs.  Replacement syringe plunger for 500μl syringe●●

PLG G1000-L1 pcs.    Replacement syringe plunger for 1000μl syringe ●●

PLG G25001 pcs.    Replacement syringe plunger for 2500μl syringe●●

PLG G50001 pcs.    Replacement syringe plunger for 5000μl syringe●●

?

Trays, Traysets, Tray Holders, Thermostatted Tray Holders and Stacks

PAL Tray1mlSample tray for 200 vials 0.7/1ml●●

PAL Tray2mlSample tray for 98 vials 2ml or 78 vials 0.7/1ml●●

PAL Tray20mlSample tray for 32 vials 10/20ml or 21 vials 2ml●●

PAL TrayMT2mlSample tray MT footprint, for 54x2ml vials for PAL Stacks all types or PAL MTHolders all types●●●

PAL TrayMT2ml/6Set of 6 pcs. PAL TrayMT2ml sample trays●●●

PAL TrayMT10ml/6Sample tray with Microtiter footprint for 15 vials 10ml, Pack of 6 pcs●●●

PAL Stack8MTPAL System stack for 8 Microtiter plates●●

PAL Stack12MTPAL System stack for 12 Microtiter plates●●

PAL Stack4DWPAL System stack for 4 micro- or deepwell plates●●

PAL Stack6DWPAL System stack for 6 Deepwell plates or 6 PAL TrayMT2ml●●

PAL MTHolderTray Holder 76mm for 2 Microtiter/Deepwell plates or 2 PAL TrayMT2ml●●

PAL MT4HolderTray Holder 76mm for 4 Microtiter/Deepwell plates or 4 PAL TrayMT2ml●●

MR 21-00Tray holder 76mm for standard vial trays 1ml, 2ml, 10ml vials●●

MR 22-00Tray holder 114mm for standard vial trays 10/20ml vials●●

PAL TraySet1mlSample tray for 200 vials 0.7/1ml, including Tray Holder 76mm●●

PAL TraySet2mlSample tray for 98 vials 2ml or 78 vials 0.7/1ml, including Tray Holder 76mm●●

PAL TrayCooler-xtPeltier Cooler 4°C to 70°C for one PAL Tray2ml (without sample tray) consisting of:

1pc TrayCooler with 84mm legs 1pc Tray cover for PAL Tray2ml including 1 pc. Power Supply 100V-240V LED Display, temperature regulation ± 1°C●●

PAL LiqCoolerLiquid Tray Cooler 4°C to 70°C*  for 1 PAL Tray2ml (without sample tray) consisting of:

1pc LiqCooler with 84mm legs

1pc plastic tray cover for PAL Tray2ml

(circulator connection tube OD 8mm) 

*excluding external heating/cooling circulator ●●

PAL LiqCooler2Liquid Tray Cooler 4°C to 70°C* consisting of: 

1 pc TrayCooler with 136mm legs

1 pc Cooling plate for 20ml vials

1 pc plastic tray cover for PAL Tray2ml

(* excluding PAL Tray2ml and external circulator)●●

MC 30-10Plastic Tray Cover to use 1 PAL Tray1ml in PAL TrayCooler or PAL LiqCooler●●

MC 30-11Plastic Tray Cover to use 1 PAL Tray2ml in PAL TrayCooler / PAL LiqCooler●●

MC 30-14Plastic Tray Cover to use 1 96well MT/DW in PAL TrayCooler/PAL LiqCooler●●

MC 50-01Adapter plate to use 1 96 well MT/DW in PAL TrayCooler / LiqCooler●●

MP 50-031Cooling plate 32x20 for PAL LiqCooler2 and PAL TrayCooler2●●

PAL StkCooler-xtPeltier cooled 6 DW Stack 4°C to 40°C for

  6 standard microplates or

  6 deepwell plates or   6 x 54 2ml vials

including LCD display, temperature regulation ±1°C and power supply 100V-240V●●

PAL StkCooler12MT-xtPeltier cooled 12MT Stack 4°C to 40°C for

12 standard microplates

including LCD display, temperature regulation ±1°C and power supply 100V-240V●●

PAL StkCooler2DW-xtPeltier cooled 2DW Stack 4°C to 40°C for

2 pcs  Standard Microplates or

2 pcs  Deepwell plates or 2 pcs  PAL TrayMT2ml including 1 pc Power Supply 100V-240V LED Display, temperature regulation ±1°C●●

HTX, HTS PAL and HTC PAL    Valve Drives

PAL 4VlvDrv-C2V6PAL 4-Valve Module, type 2 consisting of:

4 pcs.  Valve Drives 

4 pcs.  VICI Cheminert 6-port Injection valves, type C2V-1006D-CTC

4 pcs.  Sample loops 20μl 

1 pc     PEEK Solvent manifold

1 set    PEEK tubing kit including PEEK fittings

1 set    Electrical connection cables●●

PAL 4VlvDrvPAL 4-Valve Module, type 2 consisting of:

4 pcs.  Valve Drives 

1 pc     PEEK Solvent manifold

1 set    PEEK tubing kit including PEEK fittings

1 set    Electrical connection cables

(requires VICI Valco LC Valves, type DCxWK, type C or Rheodyne PD)●●

PAL ColSel6Column Switching Valve Module for up to 6 columns

2pc C5-1006 type 6-port Column Selector Valve 0.25mm bore

(requires Cycle Composer or PAL ICC-CE Software and PAL 1VlvDrv)●●

PAL 1VlvDrv-DPAL 1Valve Drive Module High Torque consisting of:

1 pc  Multiposition Valve Drive with bracket

1 set  Electrical connection cable

(requires LC Injection Valve, VICI type)●●

PAL 1VlvDrvPAL 1-Valve Drive Module consisting of:

1 pc  Multiposition Valve Drive with bracket

1 set  Electrical connection cable

(requires LC Injection Valve, VICI type)●●

PAL 2VlvDrvPAL 2-Valve Drive Module consisting of:

2 pcs Multiposition Valve Drives with bracket

1 set  Electrical connection cable

(requires LC Injection Valve, VICI type)●●

PAL 3VlvDrvPAL 3-Valve Drive Module consisting of:

3 pcs Multiposition Valve Drives with bracket

1 set  Electrical connection cable

(requires LC Injection Valve, all types)●●

PAL VlvDrvPAL Valve Drive for VICI LC valve type WK or C (without Valve)

1 pc   2 Position Valve Drives with bracket

1 set  Electrical connection cable

(requires LC Injection Valve, VICI type)●●

PAL VlvDrvRValve drive for PAL System for Rheodyne valve PD7921 and PD7991 (without valve), consisting of:

 1 pc  Valve drive module 

 1 pc  Connection cable 1300mm

(requires LC Injection Valve, Rheodyne type PD7921 / PD7991)●●

PAL VlvDrvR-32Valve drive for PAL System for Rheodyne valve PD718 series (without valve), consisting of:

1pc  Valve drive

1pc  Connection cable 1300mm

(requires LC Injection Valve, Rheodyne type PD 718 series)●●

HTX, HTS PAL and HTC PAL   Injection Valves,  Valve Adaptors

DC10WK-CTC-K10-Port VICI type WK Injection Valve 0.4mm bore  incl. Needle Guide, Needle Seal, Kit LCVlv ●●

DC6WK-CTC-K6-Port VICI type WK Injection Valve 0.4mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

DCI4WK.5/1-CTC-K4-Port VICI type WK Injection Valve 0.4mm bore, internal loop 0.5/1.0μl  incl. Needle Guide, Needle Seal, Kit LCVlv●●

C2V-0006D-CTC-K6-port VICI Cheminert Injection Valve 0.15mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

C2V-0346D-CTC-K6-port VICI Cheminert Injection Valve PAEK 0.15mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

C2V-1006D-CTC-K6-port VICI Cheminert Injection Valve 0.25mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

C2V-1346D-CTC-K6-port VICI Cheminert Injection Valve PAEK 0.25mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

C2V-3006D-CTC-K6-Port Cheminert Injection Valve 0.75mm bore (prep version)   incl. Needle Guide gauge 19, Needle Seal gauge 19, Kit LCVlv●●

C2VH-1000D-CTC-K10-port VICI Cheminert Injection Valve 0.25mm bore incl. Needle Guide, Needle Seal, Kit LCVlv●●

CN2-4340D-CTC10-port VICI Cheminert Switching Valve PAEK version 0.1mm bore

1/32" Connections, no vertical port, can not be used as injection valve●●

C5F-1004D-CTC8-port VICI Selector Valve 0.25mm bore

(requires Valve Drive MV 03-01)●●

C72VU-6676D-CTC-K6 port VICI injection valve Cheminert

Pressure up to 18'500 psi / 1275 bar

50°C liq. / ID 0.15 mm incl. 2μl and 20μl loop. 20μl loop already mounted.●●

C72VX-1676D-CTC-K6-port VICI Cheminert Injection Valve, 0.25mm bore Pressure up to 15'000 psi / 1000 bar incl. Needle Guide, Needle Seal, Kit LCVlv●●

C72VX-1670D-CTC-K10-port VICI Cheminert Injection Valve, 0.25mm bore Pressure up to 15'000 psi / 1000 bar incl. Needle Guide, Needle Seal, Kit LCVlv (requires PAL 1VlvDrv-D high torque version)●●

C72X-6670D-CTC10-port VICI Cheminert Valve

15'000 psi  75°C

ID 0.15 mm (requires PAL 1VlvDrv-D High Torque Version)●●

C2-AdptrAdaptor to mount C2V valve on PAL VlvDrv old style (MV 10-00)●●●

MV 36-01Valve-Adapter for VICI Valco valves●●

Kit LCVlvKit Waste-Tubing for Valve●●

PD7991-K6-port Rheodyne Injection Valve 0.20mm bore

SPC4 (Special plating on Titanium, biocompatible) Pressure up to 15'000 psi / 1000 bar incl. Needle Guide, Needle Seal, Kit LCVlv●●

SS-100 Set-10SWAGELOK ferrule 1/16" SST, pack of 10 Front and Back Ferrule (required for PD 7991-K fluid connections)●●

PD718-313-K6 port Rheodyne Injection Valve 0.20mm bore

Coated, stainless steel rotor seal (RPC-13)

Pressure up to 17'500 psi / 1200 bar, incl. Needle Guide, Needle Seal, Kit LCVlvR, mounted 2ul loop and VHP-200 fittings

(requires PAL VlvDrvR-32)●●

PD718-315-K6 port Rheodyne Injection Valve 0.20mm bore and MBB

Coated, stainless steel rotor seal (RPC-13)

Pressure up to 17'500 psi / 1200 bar, incl. Needle Guide, Needle Seal, Kit LCVlvR, (requires PAL VlvDrvR-32)●●

HTX, HTS PAL, HTC PAL and LC PAL    Stators, Rotors, Sample Loops

SL1KCWSample loop 1000μl for VICI, type WK 

 ●●

SL500CWSample loop 500μl for VICI, type WK●●

SL250CWSample loop 250μl for VICI, type WK●●

SL200CWSample loop 200μl for VICI, type WK●●

SL100CWSample loop 100μl for VICI, type WK●●

SL50CWSample loop 50μl for VICI, type WK●●

SL20CWSample loop 20μl for VICI, type WK●●

CSL5KSample loop 5000μl for Cheminert Injection valve●●

CSL2KSample loop 2000μl for Cheminert Injection valve●●

CSL1KSample loop 1000μl for Cheminert Injection valve●●

CSL500Sample loop 500μl for Cheminert Injection valve●●

CSL250Sample loop 250μl for Cheminert Injection valve●●●

CSL100Sample loop 100μl for Cheminert Injection valve●●●

CSL50Sample loop 50μl for Cheminert Injection valve●●●

CSL20-CTCSample loop 20μl for Cheminert Injection valve●●●

CSL10-CTCSample loop 10μl for Cheminert Injection valve●●●

CSL5-CTCSample loop 5μl for Cheminert Injection valve●●●

CSL2-CTCSample loop 2μl for Cheminert Injection valve●●●

CZSL20PKSample loop PEEK 20μl for Cheminert Injection valve●●●

CZSL10PKSample loop PEEK 10μl for Cheminert Injection valve●●●

CZSL5PKSample loop PEEK 5μl for Cheminert Injection valve●●●

CZSL2PKSample loop PEEK 2μl for Cheminert Injection valve●●●

TR050306BSample Loop 5ul Stainless Steel for Rheodyne type PD 7991●●

TR050306CSample Loop 10ul Stainless Steel for Rheodyne type PD 7991●●

TR050306DSample Loop 20ul Stainless Steel for Rheodyne type PD 7991●●

TR050306ESample Loop 50ul Stainless Steel for Rheodyne type PD 7991●●

TR050306FSample Loop 100ul Stainless Steel for Rheodyne type PD 7991●●

PD718SL2Rheodyne Sample loop 2ul for PD 718-313 and PD718-315  type valves●●

PD718SL10Rheodyne Sample loop 10ul for PD 718-313 and PD718-315  type valves●●

PD718SL20Rheodyne Sample loop 20ul for PD 718-313 and PD718-315  type valves●●

PAL NdlSealP10pcs. PEEK Needle seal, gauge 22 for Valco PEAK valve●●●

PAL NdlSealP-1910pcs  PEEK Needle seal , gauge 19 for Valco PEAK valve●●●

PAL NdlSeal10pcs. Needle seal, gauge 22 for Valco valve●●●

PAL NdlSeal-1910pcs. Needle seal, gauge 19 for Valco valve●●

PAL NdlSealR10pcs. Needle seal, gauge 22 for Rheodyne valves●●

C2-00R6Rotor for C2V-0006D-CTC and C2-0006D-CTC●●

C2V-0C06Stator for C2V-0006D-CTC●●

C2-13R0HRotor for C2VH-1340D-CTC ●●

C2V-1C40HStator for C2VH-1340D-CTC●●

C2-10R0HRotor for C2VH-1000D-CTC●●

C2V-1C00HStator for C2VH-1000D-CTC●●

C2-03R6Rotor for C2V-0346D-CTC●●

C2V-0C46Stator for C2V-0346D-CTC●●

C72-16R6Rotor for C72VX-1676D-CTC and C72VX-1696D-CTC●●

C72V-1C76Stator for C72VX-1676D-CTC●●

C72V-1C96Stator for C72VX-1696D-CTC●●

C72-16R0Rotor for C72VX-1670D-CTC and C72VX-1690D-CTC●●

C72V-1C70Stator for C72VX-1670D-CTC●●

C72V-1C90Stator for C72VX-1690D-CTC●●

C2-13R6Rotor for C2V-1346D-CTC●●

C2V-1C46Stator for C2V-1346D-CTC●●

C2-30R6Rotor Valcon-H for C2V-3006D-CTC●●

C2V-3C06Stator C2V-3006D-CTC●●

C2-03R6Rotor for C2-0346D-CTC●●

C-0C46Stator for C2-0346D-CTC●●

C2-10R6Rotor for C2V-1006D-CTC●●●

C2V-1C06Stator for C2V-1006D-CTC●●●

C2-20R6Rotor for C2V-2006D-CTC●●●

C2V-2C06Stator for C2V-2006D-CTC●●●

C2-23R6Rotor for C2V-2346D-CTC●●●

C2V-2C46Stator for C2V-2346D-CTC●●●

C72-66R6Rotor for C72VX-6696D-CTC, C72VU-6696D-CTC and for C72VU-6676D-CTC●●

C72V-6C76Stator for C72VU-6676D-CTC●●

C5F-10R4Rotor for PAL SelVlv C5 Selector Valve●●

C5-1C28Stator for PAL SelVlv C5 Selector Valve●●

SSACI4W.5/1Rotor for DCI4WK.5/1-CTC, internal loop 0.5/1μl ●●

SSAC6WRotor for DC6WK-CTC●●

SSAC10WRotor for DC10WK-CTC●●

7991-999RheBuild Kit Rotor for PD 7991●●

7990-005Stator for PD 7991●●

PD718-RPC13-6Rotor for PD718-313 Rheodyne 1200 Bar Valve●●

PD718-SPC3Stator for PD718-313 Rheodyne 1200 Bar Valve●●

PD718-315-RPCRotor for PD718-315 Rheodyne 1200 Bar MBB Valve●●

PD718-315-SPC3Stator for PD718-315 Rheodyne 1200 Bar MBB Valve●●

HTX, HTS PAL, HTC PAL    Dilutor Option

PAL DilutorPAL Dilutor Option for HTS PAL or COMBI PAL, consisting of:

 1 pc  Dilutor module

 1 pc  Connection cable

 1 pc  Dilutor syringe 2.5ml

 1 pc  Transfer tube 1/16"

 1 pc  Solvent bottle 1000ml

 1 pc  Aspirating tube 1/8"

(requires PAL SyrLCSP80μl, PAL SyrLCSP20μl●

PALDilutor-HTXPAL Dilutor Option for HTX PAL, consisting of:

 1 pc  Dilutor module

 1 pc  Connection cable

 1 pc  Dilutor syringe 2.5ml

 1 pc  Transfer tube 1/16"

 1 pc  Solvent bottle 1000ml

 1 pc  Aspirating tube 1/8"

(requires PAL SyrLCSP80μl, PAL SyrLCSP20μl

PAL SyrLCSP80ulKit Dilutor Syringe 80μl for HTS PAL consisting of: 1pc   Sideport Syringe Plunger Sealing Screw

1pc   Sideport Syringe Adapter and Plunger Holder

1pc   Sideport Syringe 80μl SYRC SP80-R

3pcs Ndl S-22-3 Needles gauge 22 pointstyle 3 for Sideport Syringe●

PAL SyrLCSP20ulKit Dilutor Syringe 20μl for HTS PAL consisting of: 1pc   Sideport Syringe Plunger Sealing Screw

1pc   Sideport Syringe Adapter and Plunger Holder

1pc   Sideport Syringe 20μl SYRC SP80-R

3pcs Ndl S-22S-3 Needles gauge 22S pst 3 for Sideport Syringe●

SYRC DIL1.0PAL Dilutor Syringe 1ml●

SYRC DIL2.5PAL Dilutor Syringe 2.5ml●

SYRC DIL5.0PAL Dilutor Syringe 5ml●

SYRC DIL10PAL Dilutor Syringe 10ml●

SYRC SP80-RSideport Syringe 80μl gastight without needle●

SYRC SP20-RSideport Syringe 20μl gastight without needle●

PLG DIL1.0Replacement Dilutor Syringe Plunger 1ml●

PLG DIL2.5Replacement Dilutor Syringe Plunger 2.5ml●

PLG DIL5Replacement Dilutor Syringe Plunger 5.0ml●

PLG DIL10Replacement Dilutor Syringe Plunger 10ml●

PLG SP8010pcs Replacement syringe plunger for 80μl Sideport Syringe●

PLG SP2010pcs Replacement syringe plunger for 20μl Sideport Syringe●

Ndl S-22-33pcs Replacement needle gauge 22 pst 3 for Sideport Syringe 80μl●

Ndl S-22S-33pcs Replacement needle gauge 22S pst 3 for Sideport Syringe 20μl●

PAL SyrOringSP201pc Perfluor O-Ring for SYRC SP20-R●

PAL SyrOringSP801pc Perfluor O-Ring for SYRC SP80-R●

PAL TubeDilHTX1pc PAL Dilutor Transfer Tubing Kit for 120cm X-axis●

PAL TubeDilutor(B)1pc PAL Dilutor Transfer Tubing Kit for 50cm or 80cm X-axis●

PAL DilAspKitAspiration tube kit, PFA tube and glass filter 40μl pore size●

1000-SV1pc Dilutor Solvent bottle 1000ml●

MM 30-361pc Dilutor Syringe Screw●

PAL DilWasher10pcs PTFE Dilutor Syringe Washer●

MM 90-023-way Dilutor Valve, PCTFE●

MM 90-033-way Dilutor Valve, PTFE●

HTS PAL, HTC PAL    MALDI Option

PAL MALDIOptPAL MALDI Option - Fraction Collection system consisting of:

1pc   Tool parking bracket

1pc   MALDI spotting tool

3pcs. Spotting tips

1pc   Tool holder

1pc   Waste tube

1pc   Microfluidic fitting and tubing accessories

1pc   CD-ROM PAL firmware 3.0 and CycleComposer cycles

(requires PAL firmware 3.0 or higher and Cycle Composer or preferably PAL-xt System  and Firmware 4.1.X or higher)●●

MSpoTip33 pcs. Coated Fused Silica Spotting Tips, 360μm OD, 20μm ID●●

MP 52-01MALDI Target Adapter for 2pcs. Waters 96/384 Targets●●

MP 52-02MALDI Target Adapter for 2pcs. ABI Opti-TOF or ABI 4700 / Voyager●●

MP 52-04MALDI Target Adapter for 1pc Bruker AnChor Chip●●

MP 52-05MALDI Target Adapter for 1pc ABI 4800 Target●●

HTX, HTS PAL, HTC PAL and LC PAL    Software

PAL CycCompCDCycle Composer Remote Control Software for PAL System CD ROM consisting of:

Cycle Composer standalone version

(Requires PAL Firmware 2.2 or higher and Windows XP/ VISTA)●●●

PAL CycCompCD5Cycle Composer Remote Control Software for PAL System CD ROM, site license for 5 instruments consisting of:

Cycle Composer standalone version including 5 serial numbers

(Requires PAL Firmware 2.2 or higher and Windows XP/ VISTA)●●●

PAL CCUpgrdCycle Composer Remote Control Software for PAL System

CD Upgrade Version 1.6 (requires Cycle Composer license number)●●●

PAL CycEditPAL Cycle Editor License●●●

PAL ICC-CECTC Instrument Control Components incl. Cycle Editor ●●●

PAL DrvEmpPAL Driver License for Waters Empower2 Software●●●

PAL DrvEmp3PAL Driver License for Waters Empower3 Software●●●

?

HTX, HTS PAL, HTC PAL and LC PAL    Accessories

PAL LC-QDocInstrument Qualification for HTS/HTC and LC PAL consisting of:

1pc   LogBook

1pc   Documentation IQ procedure 

1pc   Documentation OQ procedure●●●

PAL LC-ReQInstrument Requalification for HTS/HTC and LC PAL consisting of: 1pc   Documentation OQ procedure●●●

PAL WashFast-22Wash station HTS PAL for two solvents consisting of:

1 pc  Double wash station incl. Holder for 2 x 500ml bottles

1 pc  Electrical Connection cable

1pc  Tubing Kit

2pc  Solvent bottles 500ml●

PAL WashFast3-22Wash station HTC PAL for two solvents consisting of:

1 pc  Double wash station incl. Holder for 2 x 500ml bottles

1 pc  Electrical Connection cable

1pc  Tubing Kit

2pc  Solvent bottles 500ml●

Kit FWash10001000ml Solvent Kit consisting of:

1pc    Bottle Holder bracket incl. screws

2pcs. 1000ml Solvent Bottles●●●

PAL WashLargeLC PAL Wash station for two solvents, consisting of:

1pc   Vial holder for 2 x 100ml vials

2pcs  Vial 100ml, including Caps and Seals

1 pcs  Waste port including septa, cap waste tubing●●●

PAL 3xSolv100Solvent Reservoir consisting of:

1 pc Holder for 3pc 100ml vials

3 pcs Solvent vials 100ml including caps and seals●●

PAL FlowCell Flow-Through Cell for PAL System, new design to accommodate up to 6 flow cells, consisting of* :

1 pc  Holder 88mm

1 pc  Flow-Cell Stainless Steel 316 with connectors Swagelok 1/4"

(*required external pump and transfer tubing not included)●●

MM 06-00Single Flow-Cell for PAL System, consisting of:

1 pc  Flow-Cell Stainless Steel 316 with connectors Swagelok 1/4"

1 pc  Septa

(requires PAL FlowCell)●●

PAL OutExpBoxOutput Expansion Box for HTS PAL or COMBI PAL System 8 x Relay Contact / 8 x 24V (P tot = 12W) consisting of:

1 pc Output Expansion Box

1 pc Cable DSub25M/F

1 pc Cable Power 36V

(requires PAL Firmware 2.4 or higher)●

PAL BCReaderBarcode Reader

Laser scanner for barcode labels on 2ml/10ml/20ml vials with magnetic caps including adapter and connection cables (PAL and PAL-xt Systems)●●

PAL BCAdapterBarcode Adapter for PAL-xt System including cable - only required when upgrading existing PAL to PAL-xt System

(Requires PAL firmware version 4.1.2 or higher)●●

USB-Ser2USB to 2 RS232 Converter (connects PAL SER ports to USB port)●●●

MSZ 02-01Microtiter Plate Foil Cutter for needles Gauge 22 max.●●●

PAL TwinKit1-xtMounting kit  for two PAL-xt cross rails●

PAL TwinSafetyGuardSafety Guard for PAL Twin Kit with 126 mm displacement●

PAL XExtL-xtPAL-xt X-Axis Extension Left hand side, 126mm●

PAL XExtR-xtPAL-xt X-Axis Extension Right hand side, 126mm●

PAL ToolkitTool Kit for PAL System●●●

HTX, HTS PAL, HTC PAL and LC PAL    Spare Parts

PAL PMKit1 Preventative Maintenance (PM) Kit for PAL HPLC Technique 

 ●●●

PAL MR-Std-xtStandard Support Leg PAL-xt, 215mm, 2pcs●●

PAL LubKitPAL Lubrication Kit●●●

PAL PaintCTCPaint for PAL System 20ml including brush (white)●●●

MSB6.3AT/10Fuse 6.3AT for PAL CPU and Control Boards, pkg of 10pcs●●●

SFC 4/10SupraFuse 4A for PAL CPU and Control Boards, pkg of 10pcs●●●

BAT VL2330Backup Battery for PAL CPU/Control Board (1pc)●●●

Kit HTS-xt 

 Upgrade Kit for HTS PAL to PAL HTX-xt, incl. 

1 pc Control Board-xt for PAL System - Firmware 4.X.X, back cover, cables, CD ●

Kit HTC-xt 

 Upgrade Kit for HTC PAL to PAL HTC-xt, incl.

1 pc Control Board-xt for PAL System - Firmware 4.X.X, back cover, cables, CD  ●

APR Control-xtControl Board for all PAL Models●●●

APR Control-HTCControl Board for HTC PAL (non-xt)●

APR Control-LCControl Board for LC PAL (non-xt)●

APR CPUCPU Board for PAL System (non-xt)●

APR MOTIOMotor Driver and Input/Output Processing Board for PAL System (non-xt)●

MN 01-02Power supply for PAL-xt System

Power 150 Watt, Input Voltage 100V-240V●●

MN 03-02Power supply for PAL StkCooler-xt and PAL TrayCooler-xt, all types Input Voltage 100V-240V (specify Cooler type)●●

Cbl RS20R-760Cable 20p shielded, MiniRibbon connectors, 760mm long 

(Connection cable of COMBI PAL incubation heater , dilutor or valve drive)●●●

Cbl RS20R-1300Cable 20p shielded, MiniRibbon connectors, 1300mm long

(Connection cable of COMBI PAL incubation heater , dilutor or valve drive)●●●

Cbl RS2MR-2500Power Cable for MultiposVlvDrv MV 03-01 ●

Cbl RS3JR-850Signal Cable for MultiposVlvDrv MV 03-01, 850mm●

Cbl RS3JR-1200Signal Cable for MultiposVlvDrv MV 03-01, 1200mm●

Cbl RS14R-250Daisy chain Cable 14p shielded, MiniRibbon connectors, 250mm long (connection of MultiposVlvDrv MV 03-01)●

Cbl RS14R-850Cable 14p shielded, MiniRibbon connectors, 850mm long (Connection of MultiposVlvDrv Type 2)●

Cbl RS3M-2000Power cable 2m for PAL all types 

(Connection between PAL power supply and PAL)●●●

Cbl RS4EX-1300Cable for dual Fast Wash Station HTX PAL ●

Cbl RS4EX-800Cable for dual Fast Wash Station HTS PAL ●

Cbl R4LX-700Cable for dual Fast Wash Station HTC PAL and LC PAL ●●

Cbl R4LX-1300Cable for PAL-xt Wash Station, Round Connector (Length: 1300 mm)●●

Cbl RS4C0-3000PAL Interface cable 3m long 15 pin connector - open wires●●●

Cbl RS9B-3000Cable RS-232 with connector DB9 3m long (Connection PAL - PC)●●●

Cbl RS9B-6000Cable RS-232 with connector DB9 6m long (Connection PAL - PC)●●●

Cbl SS8J-700Cable 8p shielded, RJ45 connectors, 700mm long, LCD Terminal●●●

PAL CblSerPrtrCable and adapter to connect a PAL System to a serial printer with DB 25 connector (requires Printer with serial interface)●●●

PAL 3Ferrule1pc Flangeless Trio Ferrule PTFE 3 x 1/16" for ActiveWashStation●●●

PAL AWOringPerfluor O-Ring for ActiveWashStation (set of 2 pcs)●●●

PAL TubeWasteActWaste Tube for Active Wash, 2m●●●

CV-33151pc 174-28 Waste Check Valve 0.2bar, for ActiveWashStation●●●

PAL TubeWashActTubing Kit for Active WashStation with 1 Injection Valve●●●

MM 012-01PTFE solvent overflow collector incl. ActiveWash Station needle guide ●●●

MM 91-011pc PTFE Solenoid Micropump, for ActiveWashStation●●●

MB 20-00Holder Assembly for PAL Control Terminal●●●

PAL TermCTCControl terminal for PAL system all types●●●

PAL TermCTC-xtControl terminal for PAL-xt system all types●●●

Kit LCD ReplReplacement Kit for PAL Control Terminal, incl. LCD-Module, flat cable, screws●●●

MM 01-01Fast wash module for two solvents, without holder and cable●●●

MM 11-00Fast wash module valve assembly●●●

MM 30-21Glas tube for fast wash station, gauge 22, ID 0.8mm, length 57mm●●●

MM 30-19Viewing glass OD 20mm for Fast wash module●●●

PAL ORingFWSO-ring Perfluor white, kit of 4pcs. Fast wash module●●●

PAL TubeWasteWaste Tube for Fast Wash Station, 2m●●●

PAL TubeFWash1 pc Connection tube incl. fittings and shutoff valve between 

Wash solvent bottle and Fast wash station module HTS/HTC/LC PAL●●●

PAL TubeFWash11 pc PFA tube including fittings between 

Solvent bottle shutoff valve and Fast wash valve assembly●●●

1000-WV1000ml Wash solvent bottle for PAL Fast Wash Station●●●

500-WV500ml Wash solvent bottle for PAL Fast Wash Station●●●

100-WV100ml Solvent bottle for LC PAL Wash Station  PAL WashLarge or

PAL 3xSolv100 Solvent Reservoir, including cap and seal●●●

Kit SealCap10 caps and 10 seals for 100-WV Solvent bottle●●●

CV-33451pc Check valve for MUX Kit●

PAL StkDrwMagStack Drawer Magnet Assembly, Kit●●

Kit StkRollsSSt12pcs rolls stainless steel incl. screws for stack drawer●●

Kit DrawFront12MTKit, Drawer Fronts 31mm for Stack Cooler 12MT, consisting of:

6 pcs  Drawer Front Covers with connecting plate mounted 1 pc    Kit CStkScrews ●●

Kit DrawFront2DWKit, Drawer Fronts 63mm for Stack Cooler 2DW, consisting of:

1 pc  Drawer Front Cover with connecting plate mounted 1 pc  Kit CStkScrews ●●

Kit DrawFront6DWKit, Drawer Fronts 63mm for Stack Cooler 6DW, consisting of:

3 pcs.  Drawer Front Covers with connecting plate mounted 1 pc.    Kit CStkScrews ●●

Kit CStkScrewsKit of replacement Nylon screws for PAL StkCooler front cover all types ●●

PAL UprNdlGdeUpper Needle Guide Assembly (Gauge 19)●●

PAL UprNdlGde108Upper Needle Guide Assembly 108mm (Gauge 19)●●

MZ 23-01Needle Guide Replacement Kit for HTS/HTC/LC PAL●●●

MZ 20-45Lower Needle Guide with chemical resistant coating. Without transport magnets installed, hole size for needles Gauge 19●●●

MZ 20-46Upper Needle Guide with chemical resistant coating Hole size for Gauge 19 needles●●●

MV 30-16PEEK Needle guide for valve type C PAEK versions●●●

MV 30-12Needle guide gauge 22, stainless steel for VICI type C or type WK●●●

MV 30-52Needle guide gauge 19, stainless steel for VICI type C or type WK●●●

MZ 32-00Safety Shield for PAL Injection Unit●●●

MX 32-00Plexiglas Safety Guard for PAL80●

MX 33-00Plexiglas Safety Guard for PAL50●●

MX 36-00Plexiglas Safety Guard for PAL120

MX 37-00Screw Kit for Safety Guard all types●●●

PAL TCord280Tension Cord 280mm (set of 5 pcs)●●●

PAL TCord90Tension Cord 90-95mm (set of 5 pcs)●●●

MZ 06-00Injection unit for GC1 PAL or LC PAL ●

MZ 01-00Injection unit for HTX, HTS PAL or HTC PAL with needle guide Gauge 19●●

MZ 017-00Injection unit for HTX, HTS or  HTC PAL-xt  with needle guide Gauge 19●●

PAL FlexBandKitPAL Flexband for standard PAL50/80 Models, 1pc●●●

PAL FlexBandKit2PAL Flexband for PAL Models 120cm length, single Z-Axis installed, 1pc

MX 20-15Metal Angle Bracket for Ribbon Cable●●●

PAL XYSensX-Y-Axis Position Sensor PCB's, Kit●●●

PAL XYSensDualX-Y-Axis Position Sensor PCB's, Dual Kit for Dual Injection Unit PAL Models

MX 52-00Grounding Conductor for X/Y Carriage●●●

PAL MZCovTopTop Cover for Z-Axis, Kit●●●

PAL SlidStopKitSlider Stopper Assembly ( Z-Axis )●●●

PAL RCbl50Ribbon Cable Kit for X-Axis 50cm●●

PAL RCbl80Ribbon Cable Kit for X-Axis 80cm●

PAL RCbl120Ribbon Cable Kit for PAL X-Axis 120cm, for Single Injection Unit PAL Models

PAL RCblDualRibbon Cable Kit for PAL X-Axis 120cm, for Dual Injection Unit PAL Models

MZ 50-00Ribbon Cable Z-Axis, 500mm●●●

MZ 51-00Ribbon Cable Z-Axis, 450mm●●●

PAL MZCovCtrlCover for Control Module Z-Axis, Kit●●●

PAL MZCovCblCover for Motors and Ribbon Cable Z-Axis, Kit, (Rev. B or higher)●●●

MZ 20-11Lower Needle Guide Gauge22, transport magnets installed●●●

MZ 20-14Mechanical Stop for Needle Guide●●●

MZ 20-15Adapter for Short Tension Cord ( Z-Axis )●●●

PAL MZCtrlPCB Assembly for PAL Injection Unit, Kit, (Rev. D or higher)●●●

PAL NdlBlkMagSolenoid for Needle Guide Blocking Assembly, Kit●●●

PAL MotPlgPAL Stepper Motor Plunger, Kit, (For Injection Rev.B or higher only)●●●

PAL MotZPAL Stepper Motor Z-Axis, Kit●●●

PAL MZTRack350Toothed Rack, 350mm, Kit●●

PAL MZTRack300Toothed Rack, 300mm, Kit●

PAL MZZMagSwitching Magnet for Z-Sensor, Kit●●●

BN4851 M4x25Screws for X-Axis Side Covers, 10pcs●●●

BN4851 M3x20Screws for Y-Axis Side Covers, 10pcs●●●

Part no.Description

PAL-xt Instruments -  COMBI, LHX and GC Configurations

PAL LHS0-xtPAL COMBI-xt for Liquid Injection, without Headspace option, Trayset consisting of*:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X

1 pc COMBI  Injection unit

1 pc Control terminal & cable

1 pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable

1 pc Wash station for 2 solvents and 1standard liquid

1 pc Kit SealCap

1pc Syringe adapter 10μl & plunger holder

2pc Syringe 10 μl SYRC L10-26S-AS 

1pc Safety guard

2pc PC connection cable (1 Serial, 1 Ethernet)

1 pc PAL System CD

(*requires PAL Trayset and GC mounting kit)

PAL LHS2-xtPAL COMBI-xt for Liquid and Headspace Injection, with 2ml and 10/20ml vial tray, consisting of*:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X

1 pc COMBI  Injection unit

1 pc Control terminal & cable

1 pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable

1 pc Incubator for vials 2/10/20ml,shaker,temperature up to 200° C

1 pc Pressure regulator including connection fittings

1 pc Wash station for 2 solvents and 1standard liquid

1pc Kit SealCap

2pc Sample tray holder 114 mm

1 pc Sample tray 98x2ml/78x1ml

1 pc Sample tray 32x10/20ml

1pc Syringe adapter 10μl & plunger holder

2pc Syringe 10μl SYRC L10-26S-AS 

1pc Syringe heater 2.5ml, temperature up to 150°C

2pc Headspace Syringes 2.5ml SYRC HS2.5-23-5 

1pc Safety guard

2pc PC connection cable (1 Serial, 1 Ethernet)

1 pc PAL System CD

(*requires GC mounting kit)

PAL LHX9-xtPAL COMBI-xt without Liquid Injection option, Headspace option, Vial Tray,  Tray Holder or Wash Station, consisting of*:

1 pc  PAL120 X/Y unit with XT Electronics and Firmware 4.X.X

1 pc  COMBI  Injection unit 

1 pc  Control terminal & cable

1 pc   External HS flush gas tubing kit

1 pc  Power supply, Input Voltage 100-240V, 120W,50/60Hz & cable 1 pc  Safety guard

1pc  PAL Interface Cable 3m 

2pc  PC connection cable (1 Serial, 1 Ethernet)

1 pc  PAL System CD

(*requires PAL Trayset, Syringe Kit and GC mounting kit)

PAL GC1-xtPAL GC-xt for Liquid Injection only 

(no upgrade possibility to LHS models) consisting of*:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X 1 pc GC Injection unit

1 pc Control terminal & cable

1 pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable

1 pc Wash station for 2 solvents and 1standard liquid

1 pc Kit SealCap

1 pc Sample tray holder 76mm

1 pc Sample tray 98x2ml/78x1ml

1pc Syringe adapter 10μl & plunger holder

2pc Syringe 10 μl SYRC L10-26S-AS 

1pc Safety guard

2pc PC connection cable (1 Serial, 1 Ethernet)

1 pc PAL System CD

(*requires GC mounting kit)

PAL GC9-xtPAL GC-xt for Liquid Injection only, without Washstation, Trayset and Syringe Kit (no upgrade possibility to LHS models) consisting of*:

1 pc  PAL80 X/Y unit with XT Electronics and Firmware 4.X.X 1 pc GC Injection unit

1 pc Control terminal & cable

1pc Power supply, Input Voltage 100-240V,120W,50/60Hz & cable1 pc Safety guard

2pc PC connection cable (1 Serial, 1 Ethernet)

1 pc PAL System CD

(*requires GC mounting kit)

Part no.PAL Instruments Options, Accessories and Spare Parts for                

GC/Combi PAL Systems  

LHX, COMBI PAL and GC PAL    Syringe Kits

PAL SyrGC1.2ulKit GC Syringe 1.2μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder

2pc  Syringe SYRC L1.2-26P-AS (plunger in needle design)●●

PAL SyrGC5ulKit GC Syringe 5μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder 

2pc Syringe SYRC L5-26S-AS●●

PAL SyrGC10ulKit GC Syringe 10μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder

2pc  Syringe SYRC L10-26S-AS●●

PAL SyrGC10ul-GKit GC Syringe 10μl gastight for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder

2pc  Syringe SYRC G10-26S-AS●●

PAL SyrGC25ulKit GC Syringe 25μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder 

2pc Syringe SYRC G25-26S-AS●●

PAL SyrGC100ulKit GC Syringe 100μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder 

2pc  Syringe SYRC G100-26S-AS●●

PAL SyrGC250ulKit GC Syringe 250μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder

2pc  Syringe SYRC G250-26-AS●●

PAL SyrGC500ulKit GC Syringe 500μl for COMBI PAL and GC1 PAL consisting of:

1pc  syringe adapter and 1 pc plunger holder

2pc  Syringe SYRC G500-26-AS●●

PAL SyrHS1.0mlKit HS Syringe 1.0ml for COMBI PAL consisting of:

1pc  syringe heater and 1 pc plunger holder

2pc  Syringe SYRC HS1.0-23-5●

PAL SyrHS2.5mlKit HS Syringe 2.5ml for COMBI PAL consisting of:

1pc  syringe heater and 1 pc plunger holder

2pc  Syringe SYRC HS2.5-23-5●

PAL SyrHS5.0mlKit HS Syringe 5.0ml for COMBI PAL consisting of:

1pc  syringe heater and 1 pc plunger holder

2pc  Syringe SYRC HS5.0-23-5●

LHX, COMBI PAL and GC PAL    Standard Syringes

SYRC HS1.0-23-5Headspace Syringe HD-type 1.0ml for COMBI  PAL

Sideport for gas flushing, fixed needle gauge 23, Pointstyle 5 ●

SYRC HS2.5-23-5Headspace Syringe HD-type 2.5ml for COMBI  PAL

Sideport for gas flushing, fixed needle gauge 23, Pointstyle 5 ●

SYRC HS5.0-23-5Headspace Syringe HD-type 5.0ml for COMBI  PAL

Sideport for gas flushing, fixed needle gauge 23, Pointstyle 5 ●

SYRC L1.2-26P-ASLiquid syringe 1.2μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26P, Pointstyle AS ●●

SYRC L5-26S-ASLiquid syringe 5μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S, Pointstyle AS ●●

SYRC L10-26S-ASLiquid syringe 10μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S, Pointstyle AS ●●

SYRC G10-26S-ASLiquid syringe gastight 10μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S, Pointstyle AS ●●

SYRC L10-26S-2Liquid syringe 10μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S, Pointstyle 2 ●●

SYRC L10-23S-ASLiquid syringe 10μl for COMBI  PAL and GC1 PAL Fixed needle gauge 23S, Pointstyle AS ●●

SYRC G25-26S-ASLiquid syringe gastight 25μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S,Pointstyle AS ●●

SYRC G100-26S-ASLiquid syringe gastight 100μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26S, Pointstyle AS ●●

SYRC G250-26-ASLiquid syringe gastight 250μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26, Pointstyle AS●●

SYRC G500-26-ASLiquid syringe gastight 500μl for COMBI  PAL and GC1 PAL Fixed needle gauge 26, Pointstyle AS ●●

SYRSGE L10-26S-ASLiquid syringe SGE 10μl for COMBI  PAL and GC1 PAL

Fixed needle gauge 26, Cone Tip             ●●

PLG HD10001 pcs.    HD-type replacement syringe plunger for 1ml Headspace syringe●

PLG HD25001 pcs.    HD-type replacement syringe plunger for 2.5ml Headspace syringe●

PLG HD50001 pcs.    HD-type replacement syringe plunger for 5ml Headspace syringe●

PLG G2510 pcs.  Replacement syringe plunger for 25μl syringe●●

PLG G10010 pcs.  Replacement syringe plunger for 100μl syringe●●

PLG G25010 pcs.  Replacement syringe plunger for 250μl syringe●●

PLG G50010 pcs.  Replacement syringe plunger for 500μl syringe●●

Trays, Traysets, Tray Holders, Thermostatted Tray Holders and Stack

PAL TrayCooler-xtPeltier tray cooler 4°C to 70°C for one PAL Tray2ml (without tray) consisting of:

 1 pc  Tray Cooler with 84mm legs

 1 pc  Tray cover for PAL Tray2ml

 1 pc  Power supply 100-240V  incl. Temperature Regulator●●

PAL TrayCooler2-xtPeltier Tray Cooler 4°C to 70°C for one PAL Tray2ml or one Cooling plate 20ml MP 50-031 consisting of:

1pc TrayCooler with 136mm legs

1pc Cooling plate for 20ml vials

1pc Tray cover for PAL Tray2ml

1pc Power Supply 100-240V incl. Temperature Regulation ± 1°C●●

PAL LiqCoolerLiquid Tray Cooler 4°C to 70°C*  for 1 PAL Tray2ml consisting of:

1pc LiqCooler with 84mm legs

1pc plastic tray cover for PAL Tray2ml

(circulator connection tube OD 8mm) 

(*excluding PAL Tray2ml and external heating/cooling circulator) ●●

PAL LiqCooler2Liquid Tray Cooler 4°C to 70°C* consisting of: 

1 pc TrayCooler with 136mm legs

1 pc Cooling plate for 20ml vials

1 pc plastic tray cover for PAL Tray2ml

(* excluding PAL Tray2ml and external circulator)●●

MC 30-10Plastic Tray Cover  to use 1 PAL Tray1ml in PAL Tray Coolers●●

MC 30-11Plastic Tray Cover  to use 1 PAL Tray2ml in PAL Tray Coolers●●

MC 30-14Plastic Tray Cover  to use 1 96 well MT/DW in PAL Tray Coolers●●

MC 50-01Adapter plate to use 1 96 well MT/DW in PAL TrayCooler or LiqCooler ●●

MP 50-031Cooling plate 32x20 for PAL LiqCooler2 and PAL TrayCooler2●●

PAL Tray1mlSample tray for 200 vials 0.7/1ml●●

PAL Tray2mlSample tray for 98 vials 2ml or 78 vials 0.7/1ml●●

PAL Tray20mlSample tray for 32 vials 10/20ml or 21 vials 2ml●●

PAL TrayMT2mlSample tray MT footprint, for 54x2ml vials for PAL Stacks all types or PAL MTHolders all types●●

PAL TrayMT2ml/6Set of 6 pcs. PAL TrayMT2ml sample trays●●

PAL TrayMT10ml/6Sample tray with Microtiter footprint for 15 vials 10ml, Pack of 6 pcs●●

PAL TraySet1mlSample tray for 200 vials 0.7/1ml, including Tray Holder 76mm●●

PAL TraySet2mlSample tray for 98 vials 2ml or 78 vials 0.7/1ml, includingTray Holder 76mm●●

PAL TraySet10mlSample tray for 32 vials 10ml or 21 vials 2ml, incl.Tray Holder 76mm (can not be used for 20ml vials)●●

PAL TraySet20mlSample tray for 32 vials 10/20ml or 21 vials 2ml, incl.Holder 114mm (positioned 38mm lower than standard holder)●●

PAL TraySet2ml-2Sample tray for 98 vials 2ml or 78 vials 0.7/1ml, incl.Holder 114mm (Holder may be alternatively used for 20ml vial trays)●●

PAL MTHolderTray Holder 76mm for 2 Microtiter/Deepwell plates or 2 PAL TrayMT2ml●●

PAL MT4HolderTray Holder 76mm for 4 Microtiter/Deepwell plates or 4 PAL TrayMT2ml●●

MR 21-00Tray holder 76mm for standard vial trays 1ml, 2ml, 10ml vials●●

MR 22-00Tray holder 114mm for standard vial trays 10/20ml vials●●

PAL Stack4DWPAL System stack for 4 micro- or deepwell plates

for deepwell plate GC operation (1 stack per GC may be used)●●

PAL StkCooler2DW-xtPeltier cooled 2DW Stack 4°C to 40°C for

2 pcs  Standard Microplates or

2 pcs  Deepwell plates or 2 pcs  PAL TrayMT2ml

including 1 pc Power Supply 110-240V LED Display, temperature regulation ±1°C●●

LHX, COMBI PAL    Dilutor Option

PAL DilutorPAL Dilutor Option for HTS PAL  or COMBI PAL consisting of:

1 pc  Dilutor module

1 pc  Connection cable

1 pc  Dilutor syringe 2.5ml

 1 pc  Transfer tube 1/16"

 1 pc  Solvent bottle 1000ml

 1 pc  Aspirating tube 1/8"

(requires PAL PAL SyrGCSP80μl, PAL SyrGCSP20μl)●

PAL SyrGCSP80ulKit Dilutor Syringe 80μl for COMBI  PAL consisting of:

1pc   Sideport Syringe Plunger Sealing Screw

1pc   Sideport Syringe Adapter incl. Plunger Holder

1pc   Sideport Syringe 80μl SYRC SP80-R

3pcs Ndl S-26-AS Needles gauge 26, pst AS for Sideport Syringe●

PAL SyrGCSP20ulKit Dilutor Syringe 20μl for COMBI  PAL consisting of:

1pc   Sideport Syringe Plunger Sealing Screw

1pc   Sideport Syringe Adapter incl. Plunger Holder

1pc   Sideport Syringe 20μl SYRC SP80-R

3pcs Ndl S-26S-AS Needles gauge 26S pst AS for Sideport Syringe●

SYRC DIL1.0PAL Dilutor Syringe 1ml●

SYRC DIL2.5PAL Dilutor Syringe 2.5ml●

SYRC DIL5.0PAL Dilutor Syringe 5ml●

SYRC DIL10PAL Dilutor Syringe 10ml●

SYRC SP80-RSideport Syringe 80μl gastight without needle●

SYRC SP20-RSideport Syringe 20μl gastight without needle●

PLG DIL1.0Replacement Dilutor Syringe Plunger 1ml●

PLG DIL2.5Replacement Dilutor Syringe Plunger 2.5ml●

PLG DIL5Replacement Dilutor Syringe Plunger 5.0ml●

PLG DIL10Replacement Dilutor Syringe Plunger 10ml●

PLG SP8010pcs Replacement syringe plunger for 80μl Sideport Syringe●

PLG SP2010pcs Replacement syringe plunger for 20μl Sideport Syringe●

Ndl S-26-AS3pcs Replacement needle gauge 26 pst AS Sideport Syringe 80μl●

Ndl S-26S-AS3pcs Replacement needle gauge 26S pst AS Sideport Syringe 20μl●

PAL SyrOringSP801pc Perfluor O-Ring for SYRC SP80-R●

PAL SyrOringSP201pc Perfluor O-Ring for SYRC SP20-R●

PAL TubeDilHTX1pc PAL Dilutor Transfer Tubing Kit for 120cm X-axis●

PAL TubeDilutor(B)1pc PAL Dilutor Transfer Tubing Kit for 50cm or 80cm X-axis●

PAL DilAspKitAspiration tube kit, PFA tube and glass filter 40μl pore size●

1000-SV1pc Dilutor Solvent bottle 1000ml●

MM 30-361pc Dilutor Syringe Screw●

PAL DilWasher10pc PTFE Dilutor Syringe Washer●

MM 90-023-way Dilutor Valve, PCTFE●

MM 90-033-way Dilutor Valve, PTFE●

HX and COMBI PAL    SPME Option

PAL SPME-KitPAL SPME option, consisting of:

 1 pc  SPME Holder Adapter

 1 pc  Plunger Holder

 1 pc  SPME Fiber Holder

 1 pc  Fiber Assortment Kit containing 4 different Fibers

 1 pc  SPME Performance Evaluation Mix

 1 pc  SPME CD

 1 pc  SPME Application Documentation●

PAL FibCondSPME Fiber Conditioning Station consistig of:

1 pc heater up to 350°C with connection cable and bracket 40mm

1 pc flush gas connection

1 pc fitting for COMBI PAL flush gas regulator incl. tubing 1 pc alternate bracket 14mm●

PAL FibCondTubeGas tube Fiber Conditioning Station - Pressure Regulator, incl.SwageLok fittings and flow reduction●

LHX and COMBI PAL    ITEX Option

PAL ITEX-2Option1pc 1.3 ml ITEX Syringe with M7 x 0.5 Fitting

1pc Replacement plunger 1.3 ml

2pc ITEX-2 trap TENAX TA 80/100mesh incl. O-Ring

1pc Trap heater incl. electrical connections

1pc Syringe Heater incl. Plunger holder

1pc Syringe Heater side bracket 

1pc CD-ROM with ITEX Cycle

(requires PAL LHS2 and Cycle Composer)●

PAL ITEX-2Opt-LHXITEX-2 Option for PAL LHX, consisting of:

1 pc   1.3 ml ITEX Syringe with M7 x 0.5 Fitting

1pc   Replacement plunger 1.3 ml

2pcs  ITEX-2 trap TENAX TA 80/100 mesh incl. O - Ring

1 pc   Trap Heater LHX incl. electrical connections

1 pc   Syringe Heater incl. Plunger holder

1 pc   Syringe Heater side bracket

1 pc   Mounting kit LHX

1 pc   CD Rom with ITEX software

( requires PAL LHX and Cycle Composer )●

ITEX-2 TrapTXTA 1pc ITEX-2 Trap Tenax TA 80/100 mesh●

ITEX-2 TrapTXTA3 Set of 3pcs. ITEX-2 Trap Tenax TA 80/100 mesh●

SYRC ITEX-2.-1.31pc replacement ITEX-2 Syringe 1.3ml with Adapter M7x0.5●

PLG ITEX-2.-1.3 Replacement Plunger for ITEX-2 Syringe●

ITEX-2 HT ITEX-2 Trap Heating Unit●

ITEX TrapTXTA1pc ITEX Trap Tenax TA 80/100 mesh●

ITEX TrapTXTA3Set of 3pcs. ITEX Trap Tenax TA 80/100 mesh●

SYRC ITEX2.51pc replacement ITEX Syringe 2.5ml●

PLG G25001pc Replacement syringe plunger for 2.5ml syringe●

PAL MHEToolMHE Tool for COMBI PAL

1pc MHE Tool

1pc MHE Parkstation

1pc Needle MHE Gauge 22/5

1pc MHE Tool CD 

(requires PAL LHS2, COMBI PAL Firmware 3.0.5 or preferably

 PAL COMBI-xt and Firmware 4.1.X or higher)●

?

PAL COMBI  and COMBI-xt    Mounting Kits

PAL MR-5890-xtMounting hardware and interconnection cable to install a PAL / PAL-xt on an Agilent 5890 GC●●

PAL MR-7890-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Agilent 6890 / 7890 GC●●

PAL MR-7890-MQM-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Agilent 6890 / 7890 Micromass Quattro GC●●

PAL MR-Trace1310GC-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Thermo Trace 1310 GC●●

PAL MR-TRACE-OC-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt,

GC1, LHS0, LHS2 or LHX9 on a Thermo GC Trace 2000

(Thermo On-column Injector only, requires Kit Trace-OC) ●●

PAL MR-TRACE-SSL-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt,

GC1, LHS0, LHS2 or LHX9 on a Thermo GC Trace 2000

(215mm legs, for Thermo Split/Splitless and PTV Injector)●●

PAL MR-V3800/V450-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Varian GC 3800 or 450●●

PAL MR-V3900/V43x-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Varian GC 3900 or 43x●●

PAL MR-S2014-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Shimadzu GC S2014●●

PAL MR-S2010-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Shimadzu GC S2010●●

PAL MR-S2025-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Shimadzu GC S2025●●

PAL MR-Focus-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Thermo GC Focus●●

PAL MR-PEC600-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a PE Clarus600●●

PAL MR-DANI-Master-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a DANI Master GC●●

PAL MR-Bruker-436-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Bruker GC 436●●

PAL MR-Bruker-451-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Bruker GC 451●●

PAL MR-Bruker-456-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a Bruker GC 456●●

PAL MR-B3800/B450-xtMounting hardware and interconnection cable to install a PAL COMBI-xt, PAL GC-xt, GC1, LHS0, LHS2 or LHX9 on a  Bruker 3800 GC or 450-GC●●

PAL MR-Std-xtStandard Support Leg PAL-xt, 215mm, 2pcs●●

PAL MR-260mm-xtStandalone support 260.4 mm, 1 pcs●●

PAL TwinKit1-xtMounting kit  for two PAL-xt cross rails●●

PAL TwinSafetyGuardSafety Guard for PAL Twin Kit with 126 mm displacement●●

PAL XExtL-xtPAL-xt X-Axis Extension Left hand side, 126mm●●

PAL XExtR-xtPAL-xt X-Axis Extension Right hand side, 126mm●●

LHX and COMBI PAL and GC PAL    GC Mounting Kits

PAL MR-6850Mounting hardware and interconnection cable 

to install a GC1, LHS0, LHS2 and LHX9 on a Agilent 6850 GC●●

PAL MR-6850-DualMR-6850 add-on mounting hardware to align 2 Agilent 6850 GC's (requires 1 PAL MR-6850)●●

PAL MR-S17AMounting hardware and interconnection cable 

to install a GC1, LHS0, LHS2 and LHX9 on a Shimadzu GC 17A●●

PAL MR-S14BMounting hardware and interconnection cable 

to install a GC1, LHS0, LHS2 and LHX9 on a Shimadzu GC 14B●●

PAL MR-PEXLMounting hardware and interconnection cable 

to install a GC1, LHS0, LHS2 and on PE Autosystem XL or Clarus500●●

LHX and COMBI PAL and GC PAL    Software

PAL CycCompCDCycle Composer Remote Control Software for PAL System●●

CD ROM consisting of:

Cycle Composer standalone version

(Requires PAL Firmware 2.2 or higher and Windows XP/ VISTA)

PAL CycCompCD5Cycle Composer Remote Control Software for PAL System CD ROM, site license for 5 instruments consisting of:

Cycle Composer standalone version including 5 serial numbers

(Requires PAL Firmware 2.2 or higher and Windows XP/ VISTA)●●

PAL CCUpgrdCycle Composer Remote Control Software for PAL System

CD Upgrade Version 1.6 (requires Cycle Composer license number)●●

PAL CycEditPAL Cycle Editor License●●

PAL ICC-CECTC Instrument Control Components incl. Cycle Editor ●●

PAL DrvEmpPAL Driver License for Waters Empower2 Software●●

PAL DrvEmp3PAL Driver License for Waters Empower3 Software●●

LHX and COMBI PAL and GC PAL    Accessories

PAL GC-QDocInstrument Qualification for COMBI PAL and GC PAL consisting of: 1pc   LogBook

1pc   Documentation IQ procedure 

1pc   Documentation OQ procedure●●

PAL GC-ReQInstrument Requalification for COMBI PAL and GC PAL consisting of: 1pc   Documentation OQ procedure●●

PAL ToolkitTool Kit for PAL System●●

PAL LHSUpgrdHeadspace Upgrade for LHS0 COMBI  PAL Liquid only version consisting of:

1 pc Incubator for 10ml/20ml vials, shaker, temperature up to 200°C

1pc Syringe heater 2.5ml

2pc Headspace Syringes 2.5ml SYRC HS 2.5-23-5 

1 pc PAL TraySet20ml Tray for 32 vials 10/20ml incl. holder 114mm

1 pc Pressure regulator and 1 pc Magnetic transport ring

1 pc Vial transport teaching kit and 6 pcs Adapter to use 10ml vials

1 pc PAL System CD

( requires model PAL LHS0)●

PAL FlowCell Flow-Through Cell for PAL System, new design to accommodate up to 6 flow cells, consisting of* :

1 pc  Holder 88mm

1 pc  Flow-Cell Stainless Steel 316 with connectors Swagelok 1/4"

(*required external pump and transfer tubing not included)●●

MM 06-00Single Flow-Cell for PAL System, consisting of:

1 pc  Flow-Cell Stainless Steel 316 with connectors Swagelok 1/4"

1 pc  Septa

(requires PAL FlowCell)●●

PAL BCReaderBarcode Reader

Laser scanner for barcode labels on 2ml/10ml/20ml vials with magnetic caps including adapter and connection cables (PAL and PAL-xt Systems)●●

PAL BCAdapterBarcode Adapter for PAL-xt System including cable - only required when upgrading existing PAL to PAL-xt System

(Requires PAL firmware version 4.1.2 or higher)●●

USB-Ser2USB to 2 RS232 Converter (connects PAL SER ports to USB port)●●

PAL 3xSolv100Solvent Reservoir and LVI Wash Station consisting of:

1pc   Holder for 3pc 100ml vials

3pcs Solvent vials 100ml including caps and seals●●

PAL WashStd1Wash station for 2 solvents and 1standard liquid, consisting of:

1 pc Vial holder 5 x ?23mm incl. 5 pcs Vials 10ml, 5pcs Caps and Seals●●

PAL WashFast-22COMBI PAL Washstation for two solvents for high sample throughput, consisting of:

1 pc  Double wash station incl. Holder for 2 x 500ml bottles

1pc  Electrical Connection cable

2pc  Solvent bottles 500ml incl. 1 pc  Tubing Kit●

Kit FWash10001000ml Solvent Kit consisting of:

1pc    Bottle Holder bracket incl. screws

1pcs. 1000ml Solvent Bottles●

LHX and COMBI PAL and GC PAL    Spare Parts

PAL PMKit2 Preventative Maintenance (PM) Kit for PAL GC Technique●●

PAL LubKitPAL Lubrication Kit●●

PAL PaintCTCPaint for PAL System 20ml including brush (white)●●

PAL Incub6x20Incubator for 10ml/20ml vials, with shaker, temperature up to 200°C●

PAL Ins20/2ml6 pcs 2ml inserts to use 2ml vials in PAL Incub6x20●

PAL Ins20/10ml6 pcs 10ml inserts for PAL Incub6x20●

PAL AgiORing6 pcs. Drive belt for Incubator COMBI PAL●

MSH 01-00Syringe heater 1.0ml for PAL●

MSH 02-00Syringe heater 2.5ml for PAL●

MSH 03-00Syringe heater 5.0ml for PAL●

PAL SyrOring1ml10 pcs O-Ring for PAL SyrHS1.0ml ●

PAL SyrOring2.5ml10 pcs O-Ring for PAL SyrHS2.5ml●

PAL SyrOring5ml10 pcs O-Ring for PAL SyrHS5.0ml●

MSH 30-23Safety Clamp for COMBI PAL syringe heater●

100-WV100ml Solvent bottle for LC PAL Wash Station  PAL WashLarge or

PAL 3xSolv 100 Solvent Reservoir including cap and seal●●

Kit Wash 10-CVKit wash vial 10-CV for standard wash station 10 vials, 10 caps, 10 seals●●

Kit SealCap10 caps and 10 seals for 100-WV Solvent bottle or PAL WashStd1●●

PAL TubeFlushXReplacement Kit for Flush Tube-X in PAL80 crossrail●

PAL TubeFlushXYReplacement Kit for Gas Flush Tube for X-Y-Axis, complete Tube●

PAL TubeFlush LHXReplacement Kit for Gas Flush Tube LHX PAL●

Kit Flush LHXGas Flush Kit for LHX PAL, field upgrade kit●

PAL KitFlush-Ext800Gas Flush Kit external for Combi PAL 800mm, field installation kit●

MM 03-01Pressure regulator 0 - 2.5 Bar (0-35psi), including pressure gauge and fittings●

MM 09-01Fitting assembly PAL Adapter / Tube Connector for Pressure Regulator●

MM 015-01Tube Connector from Pressure Regulator to Tubing, 1/8"●

Kit SealFlush Kit Sealing Gaskets for Pressure Regulator, 10 pcs●

Kit FlushVlvKit Gas Flush Valve for all PAL GC models●

Kit FlushVlv-xtKit Gas Flush Valve for PAL COMBI-xt and PAL LHX-xt models●

KJL23-M3Elbow Adapter for Gas Flush Tube●

M-3ALU-3Gas Tube Adapter, 90°●

MX 30-27PAL X-Axis Side Cover Right hand side●

PAL FlexBandKitPAL Flexband for standard PAL50/80 Models, 1pc●●

MX 20-15Metal Angle Bracket for Ribbon Cable●●

MX 52-00Grounding Conductor for X/Y Carriage●●

MX 30-34Blind Cover for GC PAL●

MX 30-42Blind Cover for LHX PAL●

MB 20-00Holder Assembly for PAL Control Terminal●●

PAL TermCTCControl terminal for PAL system all types●●

PAL TermCTC-xtControl terminal for PAL-xt system all types●●

Kit LCD ReplReplacement Kit for PAL Control Terminal, incl. LCD-Module, flat cable, screws●●

BN4851 M4x25Screws for X-Axis Side Covers, 10pcs●●

BN4851 M3x20Screws for Y-Axis Side Covers, 10pcs●●

MSZ 01-00Magnetic Adapter Ring for 20ml vials●

MZ 23-02Needle Guide Replacement Kit for COMBI  PAL●

PAL UprNdlGdeUpper Needle Guide Assembly (Gauge 19)●●

PAL UprNdlGde108Upper Needle Guide Assembly 108mm (Gauge 19)●●

MZ 32-00Safety Shield for PAL Injection Unit●●

MX 32-00Plexiglas Safety Guard for PAL80●●

MX 37-00Screw Kit for Safety Guard all types●●

PAL TCord280Tension Cord 280mm (set of 5 pcs)●●

PAL TCord90Tension Cord 90-95mm (set of 5 pcs)●●

MZ 02-00Injection unit for LHX and COMBI  PAL●

MZ 06-00Injection unit for GC1 PAL or LC PAL ●

MZ 019-00Injection unit for COMBI  PAL-xt●

MZ 018-00Injection unti for GC PAL-xt●

PAL MZCovTopTop Cover for Z-Axis, Kit●●

PAL SlidStopKitSlider Stopper Assembly ( Z-Axis )●●

PAL StkDrwMagStack Drawer Magnet Assembly, Kit●●

MZ 50-00Ribbon Cable Z-Axis, 500mm●●

MZ 50-01Ribbon Cable for ITEX Z-Axis, 560mm●

PAL MZCovCtrlCover for Control Module Z-Axis, Kit●●

PAL MZCovCblCover for Motors and Ribbon Cable Z-Axis, Kit, (Rev. B or higher)●●

MZ 20-11Lower Needle Guide Gauge22, transport magnets installed●●

MZ 20-14Mechanical Stop for Needle Guide●●

MZ 20-15Adapter for Short Tension Cord ( Z-Axis )●●

PAL MZCtrlPCB Assembly for PAL Injection Unit, Kit, (Rev. D or higher)●●

PAL NdlBlkMagSolenoid for Needle Guide Blocking Assembly, Kit●●

PAL TubeFlushZGas Flush Tube for Z-Axis, Replacement Kit●

PAL MotZPAL Stepper Motor Z-Axis, Kit●●

PAL MotPlgPAL Stepper Motor Plunger, Kit, (For Injection Rev.B or higher only)●●

PAL MZTRack350Toothed Rack, 350mm, Kit●

PAL MZTRack300Toothed Rack, 300mm, Kit●

PAL MZZMagSwitching Magnet for Z-Sensor, Kit 

 ●●

PAL MZAgiOpenBumper for PAL Injection Unit, Kit●

PAL RCbl80Ribbon Cable Kit for X-Axis 80cm●●

PAL RCbl120Ribbon Cable Kit for PAL X-Axis 120cm, for Single Injection Unit PAL Models●

PAL RCblDualRibbon Cable Kit for PAL X-Axis 120cm, for Dual Injection Unit PAL Models●

PAL XYSensX-Y-Axis Position Sensor PCB's, Kit●●

MSB6.3AT/10Fuse 6.3AT for PAL CPU and Control Boards, pkg of 10pcs●●

SFC 4/10SupraFuse 4A for PAL CPU and Control Boards, pkg of 10pcs●●

BAT VL2330Backup Battery for PAL CPU/Control Board (1pc)●●

Kit COMBI-xt 

   Upgrade Kit for COMBI PAL to PAL COMBI-xt, incl.

1 pc Control Board-xt for PAL System - Firmware 4.1.X  or higher

1 pc side cover with gas flush valve for PAL Combi-xt 

1 pc back cover (for 80cm standard rail version) including screws cables, CD Rom●

Kit GC-xt 

 Upgrade Kit for GC PAL to PAL GC-xt,  incl.

1 pc Control Board-xt for PAL System - Firmware 4.1.X, back cover, cables, CD●

APR Control-xtControl Board for all PAL Models●●

APR Control-GCControl Board for GC PAL (non-xt)●

APR CPUCPU Board for PAL System (non-xt)●

APR MOTIOMotor Driver and Input/Output Processing Board for PAL System (non-xt)●

Cbl RS20R-760Cable 20p shielded, MiniRibbon connectors, 760mm long 

(Connection cable of COMBI PAL incubation heater , dilutor or valve drive)●

Cbl RS20R-1300Cable 20p shielded, MiniRibbon connectors, 1300mm long

(Connection cable of COMBI PAL incubation heater , dilutor or valve drive)●

Cbl RS3M-2000Power cable 2m for PAL all types 

(Connection between PAL power supply and PAL)●●

Cbl RS4C0-3000PAL Interface cable 3m long 15 pin connector - open wires●●

Cbl RS9B-3000Cable RS-232 with connector DB9 3m long (Connection PAL - PC)●●

Cbl RS9B-6000Cable RS-232 with connector DB9 6m long (Connection PAL - PC)●●

Cbl SS8J-700Cable 8p shielded, RJ45 connectors, 700mm long, LCD Terminal●●

PAL CblSerPrtrCable and adapter to connect a PAL System to a serial printer with DB 25 connector (requires Printer with serial interface)●●

MN 01-02Power supply for PAL-xt System

Power 150 Watt, Input Voltage 100-240V●●

MN 03-02Power supply for PAL StkCooler-xt and PAL TrayCooler-xt, all types Input Voltage 100-240V (specify Cooler type)●●