CBA 6G-050D

CBA 6G-050D

参考价: 面议

具体成交价以合同协议为准
2022-12-09 09:18:43
201
产品属性
关闭
深圳市北汉科技有限公司

深圳市北汉科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

CBA 6G-050D

详细介绍

1 GHz to 6 GHz 50 Watt Single Band Power Amplifier



  • Class A Operation
  • Touch Screen Color display
  • Input Overdrive Protection
  • USB, Ethernet, GPIB and RS232
    interface
  • Built in Calibrated Directional Coupler


Description

New class A, high power density, design has allowed us to produce a 50 watt, 1.0 GHz to 6 GHz amplifier in a compact 4U package. With a minimum of 50 watts of linear power this amplifier is ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range. Readily integrated with the Teseq ITS 6006 80 MHz to 6 GHz test system these amplifiers can form part of a broadband test system. The new touch screen colour display gives an immediate visual indication of forward and reverse power along with the current operating status of the amplifier and access to diagnostic information such as gate current and heatsink temperature.Fan speed adjusts depending on the heatsink temperature thus ensuring the minimum audio noise level possible in the operating environment. The inbuilt calibrated forward power coupler provides a quick and easy way to monitor forward power with any power meter. Input overdrive protection prevents damage to the input devices due to accidental high input power. Multiple remote interfaces are available as standard including USB, GPIB, RS232, and Ethernet. Amplifier gain can be controlled either remotely through one of the available interfaces or via the front panel touch screen.

 

Key Parameters

Frequency

1.0 GHz to 6.0 GHz

Saturated Power

60 W minimum (80 W nominal)

Power at P1 dB

50 W minimum (60 W nominal)

Gain

47 dB

Gain Flatness

+/-3 dB

Additional RF Data

Harmonics at 50 W

-18 dBc (Typical)

Maximum Input without Damage

+10 dBm

Spurious

-60 dBc

Stability

Unconditionally stable

Load VSWR without damage (All Phase Angles)

Infinite

RF Input

Type N (socket)

RF Output

Type N (socket)

Gain Control

0 – 30 dB in 255 steps

Impedance/VSWR

Output Impedance

50 Ω

Input VSWR

2:1

Output VSWR

2:1

Interfaces and Electrical

Interface

Touch screen, GPIB, RS232, Ethernet & USB

Safety Interlock

BNC Connector, Open for Standby

Supply Voltage

85 –264 Vac

Supply Frequency

47–63 Hz

Supply Power Requirement

< 0.6 KVA (typical full power)

Physical and Environmental

Dimensions

4U, 19 Inch Rack width, 615 mm deep

Weight

20 kg

Temperature Operational

0 °C–40 °C

Temperature Non Operating

-40 °C–85 °C

Humidity (Non Condensing)

95%

Options: To be specified at time of ordering

Rear Panel RF Connectors

CBA 6G-050D-10

Front Panel RF Connectors

CBA 6G-050D

上一篇:法国OPTEL THEVON光电传感器、功率放大器产品介绍 下一篇:E00A02V050F10M功率放大器,带宽达10MHz!
热线电话 在线询价
提示

仪表网采购电话