In rail mounting enclosure

Temperature control range 0-200°C

Relay contact 10A switching capacity

Big three-digit LCD indication

Indication selectable for °C or °F

Protected parameter level

Sure data storage in case of power failure

Application:

The 701 two-step electronic temperature controller is especially designed for controlling of electrically heated sample lines series 3/4/5-N/M/H.

Sensor input for Fe-CuNi (J), NiCr-Ni (K) thermocouple and Pt100 sensor

Control mode ON-OFF or PID

PID control mode with auto-tuning function

Alarm operation selectable with key setting for 7 operation modes

Display preselect in °C or °F

Application:

The temperature controller type 70304G is used for all heated components where the standard thermostate can be replaced by an electronique controller or where a controlling by a thermostate is not possible. Moreover, it can be used for heated sample lines in case a temperature alarm is necessary.

Ready-to-plug-in for heated sample lines type 3/4/5

In a wall-mounting housing

Easy connection

Two types with 10A or 20A

For Pt1100 with sensor breakage safety status

Application:

The TR... series ready-to-plug-in, on - off electronic temperature controllers are especially suitable for controlling electrically heated sample lines 3/4/5-N/H/M series.

Sensor input for Fe-CuNi (J), NiCr-Ni (K) thermocouple and Pt100 sensor

Control mode ON-OFF or PID

PID control mode with auto-tuning function

Alarm operation selectable with key setting for 7 operation modes

Display preselect in °C or °F

Application:

The temperature controller type 70304.2 is used for all heated components where the standard thermostate can be replaced by an electronique controller or where a controlling by a thermostate is not possible. Moreover, it can be used for heated sample lines in case a temperature alarm is necessary. For operation an additional switching relais is necessary.