圆满落幕|伊索(大连)出展上海国际传感器技术与应用展览会
时间:2023-09-25 阅读:229
沪上金秋,秋雨隐隐带着一丝凉意,
伊索的展位热度却逆势而上,热度爆棚。
在上海国际传感器展会现场,
开展三天,门庭若市。
今天,小伊陪大家回顾现场,感受如火如荼的铠装丝热潮。
ISOMIL-M
Mineral Insulated Measurement Cables
The inner conductor is generally a low resistive wire (in some cases several wires) which transmits the electrical signal. Conductors of this type are used in measurement and control techniques and thus referred to as sheathed measurement conductors.
Type denotation ISOMIL-M
Example: The type Denotation 2C2A60 designates a cable coil with 2 cores, inner conductors made of cooper, insulation made of MgO (97%), the sheath material 1.4541 and an outer diameter of 6 mm.
ISOMIL-H – Mineral Insulated Heating Cables
Mineral Insulated Heating Cables
The inner conductor is a heating wire made of suitable material and with appropriate dimensions for electrical resistance heating. This combination is called a sheathed heating conductor. Our further company MiL Heating Systems GmbH Poductname ISOHEAT offers ISOMIL-H heating elements with cold ends ready terminated in all lengths on customers requirements.
ISOMIL-T
Mineral Insulated Thermocouple Cables
In ISOMIL-T the thermoelectric voltages of the thermocouples are in accordance with the basic standard values within the usual tolerance range. For NiCr-Ni the basic values of the thermoelectric voltage are identical in the German and international standards. For both Fe-CuNi (Thermoiron-Thermoconstantan) and Cu-CuNi (Thermocopper-Thermoconstantan) they differ.