北京布莱迪(BLD)防爆感应式接点压力表-电接点压力表
北京布莱迪(BLD)防爆感应式接点压力表-电接点压力表

YXG/YXGN/YXGS-100北京布莱迪(BLD)防爆感应式接点压力表-电接点压力表

参考价: 面议

具体成交价以合同协议为准
2017-06-22 10:49:49
673
属性:
安装结构型式:直接安装;测量范围:-100Kpa-0,0-60MPa;公称直径:100、160mm;环境温度:20℃~+60℃℃;精度等级:1.6;适用领域:石油,化工,冶金,电力,供水,热力管网,油气传输,车辆维修,其他;
>
产品属性
安装结构型式
直接安装
测量范围
-100Kpa-0,0-60MPa
公称直径
100、160mm
环境温度
20℃~+60℃℃
精度等级
1.6
适用领域
石油,化工,冶金,电力,供水,热力管网,油气传输,车辆维修,其他
关闭
山东中航高科自动化技术有限公司

山东中航高科自动化技术有限公司

免费会员
收藏

组合推荐相似产品

产品简介

YXG系列防爆感应式接点压力表的接点形式为感应式接近开关,由于是非接触式接点,所以对供电系统不产生任何损耗,该仪表无电火花,使用寿命长,对测量精度影响小,不仅适用于某些有爆炸危险的场所,也特别适合设备频繁开关的场合使用。具有对工艺流程中的流体介质的压力参数进行检测、自动控制、自动报警等功能。
济南盛旺科技发展有限公司正式更改为山东中航高科自动化技术有限公司!
不变!谢谢!

详细介绍

YXG系列防爆感应式接点压力表的接点形式为感应式接近开关,由于是非接触式接点,所以对供电系统不产生任何损耗,该仪表无电火花,使用寿命长,对测量精度影响小,不仅适用于某些有爆炸危险的场所,也特别适合设备频繁开关的场合使用。具有对工艺流程中的流体介质的压力参数进行检测、自动控制、自动报警等功能。
YXG系列防爆感应式接点压力表是按GB3836.1 《爆炸性气体环境用电气设备通用要求》和GB3836.4《爆炸性气体环境用电气设备本质安全型“i” 》标准设计制造,并经国家相关部门进行防爆检验合格。
YXG系列防爆感应式接点压力表应与P+F公司生产的安全栅配套使用, 可构成本质安全防爆系统。此系统适用于1 区和 2 区具有爆炸性气体的区域。

The switch of YXG series explosion-proof inductive pressure gauge is inductive ap-
proach form, because of non-contact-type, it have not any spoilage to the power supply system. Without electric spark, long using life, little impact on the measurement accuracy, it is not only applicable to certain dangerous places, but also suitable for frequent turn on/off occasions. It has the testing function, automatic control, and automatic warning to the liquid medium .
YXG series explosion-proof inductive pressure gauge is based on GB3836.1< the
request of the electric equipment used in explosive gas environment > "and GB3836.4< safe explosive gas environment electrical equipment intrinsically safety-type" I " >, and qualified the relevant departments for the national explosion test.YXG series explosion-proof inductive pressure gauge should match with safety bar P+F to be a system of intrinsically safe explosion-proof. This system is applied to 1 area and 2 area with explosive gas.

YXG系列防爆感应式接点压力表的测量系统由弹簧管、 机械传动机构、 示值部件、 感应式接点装置组成。弹簧管在被测压力作用下,产生弹性变形引起管端位移,其位移通过机械传动机构(连杆和机芯)进行放大,传递给示值部件,指针在刻度盘上指示出相应的压力值的同时,带动控制片的位置发生变化,当仪表指针与上限或下限设定指针重合时,控制片影响敏感元件的电磁场变化,使感应开关电气状态发生改变。可在设备达到设定压力时输出断 (通)态信号,与外部设备用适当的电路连接后便能发出所需的报警信号或开、停机等控制压力的动作,将系统压力控制在所需范围内。

The measure system of YXG series explosion-proof inductive contacts pressure gauge.
Is composed by the bourdon tube, mechanical transmission system, value-show components,inductive contact device.The deformation of bourdon tube under the measuring pressure causes pipes -displacement, and the displacement is enlarged by mechanical transmission organizations(connecting rod and movement), which is transferd to value-show components. Then the value of the pressure is indicated and the position of control patch is changed. When the up and down limits set become to be coinciding, the control patch affects the electromagnetic field changes to transform the state of electrical switches.With the output of turn on/off signal, to send the alarm or start/stop machine after connecting outer equipment, control system pressure within required range.

主要技术指标
YXG弹簧管标准型 YPXG膜片标准型
YXGS弹簧管密闭型 YPXGS膜片密闭型
YXGN 弹簧管耐震型YPXGN膜片耐震型
YXG Bourdon tube standard type YPXG Diaphragm standard type
YXG Bourdon tube obturation type YPXGS Diaphragm obturation type
YXGN Bourdon tube vibration-proof type YPXGN Diaphragm vibration-proof type
φ 100mm、φ160mm
①≥ 0.1MPa弹簧管型 ②<0.1MPa膜片型
①≥ 0.1Mpa Bourdon tube type ②<0.1Mpa Diaphragm type
电感式接近开关,输出方式见附表
φ 100mm弹簧管型: (≥0.4MPa) :1.0、1.5级(1.6 级) ;
(< 0.4MPa及真空) :1.5级(1.6级) ;
φ 160mm弹簧管型: (≥0.1MPa) :1.0、1.6级(1.5 级) ;
(真空) :1.6级(1.5级) ;
φ 100mm膜片型:2.5 级;≥10kPa 1.5级(1.6级)
φ 160mm膜片型:1.6 级(1.5级)<10KPa 2.5级
φ 100mm Bourdon tube type: (≥0.4MPa): 1.0%, 1.5%(1.6%);
(<0.4Mpa & vacuum =:1.5%(1.6%);
φ160mm Bourdon tube type: (≥0.1MPa): 1.0%, 1.6%;
(vacuum)1.6%
φ100mm Diaphragm type: 1.5%(1.6%), 2.5%;
φ 160mm Diaphragm type: 1.6%;
① 0~0.1至 0~60MPa、-0.1~0各系列及任何相关正负压联程
② 4kPa~100kPa、-100kPa~0各系列及任何相关正负压联程
① 0-0.1to 0-60Mpa, -0.1-0 series and compound ranges
② 4Kpa-100Kpa, -100Kpa-0 series and compound ranges
①额定电压:8VDC,安全使用电压<16VDC
②工作电流:通态≥3mA,断态≤1mA,安全使用电流<52mA
③开关频率:<5000Hz
① Pressure gauge fixed: 8VDC, Safe voltage <16VDC
② Working current: Opening ≥3Ma,Closed≤1Ma,Safe current<52mA
③ On/off frequency <5000Hz
-
20℃~+60℃
Exib Ⅱ CT6
CE052074
①标准型:IP54 ②密闭型、耐震型:IP65
① Standard type:IP54
② Obturation & vibration-proof type:IP65
仪表填充液
Special Instrument liquid.

上一篇:电接点压力表产品工作原理 下一篇:隔膜压力表与膜片压力表的区别
热线电话 在线询价
提示

仪表网采购电话