YXK-160 位式控制压力表采用弹簧管作为测压敏感元件， 在对被测流体介质压力进行控制 （输出通断信号）的同时，可同步指示出被测压力值。
该仪表的控制和指示系统分别由相互独立的弹簧管带动，性能稳定可靠。并使用大功率微动开关，可对一般机械设备进行直接控制。

Brief
YXK-160 bit type control pressure gauge use the bourdon tube as the snsitive element, while controlling the liquid medium pressure (export switching signal), it
can indicate the pressure value. The control and indication system are lead by
separate bourdon tube, have stable performance. And it use high efficient microswitch, may control direct
common mechanical device.

主要技术参数
公称直径 φ 160mm
指示精确度 ± 1.5%
设定精确度 ± 2.5%
切换差 6%～15%
测量范围 0～0.1至 0～25MPa 各系列
-0.1～0.15 至 -0.1～2.4MPa 各系列
接点形式 大功率微动开关
接点数量 1 或 2 个
接点zui大容量 AC 220V × 15A
AC 380V × 8A
DC 24V× 1.5A 阻性负载
测压部件材质 接头：SUS316
测压元件：SUS316L
外壳材质 铸造铝合金（黑色）
仪表玻璃 有机玻璃
工作环境条件 温度：-25℃～+55℃
湿度：＜ 95%
防护等级 IP54
绝缘电阻 不小于 20M Ω
绝缘强度 50Hz 1500VAC 耐压1min

Main technic index
Diameter: φ 160mm
Accuracy: ± 1.5%
Set accuracy: ± 2.5%
Difference of switch: 6%～15%
Range: 0～0.1 to 0～25MPa (for all)
-0.1～0.15 to -0.1～2.4MPa (for all)
Contacts mode: Large power microswitch
Quantity of contacts: 1 or 2
Maximum capacity of contacts: AC 220V × 15A
AC 380V×8A
DC 24V× 1.5A resistant load
Part materials of measurement pressure:
Socket SUS316
Element of measurement pressure: SUS316L
Materias of case: foundry aluminium alloy (black)
Glasses: Organic glass
Working ambient conditions
Temperature:-25℃～+55℃
Humidity: ＜ 95%
Protection class: IP54
Insulating resistance: not less than 20M Ω
Insulating strengthness:
50Hz 1500VAC pressure-resistant 1min