产品概述：
JLSZ-35计量箱是在同类产品的基础上改进而成，由国外进口户外绝缘树脂（瑞士CibaCW5837）真空浇注而成，其结构新颖，体积小巧，具有耐电弧、耐紫外线、耐老化、寿命长等特点。适用于额定频率50Hz，额定电压35Kv的交流电力系统中作有功、无功电能计量。外形采用防雨伞裙，表面爬电距离大，二次端子加有金属保护罩密封，防雨、防尘、耐腐蚀，是城乡电网改造的理想换代产品。JLSZV-35KV防窃电型干式计量箱

使用条件：
1、安装场所：户外
2、环境温度：-40至+65
3、海拔：海拔高度不超过2000m
4、无腐蚀性气体
柱上35KV干式计量箱-组合互感器
技术参数：
1、额定电压：35kV；
2、准确等级：0.2S、0.2、0.5S、0.5；
3、额定电压比：35000／100V；
4、额定一次电流：5800A
5、额定二次电流：5A或1A；
6、额定容量：电压部分：0.2级，2040VA；
7、电流部分：0.2S级、0.2级，1520VA
结构与特点
JLSZV-35KV防窃电型干式计量箱为户外、油浸式全密封结构,主要由两台单相电压互感器和两台电流感器组成，用变压器油做绝缘介质，一、二次出线别用瓷套管和二次出线板安装在面板上引出。油箱和瓷套内充满变压器油,储油柜上有油位计,油箱下部装有放油嘴,油箱底座上有供安装固定的安装孔。产品具有计量精度高、重量轻、安装方便、防窃等优点。
订货须知
订货时请提供以下参数：
产品型号。 额定电流比 A。 额定电压比 kV。 准确级组合及额定输出 VA。 环境海拔高度 m。
注:用户如有特殊要求可与我公司协商确定

Product Overview:

JLSZ-35 metering box is improved on the basis of similar products. It is made by vacuum pouring of imported outdoor special insulating resin (CibaCW5837, Switzerland). It has novel structure, compact size, arc resistance, ultraviolet resistance, aging resistance and long service life. It is suitable for active and reactive power metering in AC power system with rated frequency of 50Hz and rated voltage of 35Kv. Umbrella skirt with large creeping distance on the surface, metal protective cover seal on the secondary terminal, rain proof, dust proof and corrosion resistance, is an ideal replacement product for urban and rural power grid transformation.

Conditions of use:

1. Installation Place: Outdoor

2. Environmental temperature: - 40 to + 65

3. Altitude: altitude not exceeding 2000m

4. Non-corrosive gases

35KV Dry Metering Box on Column-Combined Transformer

Technical parameters:

1. Rated voltage: 35kV;

2. Accuracy grade: 0.2S, 0.2, 0.5S, 0.5;

3. Ratio of rated voltage: 35000/100V;

4. Rated primary current: 5800A

5. Rated secondary current: 5A or 1A;

6. Rated capacity: Voltage: 0.2, 2040VA;

7. Current: 0.2S, 0.2, 1520VA

Structure and characteristics

This type of combined transformer is outdoor and oil-immersed fully sealed structure. It mainly consists of two single-phase voltage transformers and two current transformers. Transformer oil is used as insulation medium. The first and second outlets are installed on the panel with ceramic bushing and secondary outlet plate. The oil tank and porcelain sleeve are filled with transformer oil. There is an oil level meter on the oil tank. The lower part of the oil tank is equipped with an oil discharge nozzle. There are fixed installation holes on the base of the oil tank. The product has the advantages of high measurement accuracy, light weight, convenient installation and anti-theft.

Instructions for ordering

Please provide the following parameters when ordering:

Product model. Rated current ratio A. Rated voltage ratio KV. Accuracy level combination and rated output VA. Environmental elevation M.

Note: Users with special requirements can negotiate with our company to determine.