ts27r is mounted on the machine table. it enables the user to set tool length and diameter of rotating tools, and to carry out broken tool detection.
as with all renishaw hard-wired probe systems, ts27r requires themi 8 interface to convert probe signals into an acceptable form for the cnc machine control.
ts27r features and benefits
the standard tool setting probe for machining centres
compact table mounting
precise tool length and diameter measurement
rotating tools can be checked without wear to the tool or stylus
stylus is protected by a weak link, preventing probe damage in the event of a collision
ts27r specification
specification
sense directions
±x, ±y, +z
weight
650 g （23 oz）
transmission type
hard-wired
uni-directional repeatability （max 2 sigma at stylus tip）
1.0 µm （0.00004 in）
trigger force
lowest force
highest force
1.3 n （4.6 ozf）
2.4 n （8.5 ozf）
stylus overtravel
xy plane
+z direction
±10°
5.5 mm （0.21 in）
maximum recommended stylus length
cranked stylus
27 x 33 mm （1.06 x 1.3 in）
sealing
ip x8
mounting
12 mm （0.5 in） t-bolt （not supplied）.
optional spiral pins to allow accurate re-mounting.
compatible interface
mi 8 /mi 8-4
software for ts27r
renishawtool setting software allows you to set tool length and diameter offsets for single point and multiple point tools, perform in cycle broken tool detection and manual or automatic （programmed） positioning.
