详细介绍

MWIR 热像仪模块+连续变焦镜头

Neutrino® Ground ISR 系列

转到支持页面

Neutrino Ground ISR 系列是为开发陆基情报、监视和侦察 (ISR) 系统的集成商提供的交钥匙解决方案。该系列将 Teledyne FLIR 的中波红外 (MWIR) 热像仪模块和连续变焦 (CZ) 镜头与 InVeo Designs LLC 市场的图像处理和控制电子设备相结合，以较低的转换成本提供高性能 ISR 解决方案。Neutrino Ground ISR 系列不受国际贸易条例 (ITAR) 限制，通过提供工厂集成的 MWIR 成像系统，以及可靠、长寿命的线性冷却器和业界采用的成像电子设备，可降低开发风险并缩短上市时间。

Neutrino SX12 ISR1200 是 Neutrino Ground ISR 系列的个型号。该产品采用 1280×1024/12 μm 分辨率的焦平面阵列 (FPA)、120 mm 至 1,200 mm 的 CZ 镜头和*的图像处理，是一款可集成到远程陆基 ISR、周界监控、边界监控和反无人机 (CUAS) 系统中的理想 OEM 热像仪模块。

面向集成商的交钥匙解决方案

性能的 CZ 光学组件和 HD MWIR 热像仪模块

长焦距、性能驱动型 MWIR HD 热像仪，配备长寿命线性冷却器和充分集成的 CZ 光学组件。
专为集成商而设计

业界采用的 InVeo Designs LLC 成像电子设备，结合 MWIR 热像仪和 CZ 镜头，可提供的性能和兼容性。
Teledyne FLIR 的价值和声誉

Teledyne FLIR 的高性能、可靠性和产品支持，以及业内功能面的高清 (HD) MWIR 热像仪产品组合。

认识 Neutrino 系列

Teledyne FLIR 可满足您的任何中波红外 (MWIR) 成像应用需求。Teledyne FLIR 的 Neutrino’ 产品组合提供 SWaP+C 优化 VGA、SXGA 和 QXGA 分辨率摄像头模块，配备长寿命/低振动线性冷却器、通用摄像头接口和各种连续变焦镜头组合，是目前的解决方案。

技术参数

Electrical

Center of Gravity: See Mechanical IDD

Thermal Extraction Method: Heat sink, see IDD

输入功率: 24 VDC & 2.2 A Peak@ Cooldown, 23 °C

Environmental & Approvals

Cooler Interface (Predictive maintenance): Monitors Operating Parameters:

Input Voltage and Current
Expander Temperature
Operating Time
Cool-Down Cycles
Cool-Down Time
Sensor Operating Temperature

Fan Control: Thermostat Control of 2x Cooling Fans

Power Surge Suppress: Active Suppresses When Cooler Enabled

存储温度范围: -50 °C to +85 °C (-58 °F to 185 °F)

工作温度: 77K, <5 minutes cooldown at 23 °C (73.4 °F), typical

工作温度范围: -30 °C to +70 °C (-22 °F to 158 °F)

Mechanical

尺寸（长×宽×高）: Length: 57.91 cm (22.8 in) Lens Diameter: 29 cm (11.4 in)

防水等级: Front element sealed to IP-55 No Housing (Open Frame)

重量: 14.51 kg (32 lb.)

成像与光学

Boresight Drift Through Zoom: 9 Pixels (0.10 mm) + plus alignment tolerance of 10 Pixels

Cooler MTTF: Up to 25,000 Hours

Detection Recognition and Identification (DRI): The NV-IPM model results are for the NVFOV (EFL =1200mm) zoom position with a target characteristic dimension of 3.1m and target temperature of 4.0K. The ranges at which there is a 50% probability of achieving the task for the V50 measured task difficulties of 2.0 (detection), 9.0 recognition, and 13.0 (identification) are provided below.

Detection - 31 km
Recognition - 20 km
Identification - 16 km

Drifting Pixel Filter: Excessive magnitude with respect to 8 nearest neighbors

LAP/LACE: Local Area Processed Dynamic Contrast Expansion with user adjustable background level and foreground boost

Min to Max Zoom Time: 4 Seconds

Spatial Noise Reduction: 3x3 Median Filter, 3x3 Gaussian Noise Reduction Filter, 5x5 Gaussian Noise Reduction Filter

Wide to Narrow Co-Boresight: 12.5 Pixels (0.15 mm) + plus alignment tolerance of 10 Pixels

变焦和对焦控制: Manual (Four Speeds), Zoom to Specified Angle, Preset FOV (Infinity Focus)

传感器材料: InSb

非均匀性校正（NUC）: Factory Calibrations: Two point (gain/offset), One-point update (optimizes offset), Defective / noisy pixel detection, 8 Op Modes with 2 NUC tables each

Operational (Run-Time) Calibrations: One-point refresh

光谱带: 3.4 -5.0 µm

光圈: f/5.0

焦距: 120-1200 mm, HFOV 7.2° to 0.72°

镜头类型: 10x Continuous Zoom Maintain Focus Distance Through Zoom

全帧频: 30 Hz (Standard Gain), 60 Hz (High Gain)

热像仪: 1280 x 1024 Pixels (ISC1308)

数字变焦: 1X/2X/4X Edge Preserving

调焦: Manual, Manual Focus Bumping, Focus to Specified Distance, Focus to Infinity, Commanded / Continuous Autofocus

调色板: Monochrome (3 Palettes)
False Color (11 Palettes)
True Color (3 Palettes) for Splash Screen
Normal or inverted display polarity

像素间距: 12 µm

制冷器: Cobham Carleton LC1062 Linear Stirling

辐射测量

快门: Integrated Shutter for 1-Point Flat Field Correction (FFC)

连接与通信

Dual Parallel Outputs: Camera Link (Base) Output (14-bit NUC Corrected at Full Frame Format):
30 Hz (Standard Gain)
60 Hz (High Gain)

Display Output Options (10-bit (14 optional) fully processed video) (Select One):
720p60 HD-SDI (SMPTE)
1080p30 HD-SDI (SMPTE)
60 Hz 1280x1024 Camera Link (Base)

通信: RS-422 UART COM, up to 921,600 Baud

产品简介