| | | HYRE SERIES |
Appearance
50(W) 50(H) 70(D)
| | | Pulse | 10.60·100·200·300·400·500·600.1000.2000.3000.5000.6000. | | Ratings | Power voltage | 5…24VDC | | Ripple | Max. 3%rms | | Power consumption | Max. 60mA(A, B, Z 3 phase all used) | | Output wave | signal | A phase, B phase phase dirrerance A and B 90∑【45∑ | | duty ratio | 50∑ 【25∑ | | Signal width | 50…150% (Z phase) | | High/Low time | 3Я Max.(cable 50Cm Max.) | | Output | TR. output(open collector) | | Ouput voltage | "H" | Power voltage - Min. 3.5V | | "L" | Max. 0.4V | | Output current | Outflow"H" | Max. 10mA | | Inflow"L" | Max 30mA | | Load power voltage | DC 30V below | | Starting torque | Max. 30g·Р | | Shaft inertia moment | Radial : 5Ц Thrust : 3Ц | | Shaft allowance load | 5000 rpm | | Max. revolution | 1.2】10/rpm : times | | Bearing life | Approx. 200g | | Net weight | -10∩…+50∩ | | Ambient humidity | 35…85% RH | | Dielectric strength | 500VAC per 1minute(Between terminal and case) | | Insulation resistance | MIn. 50й (Between terminal and case) | | Vibration | Range amplitude width 0.75mm, 10…55Hz 3 spindle directions | | Shock | 50G. 11ms 3 spindle directions | | | | | PSC SERIES |
Appearance
98(W) 61(H) 130(D)
| | | MODEL AND UNIT | PSC-MA | SC-MB | PSC-MC | PSC-YA | PSC-YB | PSC-YC | | 1m | 1cm | 1mm | 1mm | 0.1YARD | 0.01YARD | | Ratings | Power voltage | 5…24VDC | | Ripple | Max. 3%rms | | Power consumption | Max. 60mA | | Output wave | signal | A phase, B phase phase dirrerance A and B 90∑【45∑ | | duty ratio | 50∑ 【25∑ | | Signal width | 50…150% (Z phase) | | High/Low time | 3岐 Max.(cable 50Cm Max.) | | Output | TR. output(open collector) | | Ouput voltage | "H" | Power voltage - Min. 3.5V | | "L" | Max. 0.4V | | Output current | Outflow"H" | Max. 10mA | | Inflow"L" | Max 30mA | | Load power voltage | DC 30V below | | Starting torque | Max. 30g〕妓 | | Shaft inertia moment | Radial : 5孛 Thrust : 3孛 | | Shaft allowance load | 5000 rpm | | Max. revolution | 1.2】10/rpm : times | | Bearing life | Approx. 200g | | Net weight | -10∩…+50∩ | | Ambient humidity | 35…85% RH | | Dielectric strength | 500VAC per 1minute(Between terminal and case) | | Insulation resistance | MIn. 50抄 (Between terminal and case) | | Vibration | Range amplitude width 0.75mm, 10…55Hz 3 spindle directions | | Shock | 50G. 11ms 3 spindle directions | | | | | 类型 | Φ50轴型旋转编码器（增值型） | | 型 号 | Totem Pole Output | ENB - □□□ -2 -1 | ENB - □□□ -3 -1 | | NPN open collector ouput | ENB - □□□ -2 -2 | ENB - □□□ -3 -2 | | 电压输出 | ENB - □□□ -2 -3 | ENB - □□□ -3 -3 | | Line driver output | ENB - □□□ -2 - L | ENB - □□□ -3 - L ＊ | | 外形尺寸 | Φ50,长90mm] [轴外径φ8] | | 脉冲周期（P/R) | 1,2,5,10,15,20,25,30,40,45,50,60,75,100,120,140,150,200,240,300,360,
400,500,512,600,1000 (Option) | | 电 气 特 性 | 输出相 | A相，B相，Z相(1,2,10,20,25 P/R 制品只输出A,B 相） | | 输出相位差 | A,B相相之间的位相差：T/4 ±T/8 (1 cycle=T of A phase) | | 控
制
输
出 | Totem Pole Output | LOW →负载电流zui大30mA,残留电压zui大0.4V HIGH→负载电流zui大10mA,输出电压(电源电压-1.5)V以下 | | NPN open collector ouput | 负载电压：zui大30V 负载电流：zui大30mA 残留电压zui大0.4V | | Line driver output | LOW →负载电流zui大20mA,残留电压zui大0.5V HIGH→负载电流zui大20mA,输出电压2.5V以下 | | 应答速度
(上升,下降) | Totem Pole Output | Max.1us(配线长：2m,at Isink =10mA） | | NPN collector Output | Max.1us(配线长：2m,at Isink =30mA） | | Line driver output | Max.1us(配线长：2m,at Isink =30mA） | | zui大应答周波数 | 100 KHz | | 额定电压 | DC 5~24V ±5%(幅度P-P:Max.3%） | | 消耗电流 | zui大60毫安（无负载） | | 连接方式 | 配线连接 | | 机 械 特 性 | 起动力矩 | zui大：250gf ·cm (24500uN·m) | | 惯性力矩 | zui大：80g·cm2 (8x10-6kg·m2) | | 轴负重 | 径向：10kg,轴向：2.5kg | | 轴向偏差 | 径向：0.1mm以内，轴向：0.2mm | | zui大转数 | 5000rpm | | 保护结构 | IP 50(IEC规格） | | 配线安装 | 5P,Φ5mm,长：2m，屏蔽电缆 | | 重量 | 约308克 | | 附件 | φ8mm连轴器，托架 | | |
