Agilent 37718B

OmniBER 718B Communications Performance Analyzer

SONET/SDH testing at all rates up to 622 Mb/s

Agilent's OmniBER 718 (37718B) communications performance analyzer is a single-box portable multi-rate BER and jitter tester up to 622 Mb/s (OC-12/STM-4) for development, qualification manufacture of SONET, SDH, ATM,POS network equipment sub-assemblies, line cards and devices.

••ATM and POS test capability to 622 Mb/s, upgradeable to 2.5 Gb/s

•Concatenated payloads at all synchronous rates up to 622 Mb/s

•SmartTest facility for fast test setup

•Automatic detection of mixed payload signal structures

•Accurate measurement of protection switching times (ring and linear networks)

•Jitter generation and measurement at all rates (1.5, 2, 8, 34, 45, 140, 52, 155, 622 and 2,488 Mb/s)

•Jitter testing to ITU-T and cordia recommendations

Options

••001 - SDH rates of 622 Mb/s, 155 Mb/s, and 52 Mb/s

•002 - Dual Standard Sonet/SDH; rates of 622 Mb/s, 155 Mb/s, and 52 Mb/s; (OC1 thru OC-12)

•012 - PDH/T-Carrier Interfaces;DS1, DS3, and 2/3/34/140 Mb/s

•104 - 1310 nm Optical Interface

•105 - 1550 nm Optical Interface

•106 - Dual wavelength 1310 nm and 1550 nm Optical Interface

•200 - Adds jitter Tx/Rx capability

•210 - Adds optimized jitter receiver intrinsics; requires option 200 be installed.

•300 - ATM payloads; requires option 355 be installed.

•310 - Packet over Sonet/SDH; requires option 355 be installed.

•355 - Advanced Payload Engine; adds service disruption history, timestamping, and A1S measurements

•601 - Remote Control/Printer Interfaces; RS-232C, GPIB, LAN, & Parallel

•602 - 80-column in-lid graphics printer

•610 - Replaces FC/PC optical interface adapters with SC adapters

•611 - Replaces FC/PC optical interface adapters with ST adapters