FT-3900粉末屈服强度分析仪

FT-3900 powderyield strength analyzer
一、描述：description:

自动化测量控制模块，PC软件系统对数据图谱及报表分析，少量样品，可设定之变化应力.
采用单轴测试法：通过给粉末一个固定或多个固结应力，与其破坏这个固结应力所需要的无侧限屈服强度应力（也叫开放屈服强度）来评价和评估粉体流动函数、体积密度、流动因子，时间固结函数等数据来分析粉末的流动表征.通过测量我们可以分析料斗、仓储、运输、传输过程中、压片工艺、混料、粉体的结块、搭桥及不流动现象，实验室质量管控，对供应商的选择及合理调整配方及成本.
一般来讲粘性粉体的固结应力会大于破坏这个应力下粉体的无侧限屈服强度应力，表征粉体的流动性低些；反之对于能自由流动的粉体会小.

High-precision automated measurement and control module,PC software system for data analysis and report analysis, only a small numberof samples can be set to change the stress.

The uniaxial test method is used to evaluate andevaluate the powder flow function by plotting a fixed or multiple consolidationstress to the powder, as well as the unconfined yield strength stress (alsocalled open yield strength) required to destroy the consolidation stressDensity, flow factor, time consolidation function and other data to analyze theflow of the powder characterization.Through the measurement we can improve andprevent hopper, storage, transportation, transmission process, tablettingprocess, mixing, powder agglomeration, Non-flow phenomenon, laboratory qualitycontrol, help quality suppliers to choose and improve the formula and reducecosts.

In general, the consolidation stress of the viscouspowder will be greater than the unconfined yield strength stress of the powderunder this stress, which indicates that the fluidity of the powder is lower;otherwise, the free-flowing powder will be small.

二、参数parameter：

1.应力范围Stress： 0-1000kPa

2.样品量Samplevolume of at least: 10ml

3.数据自动分析和处理结果. Data automatic analysis and processingresults.

4.自动高度数据采集. Automatic height data acquisition.

5.电源Power：220v

6.工作环境：实验室条件Working environment: laboratory conditions

7.净重量约Netweight about：35kg

8.压力校准砝码Pressure calibration weight:2个

9.其他规格样品槽可以定制Other specifications Trace sample tank can becustomized.