FT-104A氧化铝/氟化铝安息角测定仪 

FT-104Aaluminum oxide/fluorinated aluminium angle of repose meter

一．参照标准standard：

GB/T6609.24-2004《氧化铝化学分析方法和物理性能测定方法：安息角的测定》。

It was designed and manufactured accordingto the national standard GB/T6609.24-2004 "the method of chemical analysisof alumina oxide and the method of physical performance measurement: "determinationof repose angle ".

YS/T581.13氧化铝化学分析方法和物理性能测定方法 安息角的测定》。

Conforms to YS/T581.13 . technicalspecification “aluminium oxidechemical analysis method and the measurement method of physical performanceangle of repose measurement”.

二.参数资料

不锈钢漏斗：上内径74mm、下料口内径6mm两档板间装有孔径为1mm的筛网。此漏斗被紧固在支架上。

SS funnel: upper inner diameter 74mm, feedopening inner diameter 6mm,

between the two baffle plates with 1mmsieve. The funnel is fastened on the bracket.

电镀钢底板：底板由钢制成材料制成，尺寸为：宽200mm、长270mm、厚18mm。在抛光电镀的底板上表面上刻有四条互成45?角的直线。正好在漏斗处的中心部分有1个固定高度量规的定位销，底板下面有可调水平的支脚。

Electroplated steel bottom plate: Thebottom plate is made of steel, minimum size: width 200mm, length 270mm, thick18mm. On the surface of polished electroplated steel bottom plate carved fourstraight lines with 45 degree angles each other. There are 1 position pin for fixedheight gauge in the center part of the funnel, the bottom plate is providedwith adjustable feet.

漏斗固定器:由不锈钢组成，其结构应紧固。漏斗中心线垂直于中心定位销。

Funnel holder: made of stainless steel, thestructure should be fastened.

Funnel center line perpendicular to centerposition pin.

高度量规（决定高度的金属圆柱体）：它是表面抛光的由不锈钢制成的圆柱体，高40mm，底部有一凹槽，以便同底板的定位销中心相衔接。

Height gauge(Metal cylinder for determinethe height): it is a polished stainless steel cylinder, height 40mm, a grooveat the bottom, so as to connect with the positioning pin center of the bottomplate.

重量Weight：约16kg

FT-104A 氧化铝/氟化铝安息角测定仪 视频文件链接：

/v_show/id_XMTMyMTM2NzM5Ng==.html?spm=a2hzp.8253869.0.0