品牌
生产厂家厂商性质
上海所在地
韩国OSCG防爆格兰密封接头(OSER-Z)
面议韩国OSCG非铠接管型防爆葛兰(OSXP-F)
面议韩国OSCG非铠防爆葛兰(OS-A2F-U)
面议韩国OSCG防爆弯接头(OSAE Elbow-90°)
面议韩国OSCG铠装防爆填料函(OS-E1UF/LS)
面议韩国OSCG铠装防爆格兰头(OS-E1UF)
面议韩国OSCG非铠防爆葛兰(OS-A2F-UD)
面议OSCG格兰附件(螺母/齿型垫片/接地片)
面议OSCG防爆格兰附件系列(护套等)
面议OSCG防爆变径(OSRA Reducer/Adaptor)
面议OSCG防爆呼吸阀(OSBD Breather Drain)
面议韩国OSCG非铠防爆格兰(OS-EXBF-A)
面议UL认证Hawke防爆格兰(Hawke ICG 653/Universal Cable Gland)
Hawke防爆格兰(Hawke ICG 653/Universal Cable Gland)
上海颐品自动化,:
上海颐品自动化,:
Outdoor or indoor use. Group II Hazardous Area
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a) Cable inner sheaths that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.
Example without options: ICG 653/UNIV / C / M32 / Brass
Example with alternative clamping ring option: ICG 653/UNIV / C / 1¼" NPT / Brass / AR
Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
The ICG 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.
CABLE GLAND SELECTION TABLE | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size Ref. | Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | ||||||||||
Inner Sheath/ Cores | ‘B’ Outer Sheath | ‘C’ Armour/Braid | ||||||||||||
Metric | NPT * | ‘D’ Max. Over Cores | ‘E’ Max. Inner Sheath | NOTE 1 Max. No. Of Cores | NOTE 2 Max. No. Of Cores | Across Flats | Across Corners | |||||||
Standard | Option | Min. | Max. | Orientation 1 | Orientation 2 | |||||||||
Os | M20 | ½" | - | 8.9 | 10.0 | 12 | 6 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 24.0 | 26.5 |
O | M20 | ½" | - | 8.9 | 10.0 | 12 | 6 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 24.0 | 26.5 |
A | M20 | ¾" | ½" | 11.0 | 12.5 | 15 | 10 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 30.0 | 32.5 |
B | M25 | 1" | ¾" | 16.2 | 18.4 | 30 | 21 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 73.6 | 36.0 | 39.5 |
C | M32 | 1¼" | 1" | 21.9 | 24.7 | 42 | 42 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 78.0 | 46.0 | 50.5 |
C2 | M40 | 1½" | 1¼" | 26.3 | 29.7 | 60 | 60 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 82.4 | 55.0 | 60.6 |
D | M50 | 2" | 1½" | 37.1 | 41.7 | 80 | 80 | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 88.7 | 65.0 | 70.8 |
E | M63 | 2½" | 2" | 47.8 | 53.3 | 100 | 100 | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 92.7 | 80.0 | 88.0 |
F | M75 | 3" | 2½" | 59.0 | 66.2/65.3 † | 120 | 120 | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 99.4 | 95.0 | 104.0 |
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. Note 1: ATEX/IECEx certification only. Note 2: All other certification. |
中国区分销商:
上海颐品自动化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*: