FUSION SPLICER
The Fujikura FSM30S fusion splicer is the new generation automatic core alignment splicer. The FSM-30S utilizes the direct core monitoring Profile Alignment System (PAS) to achieve ultra low loss and very accurate splice loss estimation regardless of fiber quality or age. While smaller and lighter than previous models, the FSM-30S has increased capabilities and more operating modes. The FSM-30S optical system and microprocessor automatically align the fibers and inspect cleave quality. By using the Eccentricity Correction Function (ECF), the splicer determines the fiber core/cladding eccentricity and automatically compensates for in order to assure precise core alignment of the completed splice. The field-proven performance and reliability of Fujikura core alignment PAS splicers are improved with the new FSM-30S.
This unit has the following features:
- Arc power is optimized automatically by special arc power analysis software.
- Automatic compensation for temperature and humidity variation, as well as for atmospheric pressure/altitude.
- Operating modes provided to create an in-line attenuator
- Mode field diameter compensation program (i.e., to splice Erbium doped fiber to DS.)
- Splicing modes added for cutoff-wavelength-shifted (CS) fiber, in addition to SM, and DS fiber.
- Built-in tube heater is programmable for heating profile and sleeve length
- Menu driven for all functions including maintenance, tube heater programmability and other options.
This unit has the following specifications:
- Fiber Splicing Capabilities: SM @ 1310 nm, DS @ 1550 nm, CS @ 1550 nm, Erbium Doped fiber (Single Fiber)
- Splice Loss: Typical 0.02dB with SM fiber, and 0.05dB with dispersion shifted
- Return Loss: .60dB
- Cleaved Fiber End Angle Alarm: Programmable up to 5�
- Viewing Method: CCD Camera with high resolution 4" LCD monitor with excellent viewability in direct sunlight
- Memory: 100-splice data sets with internal memory
Includes a carrying case and a manual.
See Spec Sheet for Additional Information
