| Specifications
|
| Model | FSM-50R12: Mass fusion splicer up to 12-fiber
FSM-50R8: Mass fusion splicer up to 8-fiber |
| Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T
G.653), NZDS (ITU-T G.655) |
| Fiber Count | FSM-50R12: Single, 2, 4, 5, 6, 8, 10 and 12
FSM-50R8: Single, 2, 4, 5, 6 and 8 |
| Fiber cleaved length | 10mm |
| Actual average splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, and 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC
standards. |
| Splicing time | Typical 20seconds |
| Return loss | >>60dB |
| Splicing modes | 40 user programmable modes and up to 60 modes for
reference (factory predetermined setting). |
| Splice loss estimate | Available |
| Storage of splice result | FSM50R12: The last 400 results to be stored in the internal memory.FSM50R8: The last 500 results to be stored in the internal memory. |
| Fiber display | X / Y, or both X and Y simultaneously. |
| Magnification | FSM-50R12: 35x丂丂FSM-50R8: 49x |
| Viewing method | Two CMOS cameras and 5.6inch color LCD monitor. |
| Operating condition | 0 to 3,660m above sea level, 0 to 95%RH
and -10 to 50 ℃ respectively. |
| Mechanical proof test | 2N |
| Tube heater | Built-in tube heater with 10 heating modes
and up to 20 modes for reference. |
| Tube heating time | Typical 40seconds with FP-04(T), 45seconds
with FP-05 protection sleeves. |
| Applicable protection sleeve length | 60mm and 40mm |
| No.of splice/heating with battery | Typical 70 cycles with BTR-06(S) / Typical 140
cycles with BTR-06(L). |
| Power supply | Auto voltage selection from 100 to 240V AC or 10 to
15V DC with ADC-11, 13.2V DC with BTR-06(S)/(L). |
| Terminals | USB 1.1 (USB-B type) for PC communication.
Video terminal RCA video jack / NTSC. |
| Wind protection | Max. wind velocity of 15m/s. |
| Dimensions | 150W x 150D x 150H (mm) |
| Weight | 2.2 kg (2.7kg including AC adapter ADC-11) |
| Operation languages | 15 type of languages |
