英文版海绵泡沫切割机

GCPQ-100英文版海绵泡沫切割机

参考价: 面议

具体成交价以合同协议为准
2016-10-18 11:13:28
1209
产品属性
关闭
北京冠测精电仪器设备有限公司

北京冠测精电仪器设备有限公司

中级会员11
收藏

组合推荐相似产品

产品简介

本机主要用于泡沫材料的切割,其可将硬质泡沫、软质泡沫、塑料切割成方形、长方形、条形等,具有切割效率高,切割尺寸准确,精确度高等优点。

详细介绍

 

GCPQ-100

海绵泡沫切割机(试验室)

Sponge foam cutting machine (laboratory special-purpose)

一、主要适用范围及功能

One, the main scope and function

本机主要用于泡沫材料的切割,其可将硬质泡沫、软质泡沫、塑料切割成方形、长方形、条形等,具有切割效率高,切割尺寸准确,精确度高等优点

This machine is mainly used for cutting the foam material, it can be hard foam, soft foam, plastic cut into square, rectangular, strip, with high cutting efficiency, cutting size is accurate, the advantage of high precision

二、主要技术要求:

Two, the main technical requirements:

1、切割显示分辨率:0.01mm

The 1, cutting the display resolution: 0.01mm

2、切割尺寸精度:±1mm

2, the cutting precision: ± 1mm

3、工作台尺寸:1000×700mm(可根据用户需要而定)

3, table size: 1000 x 700mm (according to user required)

4、可移动工作台有效行程为 500mm

4, can be effective stroke moving table 500mm

5、zui小切割尺寸:25×25×10mm

5, the minimum cut size: 25 x 25 x 10mm

6、zui大试样厚度:250mm

6, the maximum thickness: 250mm

7、电源电压:220V

7, the power supply voltage: 220V

8、功率: 2.2KW

8, power: 2.2KW

三、结构特点:

Three, structural characteristics:

1、该机配有可移动切料调正尺寸装置。为保证切料尺寸精度,配有数字显示尺。

1, the machine is provided with a movable cutting alignment size device. In order to ensure cutting precision, fitted with digital display ruler.

2、可移动工作台,采用负压吸附方式,固定被切割泡沫。

2, the movable worktable, the negative pressure adsorption, fixed by cutting foam.

3、停止运转时,配有手动、自动装置。

3, stop functioning, with manual, automatic device.

4、红色刹车按钮用于手动刹车。当启动按钮按下时此按钮无效

4, the red brake button for manual brake. When the start button is pressed the button is not available

5、当刹车电磁铁吸合时,按下启动按钮,刹车电磁铁立即释放。

5, when the braking electromagnet, press the start button, immediay release the brake electromagnet.

四、设备主要配置

The main configuration, equipment four

1、试验主机一台

1, test a host

2、控制系统一套

2, a set of control system

3、吸附装置一套

3, an adsorption device

4、数显标尺一个

4, a digital scale

5、驱动电机一个

5, a drive motor

6、切割刀一片(增配一片)

6, the cutting blades (with a)

7、磨刀砂轮片一片

7, grinding wheel piece

8、吸尘装置一套

8, a dust suction device

上一篇:什么是压力传感器 下一篇:煤矿电缆标准
热线电话 在线询价
提示

请选择您要拨打的电话: