2000-SP MAGNEHELIC 压差计在刻度的右侧有一个亮红色LED，显示何时达到设定值。 现场可调，12-24伏直流电。 需要MP或HP边框 
 

Service:Air and non-combustible, compatible gases. (Natural gas option available.)

Wetted Materials:Consult factory.

Housing:Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstａnd 168 hour salt spray corrosion test.

Accuracy:±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00,-60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).

Pressure Limits:35 psig (2.41 bar), HP option: 80 psig (5.52 bar).

Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.

Temperature Limits:20 to 140°F. (-6.67 to 60°C).

Size:4" (101.6 mm) diameter dial face.

Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.

Process Connections:1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.

Weight:1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).

Standard Accessories:Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)

ModelDescription

2000-0-SP Differential pressure gage, range 0-0.50" w.c., with set point indicator.

2001-SP     Differential pressure gage, range 0-1" w.c., with set point indicator.

2002-SP    Differential pressure gage, range 0-2" w.c., with set point indicator.

2005-SP    Differential pressure gage, range 0-5" w.c., with set point indicator.

2010-SP    Differential pressure gage, range 0-10" w.c., with set point indicator.