品牌
经销商厂商性质
青岛市所在地
KDB-II-C加酸法冷凝器
面议KDB-JZ100网格法流量测量装置(矩阵式流量测量)
面议KDB2080超低排放预处理
面议KDB-15加酸型调速型蠕动泵 给水泵离心泵
面议N86ST.16E高温取样泵(不锈钢) 格兰富多级离心泵
面议N86AT.16E高温取样泵(铝合金) 高扬程单级离心泵
面议KDB-B1005蠕动泵 高压喷灌离心泵
面议KDB-B1005A蠕动泵 供应卧式离心泵
面议国产托马斯蠕动泵KDB 工业离心泵
面议托马斯蠕动泵20251352 管道增压离心泵
面议比勒 小型取样泵 P1.1 管道式不锈钢离心泵
面议US-P 2.6-Ex比勒取样泵 单级双吸立式离心泵
面议德国进口取样管线(高温型)-----温度(180-200°C) 品牌:德国PSG
公司历史,产品使用寿命5-10年之久,管线厂家与国外各大系统集成商配套使用。
Rigid lines
· Lengths up to 300 m
· (Depending on the power supply and power rating of the heating cable, up to 165 m with one heating circuit. With multiple supplies for additional heating circuits, the maximum tube bundle length can be extended.
· Rigid lines
· For inside and outside installation
HeatThermal fleece (temperature-resistant up to 200°C)
· Fibreglass fleece (temperature-resistant up to 500°C)
Material
· Kunststoffschutzgeflecht aus Polyamid öl-, benzin-, säure- und lösungsmittelbeständig, halogenfrei, selbstverlöschend und flammwidrig, Dauerbetriebstemperatur = -55°C bis +125°C
· Metallschutzgeflecht aus verzinktem Stahldraht, Dauerbetriebstemperatur = +300°C
Wärmedämmung
· Silikonschaumschlauch temperaturbeständig bis 200°C
Einsatz
· Kurze Längen
· Sehr enge Montageverhältnisse (kleine Biegeradien)
· Feste Verlegung oder Entnahmestellen (Labor/Prüfstand)
· Ohne mechanische Beanspruchung
· Innenmontage
德国混合分配气(用于取样系统) 品牌:德国PSG
More than 1000 types and configurations are produced by PSG.
德国取样探头 品牌:德国PSG
More than 25 years of experience and now all new: the PSG Basic Probe for CEMS.
PSG Probes for continuous emission monitoring
Sampling probes for continuous sampling of gasesThe process gas is tapped using a probe tube and a heated filter unit. These gases need further treatment, since, in most cases, they have an excessively high dust content.The newly developed PSG filter unit is smaller, saves energy and is installation-friendlier.Heating of PTC-Element T=190°C. Ceramic filter with a filter fineness of 0.3 µm. Test gas connection ¼” RT inner thread. Measurement gas connection ¼” RT inner thread.
Optionally, the new PSG filter unit can be supplied with a filter and probe tube back-flushing. The filter unit can be incorporated in a strong stainless steel housing of protection class IP54.The connections of the sampling tube are located right on the housing. The voltage supply and temperature sensor are connected via a terminal box.