品牌
其他厂商性质
上海所在地
The head is available with two different types of integrated lightweight holders (device holder and hａnd xture/positioner) allowing the precise positioning of devices in both touch and tilt positions, aligned to the engraved reference lines. It may be operated in any position when xed with four screws at its base; the base flange serves simultaneously as a pedestal and interface for fixation on any support (a torso version and shoulder mountable flanges are not available).
| Application | Assessment of radiation pattern or total radiated power of mobile phone devices in talk mode in combination with a hａnd phantom or in head only mode |
| Compliance | Fully compliant with CTIA Certification Standard “Test Plan for Wireless Device Over-the-Air Performance” Revisions 3.0 to 3.6 (June 2016) Geometry compliant with SAM data as defined by IEEE SCC34 and 3GPP TR25.914 "Measurements of Radio Performances for UMTS Terminals in Speech Mode" Release 6 |
| Dimensions | Width: 250 mm (w/o phone positioner) |
| Construction | Phantom Shell: high precision injection moulded PP made of low-loss plastic (dielectric constant < 5.0, loss-tangent < 0.05), thickness: 2 ± 0.2 mm, integrated positioning lines, sealed top cap
Gel filling: dielectric parameters compliant with head simulating media as defined by IEEE/IEC and CTIA standards over the entire frequency range (0.3 - 6GHz), volume 5.9 liters (7.2 kg), stable for a minimum of 3 years if kept sealed and in temperature range 22 ± 5 °C
Mounting on a Turntable: 8mm holes in a plane 210mm wide x 174mm deep |
| Frequency Range | 0.3 - 6 GHz |
