*智能光照培养箱是具有恒温、光照和自动调节不同设定温度和光照度功能的高精度冷热恒温设备，是生物遗传工程、医学、林业、环境科学、畜牧、水产等生产和科研部门的理想之选。 

*智能光照培养箱操作说明适用范围： Applicable range                          

GHP型系列智能光照培养箱广泛应用于微生物组织细胞培养、种子发芽、育苗试验、植物栽培以及昆虫、小动物饲养等，能准确模拟不同环境气候条件，是卫生防疫、院校、实验室、环境保护、农林畜牧业等科研单位，从事生产科研作恒温、光照实验培养的装置。

GHP series inligent lighting incubator is widely used for cell culture of microorganism organization, seed germination, raising of seeding, plant c*tion, insect and kitten breeding, it can accuray simulate the different environment climate conditions, serving as the constant temperature and humidity illumination incubator in various scientific research departments such as hygiene and disease control, academy, laboratory, environmental protection, farm livestock, etc..

产品特点Features：

※采用微电脑液晶程序控制温度、光照，控制稳定准确。

Microcomputer controls the temperature and humidity, with stable and accurate control;

※温度可随光照的有无实行昼夜不同的设定。

The day and night temperature is settable depending on the illumination;

※独立限温报警系统，超过限制温度即自动中断，保证实验安全运行不发生意外（选配）。

Through an independent temperature-limit alarming system （optional）, the incubator can cut off the power automatically if beyond the limiting temperature, to guarantee the safety run of experiment and prevent the accident;

※*风道循环系统，确保工作室内部风力分布均匀，不会吹到植物幼苗。

Unique air circulating system ensures uniform distribution of air in the working chamber, not blow down the seedling;

※采用镜面不锈钢内胆，四角半圆弧易清洁。

Adopting internal bladder of finished stainless steel as well as four semi-circular corners, easy for cleaning; 

※压缩机、循环风机等关键零部件均采用品牌产品，具有安全可靠特点。

The key parts such as compressor and circulating blower are imported, very safe and reliable.

※升级型智能化可编程光照培养箱，具有大屏幕液晶显示控制器，除以上功能外，外型更新颖，控温、光照度更精确、保护，更完善，并可配RS-485接口，可连接打印机和计算机，记录温度参数的变化情况（选配）。

The upgraded type inligent programmable lighting incubator has large-screen LCD controller, featured with nice appearance, temperature control, higher lighting precision, more perfect protection besides above-mentioned functions, what’s more, they may be equipped with RS-485 interface （optional） that can connect with printer and computer to record the change of temperature parameters.

*智能光照培养箱操作说明

1 打开电源开关，此时循环指示灯亮，电机运转，智能型控制器PV屏显示工作室内测量温度，SV屏显示要使用的设定温度。  

2 设定温度：按SET键一次，此 时PV屏显示“SP”字符，SV屏*位闪烁，用循环选取SV屏显示的闪烁的 具体位置，用或改变原SV屏显示的温度值，至需要值为止。设定完毕，再按SET键一次，温度设定结束。  

3 设定温度高于环境温度5℃时，请选择”RT+5℃”档；设定温度低于环境温度5℃或接近于环境温度时，请选择“自动”档。  

4 放置物品：把需要培养的物品放入培养箱工作室内，上、下四周应留存一定空间保持工作室内气流畅通，关好箱门。   

*智能光照培养箱操作说明技术参数：Technical parameters：