LV 转子 cP(mPa•s) | | |
SPINDLE | RANGE* | | |
LV-1 (61) | 15 - 20K | | |
LV-2 (62) | 50 - 100K | | |
LV-3 (63) | 200 - 400K | | |
LV-4 (64) | 1K - 2M | | |
| | |
LV-5 (65) | 2K - 4M LV-5 是选配转子，用于扩展量程. | | |
LV-2C | 50 - 100K | | |
LV-3C | 200 - 400K | | |
* Based on Standard LV speeds .3 - 60 rpm | M = 1 million K = 1 thousand | | |
Note: LV-1 through LV-4 are supplied with LV instruments. | | | |
LV-2C & LV-3C are optional “cylindrical spindles” offering geometry for calculating shear rates. | | |
LV and RV/HA/HB spindles are supplied in 302 stainless steel. | | | |
Optional 316 stainless or teflon coated spindles are available | | | |
| | | | | | |
RV/HA/HB 转子 cP(mPa•s) | | |
SPINDLE | RANGE* | RANGE* | RANGE* | | |
RV SERIES | HA SERIES | HB SERIES | | |
RV-1** | 100 - 20K | 200 - 40K | 800 - 160K | | |
HA/HB-1** | 100 - 20K | 200 - 40K | 800 - 160K | | |
RV-2 | 100 - 80K | 200 - 160K | 800 - 640K | | |
HA/HB-2 | 100 - 80K | 200 - 160K | 800 - 640K | | |
RV/HA/HB-3 | 100 - 200K | 200 - 400K | 800 - 1.6M | | |
RV/HA/HB-4 | 200 - 400K | 400 - 800K | 1.6K - 3.2M | | |
RV/HA/HB-5 | 400 - 800K | 800 - 1.6M | 3.2K - 6.4M | | |
RV/HA/HB-6 | 1K - 2M | 2K - 4M | 8K - 16M | | |
RV/HA/HB-7 | 4K - 8M | 8K - 16M | 32K - 64M | | |
* Based on standard RV/HA/HB speeds .5-100 RPM. | M = 1 million K = 1 thousand | | |
Note: LV and RV/HA/HB spindles are supplied in 302 stainless steel. | | | |
Optional 316 stainless or teflon coated spindles are available | | | |
** This spindle available as an option | | | | |
| | | | | | |
Wells/Brookfield Spindles & Cups | | | | |
Wells/Brookfield 转子和样品杯 | |
SPINDLE | SHEAR | SAMPLE | CONE | CONE | |
RATE | VOLUME | ANGLE | RADIUS | |
CPA-40Z | 7.50N sec-1 | .5mL | .8° | 2.4cm | |
CPA-41Z | 2.00N sec-1 | 2.0mL | 3° | 2.4cm | |
CPA-42Z | 3.84N sec-1 | 1.0mL | 1.5° | 2.4cm | |
CPA-51Z | 3.84N sec-1 | .5mL | 1.5° | 1.2cm | |
CPA-52Z | 2.00N sec-1 | .5mL | 3° | 1.2cm | |
CUP | |
CPA-44YZ | Standard cup without temperature probe | |
CPA-44PYZ | Standard cup with RTD temperature probe | |
PCPA-3YZ | Cup with 1 purge fitting | |
PCPA-6YZ | Cup with luer fitting and 1 purge fitting | |
PCPA-4YZ | Cup with luer fitting and 2 purge fittings | |
PCPA-7YZ | Cup with luer fitting and 4 purge fittings | |
Note: 1. Wells-Brookfield cones and cups are calibrated at the factory. | | | | |
Cones ordered after shipment require cups to be returned for calibration to new cone. | | | |
2. CPA cups and spindles are compatible with CPE cups and spindles | | | | |
3. See page 18 for viscosity ranges | | | | |
| | | | | | |
UL 转子和样品杯 |
SPINDLE | TYPE | | | SAMPLE | SHEAR |
| | VOLUME | RATE |
YULA-15(E) | Spindle - 304 stainless steel | | 1.224N |
YULA-15(E)Z | Spindle - 316 stainless steel | | 1.224N |
ULA-31(E)Y | Sample Chamber - 304 stainless steel | 16mL | |
ULA-31(E)YZ | Sample Chamber - 316 stainless steel | 16mL | |
Note: 1. See page 41 for viscosity ranges | | | | N = rpm |
2. (E) represents enhanced UL version (introduced Jan. 2006) | | |
| | | | | | |
DIN 转子 | | |
SPINDLE | SHEAR | SAMPLE | | |
RATE | VOLUME | | |
ULA-DIN-85 | | 1.29N | 17.0mL | | |
ULA-DIN-86 | | 1.29N | 6.5mL | | |
ULA-DIN-87 | | 1.29N | 2.0mL | | |
HT-DIN-81 for Thermosel | 1.29N | 7.0mL | | |
SC4-DIN-82 for SSA | 1.29N | 1.5mL | | |
SC4-DIN-83 for SSA | 1.29N | 1.5mL | | |
CHAMBER | | |
ULA-DIN-6Y | for use with ULA-DIN-86 and 87 | | |
DAA-1 | for use with ULA-DIN-85 | | |
| | | | | | |
| | | | | | |
RST 转子 | |
SPINDLE | VISCOSITY | SHEAR | MAX. SHEAR | SAMPLE | |
RANGE | RATE | STRESS | VOLUME | |
COAXIAL | Pa•s | sec-1 | Pa | mL | |
CCT-DG | 0.00005-4.07K | 0.043-5.64K | 177 | 15.7 | |
CCT-40 | 0.0003-27.6K | 0.0215-2.79K | 594 | 68.5 | |
CCT-25 | 0.002-177K | 0.013-1.67K | 2.28K | 16.8 | |
CCT-14 | 0.012-1M | 0.013-1.68K | 13K | 3.4 | |
CCT-8 | 0.065-5.41M | 0.013-1.672K | 69.6K | 1 | |
CONE | | | | | |
RCT-25-1 | 0.005-407K | 0.06-7.8K | 24.4K | 0.1 | |
RCT-25-2 | 0.01-814K | 0.03-3.9K | 24.4K | 0.2 | |
RCT-50-1 | 0.0006-50.9K | 0.06-7.8K | 3.05K | 1 | |
RCT-50-2 | 0.0012-101K | 0.03-3.9K | 3.05K | 2 | |
RCT-75-1* | 0.0002-15K | 0.06-7.8K | 905 | 2.5 | |
RCT-75-2* | 0.0004-30K | 0.03-3.9K | 905 | 5 | |
PLATE | |
RPT-25 | 0.03-2.49M | 0.013-1.7K | 32.6K | 0.5 | |
RPT-50 | 0.002-155K | 0.027-3.4K | 4.07K | 2 | |
RPT-75* | 0.0004-30.7K | 0.04-5.1K | 1.2K | 4.5 | |
*For use with water bath version only | 1 Pa•s = 1,000 cP K = 1 thousand | M = 1 million | |
Note: Values based on minimum speed of 1 RPM and maximum speed of 1000 RPM | |
| | | | | | |
RST 浆式转子 | | |
SPINDLE | VANE | VANE | SHEAR | | |
LENGTH | DIAMETER | STRESS | | |
| mm | mm | Pa | | |
VT-10-5 | 10 | 5 | 330-210K | | |
VT-20-10 | 20 | 10 | 41-27K | | |
VT-20-20 | 20 | 20 | 9-5.9K | | |
VT-30-15 | 30 | 15 | 12-8K | | |
VT-40-20 | 40 | 20 | 5.2-3.4K | | |
VT-40-40 | 40 | 40 | 1.2-740 | | |
VT-50-25 | 50 | 25 | 2.7-1.7K | | |
VT-60-8 | 60 | 8 | 24-15K | | |
VT-60-15 | 60 | 15 | 7-4.3K | | |
VT-60-30 | 60 | 30 | 1.6-1K | | |
VT-80-40 | 80 | 40 | 0.7-420 | | |
VT-80-70 | 80 | 70 | 0.2-120 | | |
Values based on minimum speed of 1 RPM and maximum speed of 1000 RPM | K = 1 thousand | | |
| | | | | | |
Thermosel 转子和样品杯 | Link hanging configuration is standard | | | |
SPINDLE | SHEAR | SAMPLE | | | |
RATE | VOLUME | | | |
SC4-18 | 1.32N | 8.0mL | | | |
SC4-31 | .34N | 10.0mL | | | |
SC4-34 | .28N | 9.5mL | | | |
SC4-21 | .93N | 8.0mL | | | |
SC4-27** | .34N | 10.5mL | | | |
SC4-28 | .28N | 11.5mL | | | |
SC4-29 | .25N | 13.0mL | | | |
HT-DIN-81 | 1.29N | 7.0mL | | | |
*SC4-XXBS = Solid Shaft. Not available for SC4-18 and SC4-21 spindles | | | |
**Also available as SC4-27D-100 = Disposable spindle, 100 units | | | |
CHAMBER | TYPE | | | | |
HT-2 | Sample Chamber - Reuseable, stainless steel | | | |
HT-2DB-100 | Sample Chamber - Disposable, aluminum, 100 units | | | |
| | | | | | |
| | | | | | |
小量样品适配器SSA转子和样品杯 | | |
SPINDLE | SHEAR | SAMPLE | | |
RATE | VOLUME | | |
SC4-18 | 1.32N | 6.7 mL | | |
SC4-31 | 0.34N | 9.0 mL | | |
SC4-34 | 0.28N | 9.4 mL | | |
SC4-16 | 0.29N | 4.2 mL | | |
SC4-25Z (316 s/s only) | 0.22N | 16.1 mL | | |
SC4-21† | 0.93N | 7.1 mL | | |
SC4-27*† | 0.34N | 10.4 mL | | |
SC4-15 | 0.48N | 3.8 mL | | |
SC4-28 | 0.28N | 11.0 mL | | |
SC4-29 | 0.25N | 13.5 mL | | |
SC4-14 | 0.40N | 2.1 mL | | |
SC4-DIN-82 | 1.29N | 1.5 mL | | |
SC4-DIN-83 | 1.29N | 1.5 mL | | |
CHAMBER | TYPE | | |
SC4-13R | Sample Chamber w/o temperature probe | | |
SC4-13RPY | Sample Chamber w/RTD temperature probe & cable | | |
SC4-8R | Sample Chamber w/o temperature probe | | |
SC4-8RPY | Sample Chamber w/RTD temperature probe & cable | | |
SC4-7R | Sample Chamber w/o temperature probe | | |
SC4-7RPY | Sample Chamber w/RTD temperature probe & cable | | |
SC4-6R | Sample Chamber w/o temperature probe | | |
SC4-6RPY | Sample Chamber w/RTD temperature probe & cable | | |
SC4-13RD-100‡ | Sample Chamber - Disposable, aluminum, 100 units | | |
Note: See page 39 for spindle/chamber ranges ‡ Requires the use of special water jacket SC4-45YD * Also available as SC4-27D-100 = Disposable spindle, 100 units | |
† Solid shaft option available for spindles SC4-21 (Part No. SC4-21SD) and SC4-27 (Part No. SC4-27SD). | | | |
| | | | | | |
KU-2 Spindles | | | | | |
SPINDLE | TYPE | | | | |
KU1-10 | Standard Krebs Spindle | | | | |
KU1-75Y | Optional Paste Spindle | | | | |
| | | | | | |
T-Bar 转子 cP(mPa•s) | |
SPINDLE LV | | RV | HA | HB | |
T-A | 156 - 62.5K | 2K - 400K | 4K - 800K | 16K - 3.2M | |
T-B | 312 - 124.8K | 4K - 800K | 8K - 6M | 24K - 6.4M | |
T-C | 780 - 312K | 10K-2M | 20K-4M | 80K - 16M | |
T-D | 1.5K - 624K | 20K-4M | 40K-8M | 160K - 32M | |
T-E | 3.9K - 1.5M | 50K - 10M | 100K-20M | 400K - 80M | |
T-F | 7.8K - 3.1M | 100K-20M | 200K-40M | 800K - 160M | |
M = 1 million K = 1 thousand | | | | | |
| | | | | | |
螺旋适配器转子 | | | | |
SPINDLE | CHAMBER | | | | |
SA-70 | SA-1Y | | | | |
| | | | | | |
浆式转子 | | | |
SPINDLE | VANE | VANE | | | |
LENGTH (in) | DIAMETER (in) | | | |
V-71 | 2.708 | 1.354 | | | |
V-72 | 1.706 | 0.853 | | | |
V-73 | 0.998 | 0.499 | | | |
V-74 | 0.463 | 0.232 | | | |
V-75 | 0.632 | 0.316 | | | |
Note: Container diameter should be twice (2x) the vane diameter when possible. See page 43 for ranges. |
