Teledyne INSTA TRACE Micro-fuel Cell Oxygen Sensor
品牌
其他厂商性质
深圳市所在地
深圳市大成机电技术有限公司
组合推荐相似产品
德国E+H通用型电导率测量变送器CLM223-CD0005
E+H余氯分析仪传感器CCS140
COS61-A1F0 E+H溶解氧分析仪传感器
德国E+H 溶解氧探头传感器电极COS61D-AAA1A3
E+H音叉开关FTL31-AA4U2AAWBJ音叉物位计
BALLUFF巴鲁夫倾斜传感器
BALLUFF巴鲁夫用于液位测量的磁致伸缩线性位置测量系统
BALLUFF巴鲁夫磁致伸缩传感器
E+H恩德斯豪斯PH数字电极CPS11D-7AA21
BALLUFF巴鲁夫杆型的磁致伸缩线性位置测量系统
E+H恩德斯豪斯音叉限位开关FTL81
BALLUFF巴鲁夫感应式传感器
(209,000 ppm O2).
• No waiting • No diverting product • No switching analyzers • No liquid backup
During this transition from an oxygen free environment to open air exposure, the sensorʼs electrolyte becomes saturated with dissolved oxygen – and the longer the exposure, the longer the recovery time. The typical recovery period when replacing a sensor is between 6 to 24 hours. The INSTA TRACE Micro-fuel Cell oxygen sensor is capable of measuring below 1 ppm of oxygen within 15 minutes of installation. By reducing the recovery period from several hours to just minutes, users will no longer have to divert unanalyzed product, go to liquid back-up (in the case of the air separation industry), or switch analyzers. The intrinsic value of this innovation has extreme significance in plant operation.
Using Teledyneʼs Insta Trace technology, meaningful readings below 1 ppm are obtained in only 15 minutes.
HOW IT’S DONE The solution Teledyne engineered to address this recovery concern is simple yet extremely effective. By covering the base of the sensor with a seal, the cell is protected from exposure to ambient air. Insertion in the newly designed cell holder rests the INSTA TRACE sensor against a prong. As the cell holder is closed, the prong punctures the seal thereby allowing the fl ow of gas to the cathode to begin in a controlled setting. The new cell holder is designed to ensure the prong will not come in contact with the actual reactive sensing surface of the sensor.
WHERE INSTA TRACE CAN BE APPLIED Teledyne can retrofi t INSTA TRACE sensing capability into all of its Micro-fuel Cell based trace oxygen analyzers currently in service. The retrofi t kit contains the cell holder in addition to the INSTA TRACE sensor. Simply replace the old cell holder (the bottom piece that either threads or mechanically clamps to the cell block assembly) and install the INSTA TRACE sensor. Take advantage of this innovation by ordering the appropriate retrofi t kit.
首页
展台
留言
收藏
联系方式
仪表网采购电话
