BODE100频率响应分析仪
BODE100网络分析仪,Bode100频率响应分析仪,Bode100环路分析仪
| Characteristic | Rating |
| Wave form: | Sinusoidal signal |
| Frequency range | 10 Hz to 40 MHz (standard frequency range)*
1 Hz to 40 MHz (extended frequency range)*
*frequency ranges software switchable |
| Signal Level | -27dBm to 13dBm
0.01VRMS to 1VRMS (at 50 Ohm load) |
| Accuracy of the source level (23°C +/-5°C) | +/-0.3 dB (1Hz to 1MHz)
+/-0.6 dB (1MHz to 40 MHz) |
| Frequency response of the source level 1Hz to 40MHz | +/-0.3dB (referred to 100kHz) |
| Frequency accuracy (23°C +/-5°C) | +/-15ppm (<1 year after calibration)
+/-25ppm (<3 years after calibration) |
| Source impedance: | 50 Ohm |
| Return loss (1Hz to 40MHz) | > 28dB (VSWR < 1.09) |
| Spurious signals | < -55dBc (typical) |
| Harmonics | < -55dBc (typical) |
| Connector: | BNC
| Inputs: CH1, CH2 | | Input Impedance (high): | 1MOhm +/-2% (by design) | | Input capacitance: | 40 to 55pF | | Input Impedance (low): | 50 Ohm | | Return loss for low input impedance (1Hz to 40MHz) | > 25dB (VSWR < 1.12) | Noise floor for the gain measurement Conditions:
Resolution bandwidth = 10Hz, select internal reference,
PSOURCE = 13dBm, 50O load at CH2, 20dB attenuators for
CH1 and CH2 | 1Hz to 5kHz: -100dB (typical)
5kHz to 50kHz: -110dB (typical)
50kHz to 20MHz: -115dB (typical)
20MHz to 40MHz: -110dB (typical) | | Connectors | BNC | | Receiver bandwidth: | 1Hz to 3kHz | | Input attenuator: | 0 dB, 10 dB, 20 dB, 30 dB, 40 dB | | Input sensitivity: | 100 mV full scale (for input attenuator 0 dB) | | Dynamic range: | > 100 dB (at 10 Hz receiver bandwidth) | | Gain error: | < 0.1 dB (calibrated) | | Phase error: | < 0.5º (calibrated)
| |
