品牌
其他厂商性质
北京市所在地
Wazau摩擦磨损试验机TRM5000
面议Wazau-SVT500-1000线性往复运动的摩擦学测试机
面议Wazau-UTM5000
面议Wazau-UTM2000
面议Wazau-UTM100
面议Wazau摩擦磨损试验机TRM2000
面议Wazau摩擦磨损试验机TRM1000
面议Wazau摩擦磨损试验机TRM500
面议wazau-APG 耐磨耗测试仪 SN 27650
面议wazau RPG摩擦系数测试仪 DIN EN ISO 8295
面议CHD织物热传导测试仪 DIN EN ISO 12127-1
面议KKO/KFN/LHP划痕测试仪BMW EK341
面议The PAMAS 4132 is used as a particle counting system for Single & Multipass Filter test rigs. The standard system fits in the test rigs of filter manufacturers.
In case of a Single Pass Filter Test, the liquid passes the filter only once and then is deviated to the outflow. For ß-ratio-analyses, the Single Pass Filter Test can be performed with two PAMAS 4132 instruments.
Two PAMAS 4132 instruments - equipped with 32 size channels each - are also used for the Multipass Filter Test. This test rig with two particle counters allows simultaneous upstream and downstream measurements. For the Multipass Filter Test, the liquid flows continuously through the system.
The particle counting system PAMAS 4132 analyses liquids of various viscosity degrees (e.g. oil, fuel, water, etc.). The system is adaptable to any Multipass application and ß-ratio analysis.
PAMAS HCB-LD-50/50
Calibration range:
1 - 400 μm according to ISO 21501
1 - 100 μm according to ISO 4402
4 - 70 μm(c) according to ISO 11171
Max. particle concentration: 24,000 p/ml at a flow rate of 25 ml/min
PAMAS HCB-LD-25/25
Calibration range:
1 - 200 μm according to ISO 21501
1 - 100 μm according to ISO 4402
4 - 70 μm(c) according to ISO 11171
Max. particle concentration: 120,000 p/ml at a flow rate of 25 ml/min