Inlet Connection:
G1 1/2"Outlet Connection:
G1 1/2"Maximum Working Pressure - psig:
580Outlet Pressure Range - psi:
0 to 184Set pressure range psi:
0 to 184Nominal bore - mm:
25Medium:
C02
品牌
其他厂商性质
所在地
Whilst holding a strong position in the Industrial Gas, Alternative Fuels, Offshore Oil & Gas and Power Generation markets, we are also well established in a number of OEM applications.
A summary of these is;
PET Blow Moulding - Spring & Dome Loaded Pressure Regulators.
Medical Gases Automatic Changeover Units.
UPS - Uninteruptable Power Supply control modules.
Laboratory Gas Supply Systems.
Automative Exhaus Gas analysis Systems.
A comprehensive range of Stainless Steel (N.A.C.E) precision logic and high pressure spring loaded pressure regulators including the following standard features;
Our range of applications is vast. 
When requiring either standard catalogue valves, application specific or packaged solutions, where the pressure reduction, isolation or switching of high pressure compressed gases and liquids is required, you can feel sure that Hale Hamilton will be your ideal partner.
Hale Hamilton's standard NR & NRS ranges of in-line non-return valves feature a mitre seat with o ring insert to ensure a leak-tight shut-off with an efficient flow path. The valves are but lightly spring loaded to enable positive operation at any angle of installation.
Available in either hard or soft seat, this range of non-return valves has been developed for use within high pressure gas & liquid applications. Adiabatically shock tested variants are available to EN ISO 7291.
Series NR are a range of hard seated valves available in orifice diameters of 12 & 16mm, with port connections ranging from G5/8" to G1 1/4". Body materials of Brass, Aluminium Bronze, Stainles Steel, Monel & Inconel with a maximum working pressure of 400bar.
Hale Hamilton offer filtration through wire mesh, sintered bronze, or stainless steel wire (wound on a brass former), in both in-line and Y-shape housings (cartridge insert type), for use within a broad range of applications and markets.
The range of high pressure filters is suitable for a broad range of applications with operating pressures up to 414 bar (6,000psi) and is offered with port connections ranging from 1/4" BSP to 2" BSP.
Adiabatically Shock tetsed variants to EN ISO 7291 are also available.
Series F100 is a range of filters for use with gases or liquids in high pressure systems. A wide variety of stop valves, suitable for working pressures from zero up to 414 bag (6,000psi) are available. Most Hale Hamilton stop valves are fully pressure balanced and thus require a very small operating torque, even at the highest pressures. Many valves in the range are suitable for both pneumatic and hydraulic applications.
Available in a variety of materials, the Hale Hamilton range of valves are used within many applications including; Military Markets, Gas Filling, Mixing and Supply, Power Generation, Off-Shore, Pharmaceutical, Medical, Compressor, Laboratory and many other Industrial markets.
Many products carry; NATO, BAM, CTE, PED and TPED approvals.
Series SV47, 60 & 130 area range of Manually actuated high presure stop valves available in 6, 12, 16 & 20mm orifice diameters, G1/4 to 2 5/16 -12 UNF port connections & cartridge mounted with operating pressures up to 420 bar and body materials of Nickel Aluminium Bronze, Brass or Stainless Steel.
N Series are a range of fully Balanced, Manually actuated, high pressure stop valves available in 6, 11, 19 & 25mm orifice diameters, G1/4" to G1 1/2" threaded connections, welded inline and flange mounted with operating pressures to 414 bar, CV values from 0.8 to 11 and body materials of Nickel Aluminium Bronze, Brass or Stainless Steel.
A comprehensive range of Stainless Steel (N.A.C.E) precision logic and high pressure spring loaded pressure regulators including the following standard features;
The Hale Hamilton range of pressure relief valves are suitable for use within a wide range of inert, flammable and corrosive gases, many of which are approved to PED cat 1V.
Available in a variety of materials, the Hale Hamilton range of valves are used within many applications including: Military Markets, Gas Filling, Mixing and Supply, CNG Filling and Supply Systems, Power Generation, Off-Shore, Pharmaceutical, Medical, Compressor, Laboratory and many other Industrial markets.
Pressures from as low as 0.03 barg (0.45psi ) up to pressures in excess of 550 barg ( 8,000psi ) are accommodated by our range of relief valves, available in a choice of different materials to suit the operating medium.
Series RS Differential Relief Valves are available as Body Ported, Banjo Mounted in G3/8" or Cartri
dge Mounted for manfold applications in Brass, Nickel Aluminium Bronze or Stainless Steel. Set pressures range from 3.5 to 350bar with an orifice diameter of 9.5mm. Adiabatically Shock tested to EN ISO 7292 are available.
Series RVA Differential Relief Valves are inline, body ported, available in Brass & Nickel Aluminium Bronze. Set pressures range from 1 to 448bar with orifice diameters from 6 to 19mm and port connections from G3/4" to G1". Adiabatically Shock tested to EN ISO 7292 are available.
Series LPR are a range of Low Pressure body ported Relief Valve available in Brass, Nickel Aluminium Bronze & Aluminium. Set pressures range from 0.03 to 4bar with an orifice diameter of 8mm and port connections of G1/4" & G3/82.