美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪-东莞市塘厦精工仪器厂手机版

详细介绍

美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪

	名称：	美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪
	型号：	P-C-7300 Bond Test MK III
	厂家：	美国NDT JAMES
	用途：	可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。

详细介绍：

美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。

The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. By pulling a 25mm steel disk attached to the material under the unit can,

Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
Determine the bond strength of a repair or overlay material after it is applied to the substrate
Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface

The James Bond Tester™ MK III has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.

Purchasing Notes

Each System comes with 10, 50mm 2 inch, ASTM Standard 1583 - 04 stainless steel disks
Customers who purchase this may also need the T-M-170 Moisture Master or T-HT-1000 Humitest for substrate moisture testing

Features and Benefits

· Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.

· Calibrated gauge with maximum load indicator and mechanical damping.

· Ball Joint Design for rapid testing as well as assuring direct tensile loading

· Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.

· Compact design.

· Easy to use.

· Standards

o ISO 4624 Paints and varnishes -- Pull-off test for adhesion

o EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate

o EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives

o BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests

o ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

o ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

o ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes

o DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)

Specifications:

Gauge Specifications
Range	Increments	Maximum Load Indicator	Mechanical Dampened Movement	Diameter
0 - 5 KN / 0 - 1100 lbf	0.2 KN / 50 lbf	Yes	Yes	70 mm / 2.5"
0 - 20 KN / 0 - 4450 lbf	1.0 KN / 200 lbf	Yes	Yes	70 mm / 2.5"

Alignment Plate
Diameter	Horizontal and Vertical Level	Easy Thumb Screw Adjustment Knobs
150 mm / 6"	Yes	Yes

Bond Test Puller Assembly
Diameter	Height	Maximum Load
60 mm / 2.5"	210mm / 8.125"	30 KN / 6675 lbf

Bond Test Assembly (Alignment Plate Attached to Bond Test Puller Assembly)
Height	Width	Weight
240 mm / 9.375"	3010 mm / 12.5"	5 Kg / 11 lbs.

James Bond Tester™ MK III in Case
Height	Width	Depth	Weight
410mm / 16"	508mm / 20"	205mm / 8"	14 Kg / 31 lbs

以上是美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪

美国NDT James相关产品介绍：
美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪
美国NDT James T-C-10 T-C-20 Cementometer微波水泥含水率测试仪
美国NDT James T-S-30 Aquaprobe微波土壤含水率测试仪
美国NDT James T-M-170 Aquameter混凝土含水率测试仪
美国NDT James T-T-90 Trident插针式微波骨料含水率测试仪
美国NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸碱指示剂
美国NDT James I-AS-3000 ASR-Detect混凝土碱骨料反应测试仪
美国NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含气量测试仪
美国NDT JAMES Z-WP-1000 Windsor Probe混凝土强度枪击检测仪
美国NDT JAMES W-P-2000 Windsor Pin混凝土强度检测仪
美国NDT JAMES R-HR-8000 Mini R-Meter钢筋定位仪
美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪
美国NDT JAMES P-C-728 P-C-729 Anchor锚栓测试仪
美国NDT JAMES M-M-3056 Maturity Meter混凝土成熟度测试仪
美国NDT JAMES Datascan MK II钢筋混凝****达
美国NDT James C-P-6000 C-P-6050 Porosiscope混凝土渗气渗水性测试仪
美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪
美国NDT James C-CL-3000 Chlorimeter混凝土氯离子含量测定仪
美国NDT James W-M-350 W-M-250 Rebound Hamme机械回弹仪
美国NDT James W-D-2000 Rebound Hamme数字回弹仪
美国NDT James V-E-1000 E-Meter MK II动态弹性模量测试仪
美国NDT James V-V-100 Vu-Con冲击回波测试仪
美国NDT JAMES V-C-400 V-Meter MK IV混凝土超声波测试仪
美国NDT James C-CS-8000 C-CS-8300 Gecor 8钢筋锈蚀程度测定仪
美国NDT James C-RM-8000 Ohmcorr混凝土电阻率测定仪
美国NDT James C-CM-5000 Cor-Map II大屏幕半电池电压钢筋锈蚀检测仪
美国NDT JAMES R-C-400/450/475/410 Rebarscope钢筋扫描仪

产品简介

详细介绍

Features and Benefits