详细介绍

美国controller数显微差压变送器865系列

Series 865 Pressure Transducer with Display

865

Specifications

Accuracy*:	<+/-1.0% FSO
Stability:	+/-0.5% FSO/yr
Thermal Effects:	+/-0.075%/°C
Overpressure:	1-10”WC = 100”WC 11-20”WC = 10x rated pressure 21-30”WC = 5x rated pressure Over 30”WC = 45 PSI
FSO Pressure Range:	0/0.25”WC up to 0/15PSI (bi-directional ranges available)
Compensated Range:	10° to 50°C
Media:	Non-corrosive, non-ionic gases
Operating Humidity:	90% RH non-condensing
Operating Temp:	-25° to 70°C
Input Supply**:	12-24 VDC/24VAC
Supply Current:	<30mA
Load Resistance:	2KΩ minimum on voltage out, 250Ωmaximum loop resistance on 4-20mA output (500Ω max loop resistance available upon request**)
Output Signal:	1-5VDC, 1-6VDC, 1-10VDC or 4-20mA* (call for custom outputs)
Circuit Protection:	Output limited and reverse voltage protected
Electrical Connections:	Pluggable Screw Terminal Block
Pressure Connections:	Barbed fitting for 1/8” ID tubing
Enclosure:	Impact resistant ABS plastic
Dimensions:	Approx. 3.5” x 2.7” x 1.4” (8.7cm x 6.8cm x 3.5cm)

* Includes non-linearity hysteresis and non-repeatability at a fixed temperature
** An input of 18-24VDC/AC is required to drive a 500Ω load; the same input is also required for a 1-10VDC output
*** 3-wire 4-20mA

Package Drawing

CLICK TO ENLARGE

How to Order

A typical order number consists of the model number, pressure range, pressure unit, output and mounting connection.

Model	Type	Output Signal	FSO Pressure Range	Calibration Pressure
865	D = Differential or Gage*	0…..1 to 5 volts	0…..0.25″WC to 5″WC	Customer designated exact FSO
		1…..1 to 6 volts	1…..>5″WC to 13″WC
		2…..1 to 10 volts**	2…..>0.5PSI to 1PSI
		3…..4-20mA (250Ω load)	3…..>1PSI to 5PSI
		4…..4-20mA (500Ω load)**	4…..>5PSI to 15PSI
		5…..Custom Output

Example: 865D-01 Cal Pressure = 6” WC. “Pressure Range” is not a specific number. Please indicate exact calibration pressure. (This unit has an output of 1-5 VDC and will be calibrated to 6” WC.) If a custom output is needed, the exact output must be specified.

* With a gage application, one of the two ports is vented to atmosphere
** With a 1-10 VDC output as well as with a 4-20mA output that needs to drive a 500Ω load a 18-24
VDC/24VAC input is required.

Features and Applications

Easy to read display (0.38” height)
Available in pressure ranges from 0/0.25”WC up to 0/15PSI
Output stability of 0.5% FSO
Perfect for a variety of air and inert gas applications such as duct static, VAV and fan control
Easy wiring via a pluggable screw terminal block
Pressure range calibrated to customer’s specific requirement
Able to handle high overpressure
Internally conditioned allowing it to automatically accept unregulated 12- 24 VDC or 24 VAC power
Reverse Voltage Protection