It is very important to maintain the electric actuators

    长期以来，国内的大多数行业是以新换旧，把换下的电动执行器当废品扔掉或卖掉.特别是多用带法兰盘电动执行器的行业.而对换下的高压、高温、大型阀门电动执行器想修，但不知道怎样修。多数还停留在手工修理阶段。可以说中国的执行器维修业中，浪费与可获得的效益都是巨大的。某电站(4x5omw~4x2oomw)每年要修上万个汽机执行器和旁路执行器。电厂只有1台1992年从德国进el的研磨机，其余都是手工操作，不仅效率低下，而且精度达不到要求。而旁路高压减压阀泄漏，电厂却无法修理.送到上海维修效果也不理想。近的几年，随着各个单位逐渐开始独立经济核算，降低成本，从管理人员到一线的维修工人都逐渐的意识到了维修电动执行器的重要性，因为这方面所能节省的资金是极为可观的。然而这里的修电动执行器并不是指简简单单的修理，还要包括采用正确的修理方法和优良的研磨修复设备。

    For a long time, most of the domestic industries are replacing old ones with new ones and discarding or selling the replaced electric actuators as waste products. In particular, industries that use electric actuators with flanges are often used, they want to repair the replaced high pressure, high temperature and big electric actuators, but they have no idea about it. Most of them still remain in the manual repair stage. It can be said that waste and available benefits are huge in China's electric actuator maintenance industry. A power station (4x5omw~4x2oomw) has to repair tens of thousands of turbine electric actuator and bypass electric actuator each year. The power plant has only one grinding machine imported from Germany in 1992. The rest are all manual operations, which are not only inefficient but also less accurate. The leakage of the bypass high pressure relief valve can’t be repaired by the power plant. The result of the repair in Shanghai is also not satisfactory. In recent years, as individual units gradually began to conduct independent economic accounting and reduce costs, managers and first-line maintenance workers gradually realized the importance of repairing electric actuators because the money saved in this area are extremely impressive. However, the repair of electric actuators here does not mean simple repairs, but also includes the use of proper repair methods and good grinding repair equipment.

    由于对电动执行器维修和检修的观念和设备缺乏，目前在国内只有核电站能够基本做到在每次停机检修期间对所有的电动执行器都进行检修。坏了再修是一种无保养性维修，这对于全套设备的安全运转和执行器的使用寿命都是极为不利的，其潜在的紧急停机事故的危险性极大，由此造成的损失也是巨大的。例如：天津某石化有1套从德国全套进口的生产装置，自1981年投产至1996年从来没有进行过检修，1996年当时发现有几个关键的填料阀泄漏，而德国厂家已经不再生产这种特种设备了，若重新订货.不仅价格高昂，而且供货期很长，带来的经济损失巨大。所以说，工业高温高压执行器的预防性保养和维修措施，是解决执行器泄漏和延长使用寿命中经济和可靠的途径。

    Due to the lack of ideas and equipment for maintenance and repair of electric actuators, only nuclear power plants in China can basically perform maintenance on all electric actuators during each shutdown period. Repair it only when it is already broken is a kind of non-maintenance maintenance, which is extremely unfavorable to the safe operation of the whole set of equipment and the service life of the electric actuator. The potential for emergency shutdown accidents is extremely dangerous, the resulting loss is also huge. For example, a petrochemical company in Tianjin has a complete set of production equipment imported from Germany. Since it was put into production in 1981, it has never been overhauled since 1996. At that time, several key stuffing valves were found to have leaked, and German manufacturers no longer produce such kind of special electric actuators, if they are reordered, not only the price is expensive, but also have a long delivery time, which brings huge economic losses. Therefore, the preventive maintenance and repair measures of industrial high-temperature and high-voltage electric actuators are the most economical and reliable ways to solve the leakage and prolong the service life of electric actuators.

    电动执行器如果在无保养性维修的情况下，一旦泄漏，往往已经是损坏非常严重了，这不仅增大了修复的难度，而且常常甚至已经丧失维修的可能和价值。因此，对于组织和管理完善的执行器维修工作来说，不仅有关人员要有相应的意识，更重要的是预防和保养措施，即定期的对执行器进行检查(例如，执行器相对于外界的密封性，执行器在关闭状态下的密闭性等等)。预防性维修电动执行器的关键是在次发现执行器有泄漏现象时，立即对电动执行器进行修复，因为流通的介质即使在极微小的密封面坏损的情况下，也能在短时间内引起密封面的大面积坏损，以致造成昂贵的维修成本。

    If the electric actuator in the condition of non-maintenance maintenance, once it is leaked, the damage is often very serious, which not only increases the difficulty of repair, but also even loses the possibility and value of maintenance. Therefore, for the perfect organization and management of electric actuator maintenance work, not only relevant personnel should have a corresponding awareness, but also there must have preventive and maintenance measures, that is, carry out regular inspection of electric actuators (for example, the sealing property of electric actuator relative to the outside world, the impermeability of the electric actuator in the closed state, etc.). The key to preventive maintenance of the electric actuator is to repair the electric actuator immediately when it is first discovered that there is a leak in the electric actuator, because the medium in circulation even in the case of very small sealing surface damage, it can cause a large area of the sealing surface damage in a short time, resulting in expensive maintenance costs.

    中英合资天蝶阀门的售后服务与产品维修体系是相当健全与完善的，我们承诺：

    The Sino-British joint venture Tandy Valve 's after-sales service and product maintenance system is very sound and perfect , we promise:

1）我厂产品在质保期内，实行“三包”服务（包退、包换、包修）。

1） I plant products in the warranty period, the implementation of the“three guarantees” service(Guarantee for returns, replacement, package repair ).

2）对用户投诉质量问题，立即作出反应，售后服务人员在12～36小时赶赴现场。

2） To respond immediately to the quality problem of users' complaints, and the after-sale service personnel in 12 ~ 36 hours to the scene.

3 ）对售后服务，要求用户填写服务后的质量，反馈信息表，作出鉴定意见，以便改进我们的服务工作。

3 ) To improve our service work, after service, users are required to fill in the quality of service, feedback information form, and make appraisal opinions.

4）售后服务部建立“售后服务跟踪信息”（即“用户档案”），记录设备发货时间、设备使用情况、贵方信息及历次售后服务的记录，定期进行跟踪和回访。

4 ) The after-sale service department establishes the " after-sale service tracking information " ( that is, " User file " ), and records the delivery time and equipment usage of the equipment, your contact information and previous after-sales service records, regular follow-up and return visit.

5）每次售后服务结束后，请贵方填写《售后服务工作回单》，回厂后编写《售后服务工作报告》。

5） After the after-sale service is over, please fill in the " After-sales Service Return Form " and write " After-sales Service Report " after returning to the factory.

6）我公司通过销售渠道，主动向贵方了解产品使用和改进信息，并将贵方的反映和投诉信息整理成专门的台帐，及时反馈到厂内相关部门进行处理，并定期向管理都代表汇报处理结果。

6） Through the sales channels, our company take the initiative to understand the use of products and improve information, and organize your reflection and complaint information into a special account, timely feedback to the relevant departments in the factory for processing, and regularly report the results to the management.

7）可以直接致公司服务专线转售后部。

7）You can directly call the company switchboard service telephone resale rear.