HI-1710微波泄漏检测仪

HI-1710微波泄漏检测仪

参考价: 面议

具体成交价以合同协议为准
2021-08-20 10:13:29
235
产品属性
关闭
西安凯跃电子科技有限公司

西安凯跃电子科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

HI-1710微波泄漏检测仪

详细介绍

HI-1710微波泄漏检测仪

HI1710A微波测量系统采用50/60Hz,100-240V的具有瞬变保护装置的电路供电,操作仪器的面板的电源开关即可打开或和关闭仪器,仪器提供二个不同时间响应特性,符合CDRH的CFR 1030.10微波炉的性能标准要求的快速自动扫描系统。
HI1710A微波测量系统探头(HI2623)是一个直径为5cm的圆锥体,满足CDRH性能标准要求,通过电缆连接仪器面板接口,从HI1710A读出数据。
HI1710A微波测量系统具体模拟图形显示,数字报警设置,RS232接口连接计算机进行控制,打印机接口,模拟信号输出。通过RS232接口,在实验室可以探访到所有测试数据,实现半自动产品检测质量保证系统。峰值保持和清零按键使测量更加准确,重现性更好。
特性:
校准:2450MHz.在ISM(工业、科学及医疗设备)范围内
量程:4量程,分别为0-1, 0-2, 0-5, 0-10mW/cm2。
响应特性: F1 (慢速) –小于3秒
F2 (快速) – 小于1秒
功率密度:2.0 W/cm2 (2000mW/cm2)
输入功率:100-240V,0.8-0.4A(max.),50-60Hz
保险丝:250V,1.0A,型号T (5 mmx20mm)
输入控制:
Zero调零位-干燥开关关闭到零。
RS-232-标准通信输入。
控制输出:
Alarm Output报警输出- 从背部面板连接(Alarm Output24V 1 Amp)
analog output模拟输出:从背部面板连接(analog output 4 VDC max. 1 mA max.)。
RS-232 :从背部面板连接(RS-232)标准通信输出。
环境:
温度:15- 40℃
湿度: 5%-95%,无冷凝
尺寸:311x254x127mm
探头:HI2623)
探头长度: 305mm
电缆: 2.74米
运输重量:3.6 KG

HI-1710A Microwave Oven Survey Meter
The HI-1710A combines the proven and reliable diode sensing technology of the Holaday Microwave Survey Meters with the digital processing techniques developed for automatic oven scanning.
Key Features
Analog bar graph
Auto-ranging
Digital Alarm Set
Optional Remote Zero
Removable Sensing Probe
RS-232 Interface
Serial Printer Output
Description
The RS232 interface allows easy adapting of the unit to computerized data acquisition in laboratory studies and semi-automatic production test systems. Digital Peak-Hold and Push Button Zeroing aid in improving testing productivity and reducing errors. Digital filters, selected from the front panel, provide the “Fast” or “Slow” responses familiar to analog survey instrument users. Built in self-test sequences test meter performance at turn-on and each time the meter is zeroed. Diagnostic functions accessed from the front panel give quick indications of meter status.
Product Testing
On power-up, the HI-1710A is automatically configured for normal production testing, relieving the operator of a complicated setup operation. Simply activating the Peak-Hold feature from the front panel and adding a serial printer results in a formatted RF leakage report each time the ZERO key is pressed. With the Remote Zero Option, testing and reporting are accomplished without reaching to touch the instrument or setting down the probe for even greater operator efficiency. The Remote Zero Chamber provides a location shielded from stray RF fields by simply inserting the probe. An optional alarm output contact transfer provides remote signaling capability (24 VAC, 1A). The separable probe/pre-amp assembly (HI-2623) means that daily ellipticity checks and periodic calibration checks can be made without removing the instrument from service. Spare probes, available from Holaday, can be pre-checked for immediate exchange with no meter down time. Auto-ranging and the bar graph display make it quicker and easier for the operator to accurately perform oven leakage testing.
Laboratory Measurement
The HI-1710A is ideally suited for engineering studies with a 0-1Vdc analog output for chart recorders and plotters. The remote control and reading features allows use in many automated data acquisition configurations.
Standard Configuration
Digital Alarm Set
RS232 Interface for Computer Control
Electrical Specifications
Frequency:2450 MHz
Ranges:0-1, 0-2, 0-5, 0-10 mW/cm2
Physical Specifications
Cable length:1.2 m (3.94 ft)
Probe Length:30 cm (11.81 inches)
Specifications
Power Supply:100 - 240 VAC 50/60 Hz

上一篇:辐射检测仪的工作原理 下一篇:太阳辐射传感器工作原理解析-云境天合2024顺丰包邮全+境+派+送
热线电话 在线询价
提示

仪表网采购电话