$item.Name

首页>电子元器件>其它电子元器件>其它

参考价:

  • 面议

L D定量脱压式稀油分配器/定量容积式稀油分配器

具体成交价以合同协议为准

2025-04-11深圳市
型号
该企业相似产品
位移传感器
产品简介
详细信息LD定量脱压式稀油分配器/定量容积式稀油分配器工作原理A:计量活塞动作行程B:伞形双向阀动作行程见上图,从润滑泵压送的油从主管A注入,并将伞形双向阀B向推开流入,通过通路C压送活塞室到F内
详细信息

详细信息


LD定量脱压式稀油分配器/定量容积式稀油分配器


工作原理
A:计量活塞动作行程
B :伞形双向阀动作行程见上图,从润滑泵压送的油从主管A注入,并将伞形双向阀B向推开流入,通过通路C压送活塞室到F内。受压力油作用下计量活塞向下动作弹簧G被压缩蓄油,从而进行计量蓄油,当主管A内油压被释放〈即卸压〉,伞形阀B因压力差而动作,同时开启吐出口E,于是活室内计量蓄油通过吐出口E送入油管H而将油输送到润滑点, 信号销I当计量蓄油时突出.而供油给润滑点时缩回,从而确认分配动作完成情况。


A: metering piston action schedule
B: the action trip of the umbrella type two-way valve is shown in the figure above. The oil from the lubrication pump is injectedfrom the director A, and the umbrella-type two-way valve B is pushed open. Push the piston chamber to F through the channel C.The piston moves downward under the action of pressure oil.The spring G is compressed.Thus the measurement of oil storage.When the oil pressure is released in charge of A(the discharge pressure). The umbrella valve B moves with pressure difference. At the same time, it opens the outlet E, so the living room measures the oil storage.The oil is transported to the lubrication point by outlet E to the pipe H, and the signal pin I is prominent when measuring the oil storage. When the oil is supplied to the lubrication point, it is retracted to confirm the completion of the distribution.
相关技术文章

同类产品推荐

提示

仪表网采购电话

温馨提示

该企业已关闭在线交流功能

请拨打电话联系