免费会员 经销商
参考价:
具体成交价以合同协议为准
免费会员 经销商
小量样品适配器由圆柱形的样品室和转子构成,可以在一定剪切率下进行测量。它可以用于Brookfield所有的标准粘度计和流变仪。
拆装式样品杯
小量样品适配器的设计可以很容易就能更换样品杯,而不影响粘度计和恒温水浴的使用。这意味着在一定条件下,可以进行一系列样品的连续测量。
温度控制
样品杯外套有水浴夹套,所以通过Brookfield恒温水浴外部循环接口,可以很准确地进行恒温。转子的搅拌动作,加上样品量很少,能够将样品温度的不均匀性减少到zui低。如果选购带温度探头的小量样品适配器,使用在DV-I+、DV-II+PRO和DV-III_ULTRA仪器上,可以直接在一起显示屏上显示样品的温度值,温度控制的范围在-15℃-100℃。
圆柱形计和结构
小量样品适配器的圆柱形计和结构能够提供很准确的粘度测量,并且可以进行准确的剪切率条件下测量。
一次性样品杯
对于很难清洁的样品,我们可以提供一次性使用的铝质样品杯,它的尺寸与特制的水浴夹套SSA-DCU的尺寸配合
仪器组成:
水浴夹套
安装托架
一个由客户选定的SC4转子
一个由客户选定的SC4样品杯
隔热盖
带连接头的延长钩
包装箱
SA小量样品适配器粘度测量范围 cP(mPa•s) | |||||
MODEL | Spindle:SC4-18 | Spindle:SC4-31 | Spindle:SC4-34 | Spindle:SC4-16 | Spindle:SC4-25Z(316 s/s only) |
Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-8R(P) | Sample Chamber:* SC4-13R(P) | |
Sample Volume:6.7ml | Sample Volume:9.0ml | Sample Volume:9.4ml | Sample Volume:4.2ml | Sample Volume:16.1ml | |
Shear Rate (sec-1):1.32N | Shear Rate (sec-1):.34N | Shear Rate (sec-1):.28N | Shear Rate (sec-1):.29N | Shear Rate (sec-1):2.2N | |
DV3TLV | 1.2-30K | 12-300K | 24-600K | 48-1.2M | 192-4.8M |
DV2TLV | 1.5-30K | 15-300K | 30-600K | 60-1.2M | 240-4.8M |
DV1MLV | 3-10K | 30-100K | 60-200K | 120-400K | 800-1.6M |
LVT | 5-10K | 50-100K | 100-200K | 200-400K | 800-1.6M |
DV3TRV |
|
|
|
|
|
DV2TRV |
|
|
|
|
|
DV1MRV |
|
|
|
|
|
RVT |
| However, it is possible to use the above |
| ||
DV3THA |
| spindles with any of these instruments. |
| ||
DV2THA |
| Digital Viscometers/Rheometers will |
| ||
DV1MHA |
| automatically calculate viscosity. Please |
| ||
HAT |
| you require information on viscosity range. |
| ||
DV3THB |
|
|
|
|
|
DV2THB |
|
|
|
|
|
DV1MHB |
|
|
|
|
|
HBT |
|
|
|
|
|
SSA小量样品适配器粘度测量范围 cP(mPa•s) | ||||||
MODEL | Spindle:SC4-21 | Spindle:SC4-27(D) | Spindle:SC4-15 | Spindle:SC4-28 | Spindle:SC4-29 | Spindle:SC4-14 |
Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-7R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-6R(P) | |
Sample Volume:7.1ml | Sample Volume:10.4ml | Sample Volume:3.8ml | Sample Volume:11.0ml | Sample Volume:13.5ml | Sample Volume:2.1ml | |
Shear Rate (sec-1):.93N | Shear Rate (sec-1):.34N | Shear Rate (sec-1):.48N | Shear Rate (sec-1):.28N | Shear Rate (sec-1):.25N | Shear Rate (sec-1):.40N | |
DV3TLV | Not applicable for historical reasons. However, it is possible | |||||
DV2TLV | to use the above spindles with any of these instruments. | |||||
DV1MLV | Digital Viscometers/Rheometers will automatically calculate | |||||
LVT | if you require information on viscosity range. | |||||
DV3TRV | 20-500K | 100-2.5M | 200-5M | 200-5M | 400-10M | 500-12.5M |
DV2TRV | 25-500K | 125-2.5M | 250-5M | 250-5M | 500-10M | 625-12.5M |
DV1MRV | 50-170K | 250-830K | 500-1.7M | 500-1.7M | 1K-3.3M | 1.25K-4.2M |
RVT | 50-100K | 250-500K | 500-1M | 500-1M | 1K-2M | 1.25K-2.5M |
DV3THA | 40-1M | 200-5M | 400-10M | 400-10M | 800-20M | 1K-25M |
DV2THA | 50-1M | 250-5M | 500-10M | 500-10M | 1K-20M | 1.25K-25M |
DV1MHA | 100-300K | 500-1.7M | 1K-3.3M | 1K-3.3M | 2K-6.7M | 2.5K-8.3M |
HAT | 100-200K | 500-1M | 1K-2M | 1K-2M | 2K-4M | 2.5K-5M |
DV3THB | 160-4M | 800-20M | 1.6K-40M | 1.6K-40M | 3.2K-80M | 4K-100M |
DV2THB | 200-4M | 1K-20M | 2K-40M | 2K-40M | 4K-80M | 5K-100M |
DV1MHB | 400-1.3M | 2K-6.7M | 4K-13.3M | 4K-13.3M | 8K-26.7M | 10K-33.3M |
HBT | 400-800K | 2K-4M | 4K-8M | 4K-8M | 8K-16M | 10K-20M |
M = 1 million | K = 1 thousand N = RPM e.g. Spindle SC4-18 1.32 x 10 (rpm) = 13.2 sec-1 | cP = Centipoise mPa•s = Millipascal•seconds | ||||
N/A = Not applicable for historical reasons. However, it is possible to use any spindle/chamber combination with any torque range. Digital viscometers/rheometers will automatically calculate viscosity. | ||||||
* Examples | ||||||
SC4-13R Sample Chamber | SC4-13RP Sample Chamber with RTD temperature probe | |||||
SC4-13RPY Sample Chamber with RTD temperature probe and cable to viscometer/rheometer | ||||||
SC4-13RD-100 Disposable Sample Chamber available in packages of 100 | ||||||
SC4-27 Stainless Steel Spindle | SC4-27D Disposable Spindle | |||||
† Disposable chamber available in 13R size and requires SC4-45YD water jacket | ||||||
Note: Hasloy C available for some spindles/chambers - call for details | ||||||