免费会员 代理商
参考价:
具体成交价以合同协议为准
免费会员 代理商
EE610差压变送器
测量性能
EE610测量精度可达±0.5 Pa,有多种量程范围可选,分别是± 25 /± 50 / ± 100 Pa和0…100 Pa,用户可通过拨码开关来选择需要的测量范围。
压敏电阻式传感元件,可使产品保持*的长期稳定性能。
输出信号
测量值以模拟信号的方式输出,在弹簧端子上可同时提供电流和电压输出信号。显示屏可显示Pa、mbar、inch、water column或mm H2O等单位。
外壳结构
EE610的外壳防护等级为IP65/NEMA 4,其新颖的外壳结构显著地降低了安装成本。外部安装孔使变送器不用打开封盖即可实现快速安装,从而保护了电子设备免受施工现场的污染。
组态配置
用户可通过拨码开关和电路板上的按钮对EE610进行组态和配置,如:双向或单向压力量程、输出信号、响应时间、显示单元以及背光等。
0...100 Pa
测量范围
±0.5 Pa = 0.5 % FS*
精度- *满量程
± 7000 Pa
负载限制
0-5 V或0-10 V和
0-20 mA或4-20 mA
模拟输出 - 可通过DIP拨码开关选择
Measuring Performance
The EE610 offers selectable measuring ranges of ±25, ±50, ±100 and 0...100 Pa. The long-term stable, piezo-resistive non-flow-through pressure sensing element excludes the risk of cross-contamination.
Analogue Output and Display
The measured data is available as analogue current and voltage output. The graphic display shows the reading in Pa, mbar, inch water column or mm H2O.
Functional and Robust
The IP65 / NEMA 4 enclosure facilitates easy mounting and minimizes installation costs. External mounting holes allow installation with closed cover.
Configurable and Adjustable
The setup and adjustment of the EE610 can be performed with DIP-switches and push buttons on the electronics board: choice of pressure range, output signal, time constant, display units and backlight.
Key Features