纳秒级高压脉冲电源-仪表网-手机站

首页>电子元器件>电源>脉冲电源

参考价：

面议

纳秒级高压脉冲电源

具体成交价以合同协议为准

2023-06-12

型号

成都千贝科技有限公司

免费会员 其他

进入商铺全部产品

该企业相似产品

agilent5530双频激光干涉仪 在线询价

Spellman高压电源 在线询价

主营产品公司介绍

产品简介

FEATURES:ImpulseNoiseSimulatorINS-4020/4040aremoreconvenientanduser-friendlythanformermodels,thankstothefollowingfeatures

详细信息

FEATURES:

Impulse Noise Simulator INS-4020/4040 are more convenient and user-friendly than former models, thanks to the following features.
• Push button setting for all parameters
• Terminal block outlet panel
• Sweep operation for output voltage, phase angle and repetition cycle
• Up to 5 test settings stored in the momory
• Floating output
• Coupling mode selection by plugging the supplied coaxial connector to the selected port
• Easily changeable mercury relay
• Built-in 50 ohm terminator
• Easily changeable outlet panels
CE marked

SPECIFICATIONS:

Item		Model
		INS-4020 (2kV)	INS-4040(4kV)
Output voltage		0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step, Sweep mode available	0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step, Sweep mode available
Polarity		Positive or negative
Square wave	Pulse width	50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection)
	Pulse rise time	< 1ns
	Output impedance	50 ohm system (53.5 ohm)
Pulse repetition mode	Variable	10ms ~ 999ms±10%, 1ms step Sweep operation available	16ms ~ 999ms±10%, 1ms step Sweep operation available
	Line phase	50 or 60Hz, Injection phase angle 0~359°, 1° step Sweep operation available
	External	>10ms, Pulse width>1ms TTL/Open collector negative logic	>16ms, Pulse width>1ms TTL/Open collector negative logic
		Also functions for timing reference signals input from an external injection unit
	1 shot	Single pulse injection to the angle which is specified by Line phase setting on the power line, or Single shot without injection power line.
Memory		Up to 5 test settings
Power capacity of equipment under test		AC 240V, DC60V, Single phase, DC60V 16A
Power supply		AC100 ~ 240V 50/60H
Power consumption		140VA
Operating temperature and humidity		15~35°C / 25~75% (No dewing shall occur.)
Dimensions		(W) 430 X (H) 249 X (D) 420 mm(Projections excluded)
Weight		Approx. 19kgs

Included accessories

· Coaxial cable Model: 02-00013A (8 pcs)

o 30 cm length

· SG short plug Model: 02-00106A (1pc)

· Outlet panel Model: 18-00061B (1 pc)

o Terminal block type

o AC240V/16A DC60V/16A maximum

o Leaves the factory with this panel attached to the main unit (INS-4020 or INS-4040)

· AC cable (1pc)

o AC100-115V 3-p, 2.4m

Instruction manual (English / 1 pc)

The built-in injection circuitry has 16A rating for single-phase AC. For test exceeding this current limit or 3-phase application, IJ-4050 shall be used.

This optional unit can extend the EUT supply voltage and current ratings up to 3-phase AC 415V/50A. In conjunction with INS-4020/4040, this unit can operate in the EUT Line Synchronization mode.

SPECIFICATIONS

	Item	Model IJ-4050
	Impulse input	8kV max when the INS-4020/4040 output is not terminated.
	EUT power capacity	3-phase, 5-wire (L1, L2, L3, N, PE) AC415V, 50A
	Coupling mode selection	By short plug connection
	Zero cross detection	Detects L1-L2 voltage and outputs synchronization signal from the SYNC OUT connector
	Dimensions and weight	(W)430 x (H) 200 x (D) 535 mm (Projections excluded) Approx. 25.0 kgs

Model INS-RL2K for INS-4020 或INS-RL2K for INS-4040 ：mercury relay unit for replacement

Model 18-00072A:circuit breaker box(断路保护器)

相关技术文章

同类产品推荐

常用功能直达