• Rated to ASME/ANSI 800 Limited Class for use in all applications requiring 800 Limited Class ratings or below.
• Available in 1" nominal pipe size with 1/8", 3/16", 1/4" or 5/16" orifice, depending on desired flow capacities.
• A micrometer dial position indicator allows fast, precise and repeatable settings.
• Socket weld end connections.
• Both disc and disc seat are hard faced with Stellite for erosion resistance.
• Seating surfaces are ground and lapped for tight shut off, eliminating double valving requirements.
• The integral stem disc is faced with Stellite, then ground and lapped for accurate, leak-free sealing.
• The disc is tapered for maximum controllability over the full stroke of the valve.
• Standard material is carbon steel (ASME SA 105) body with 13% chrome stainless steel trim.
• One-piece drop forged body.
• Graphite packing, complete with braided graphite filament yarn anti-extrusion rings, is standard.
• All Hancock 5505 series valves comply with ASME/ANSI B 16.34 and the ASME Boiler and Pressure Vessel Code, Section 1.

Type: 5505W Angle Body, Socket Weld to ASME B16.11

Size: 1"