$item.Name

首页>分析检测>通信测试>网络分析仪

参考价:

  • 面议
二手54147A标量网络分析仪

具体成交价以合同协议为准

2018-05-14
型号
深圳安吉伦电子仪器有限公司

免费会员 经销商

该企业相似产品
主要销售的仪器有:示波器、网络分析仪、频谱仪、万用表、信号发生器、电源、电子负载、频率计、功率计、综合测试仪、音频分析仪、信号源等高频仪器。
产品简介
★快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、功率和距离误差。★晶体源特别稳定和准确。 ★内置自动化特征包括距离误差
详细信息

二手标量网络分析仪54147A  ANRITSU


    54100A系列网络分析仪可提供设备特性。设备包括:放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。*的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。
★快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源特别稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实可靠的机箱
★传输收益(损耗),群延迟和功率测量
★传输及返回损耗(或SWR)
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统(0.001-1.5GHz)
特点
    54100A系列网络分析仪可提供设备特性。设备包括:放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。*的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。
★快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源特别稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实可靠的机箱
★传输收益(损耗),群延迟和功率测量
★传输及返回损耗(或SWR)
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统(0.001-1.5GHz)
技术指标
Analyzer Measurement modes TransmissiondB,return lossdB,SWRlinearSWR,optiona group delayns,powerdBmprecision return lossdBoptionaldistance-to-fault
Dynamic range -55 to +16dBm,autozeroing with DC detection
Inputs Three,two standard inputs,AB,with optionathird reference channel,ROption 5
Display channels Two channels are used to selectsimultaneouslydisplay any two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R.
Scale resolution 0.1 to 10dBm per division in 0.1dB steps
Cursor functions Searches for trace maximum,minimum,dB level,dBbandwidth,next markeractive marker
Averaging 2,4,8,16,32,64,128,or 256
Limit lines Two limit ines,either single value or multilevel segmented,for each trace.Segmented lines may be made from up to 10individually editable segments.
Auto-zero Performs an AC modulation cyclelowlevel calibration during sweeper ratrace
Save/Recall Thirteen sets of front panel set-ups andthirteen sets of trace memory can be stored in non-volatile instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule trace mask for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44MB floppy disk drive
Autosave Automatically increments the trace datafile namereference number during successive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternay between frequenc yrangesset differently for channel 1channel 2
CW Provides single frequency outputboth channelsturned off
Frequency resolution Rf Model54107A,54109A,54111A:10kHz,Microwavemodels:100khz
Output power Maximum guaranteed levelled output poweris model dependent.
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption
Appli-
cation function Min/Max hold Save the minimummaximum values of successivesweeps or the combination of the two
Cursor functions Automatic cursor seach updates the bandwidth,minimum,ormaximum levels of the displayed trace.
Compression test automation Determines the gain compression point overthe operating freqeuncy range of an ampliffier by successively incrementingthe source powermeasuring the amount of compression until a preset"X"dBlimit is exceeded.
Self test Performs a self test every time power isapplied or when SELF TEST pushbutton is pressed.If an error is detected,adiagnostic code appears,identifying the causelocation of the error.
General Operating temperature 0°to 50℃
Power 48 to 400Hz,300VA
Mass 18kg39lb.
Printer Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and most Epson FX-compatible printers.
Transit case Hard shell case with custom foam inserts,PN:760-183
EMC Meets European community requirements forCE marking
订货信息 Model/Order No. Name
Option 1 Options
Rack mounting with slides
Option 2 70dB RF step attenuator
Option 2A 70dB,20Ghz MW step attenuator
Option 2B 70dB,26.5GHz MW step attenuator
Option 2C 70dB,40GHz MW step attenuator
Option 2D 70dB,50GHz MW step attenuator
Option 4 75Ω source outputavailable to 3.0GHz
Option 5 Add reference channel
Option 6 Add external levelling
Option 7 Internal distance-to-fault software
Option 8 Internal relative group delay software
Option 12 Add front panel cover
Option 13 Add front mounted handles
Option 16 +15V DC supply for millimeter wave source modulesavailablewith<20GHz models only
Option 25 Maintenance manual
Option 26 Extra operationGPIB programming manual
Option 33 Canon printer

相关技术文章

同类产品推荐

企业未开通此功能
详询客服 : 0571-87858618
提示

仪表网采购电话